Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Inrom Construction Industries's PEG Ratio or its related term are showing as below:
XTAE:INRM'
s PEG Ratio Range Over the Past 10 Years
Min: 2.14 Med: 6.28 Max: 98.55
Current: 6.67
During the past 13 years, Inrom Construction Industries's highest PEG Ratio was 98.55. The lowest was 2.14. And the median was 6.28.
XTAE:INRM's PEG Ratio is ranked worse than 85.42% of 144
companies
in the Building Materials industry
Industry Median: 1.14
vs XTAE:INRM: 6.67
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Inrom Construction Industries (XTAE:INRM) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Inrom Construction Industries PEG Ratio Related Terms
Inrom Construction Industries PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Building Materials subindustry, Inrom Construction Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Inrom Construction Industries PEG Ratio vs Building Materials Industry
For the Building Materials industry and Basic Materials sector, Inrom Construction Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Inrom Construction Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Inrom Construction Industries (XTAE:INRM) has a PEG Ratio of 6.67 as of Aug. 17, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Inrom Construction Industries and its competitors. This is near median its historical median of 6.28. Over the past decade, Inrom Construction Industries' PEG Ratio has ranged from 2.14 to 98.55. According to the industry distribution chart, Inrom Construction Industries ranks #123 out of 144 companies in the Building Materials industry, placing it in the top 85.4%.
Is Inrom Construction Industries' PEG Ratio too high?
Inrom Construction Industries' current PEG Ratio of 6.67 is near median its 10-year median of 6.28. Over the past 10 years, this metric has ranged from a low of 2.14 to a high of 98.55. The Building Materials industry median PEG Ratio is 1.14. Inrom Construction Industries' value of 6.67 is 485.1% above this industry median. Based on the distribution chart, Inrom Construction Industries ranks #123 out of 144 companies in the Building Materials industry, which is in the bottom quartile relative to peers. Overall, Inrom Construction Industries has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Inrom Construction Industries' PEG Ratio compare to CRH and VMC?
According to the Building Materials industry distribution chart, Inrom Construction Industries ranks #123 out of 144 companies for PEG Ratio. This places Inrom Construction Industries in the lower half of its industry. The industry median PEG Ratio is 1.14. Inrom Construction Industries' value of 6.67 is 485.1% above this benchmark. Historically, Inrom Construction Industries' own PEG Ratio has ranged from 2.14 to 98.55 over the past decade. While the company's 10-year median is 6.28 vs. the industry median of 1.14, Inrom Construction Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Building Materials company?
The median PEG Ratio among Building Materials companies is 1.14, based on 144 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Inrom Construction Industries's current PEG Ratio of 6.67 is 485.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Inrom Construction Industries and its competitors. For the Building Materials industry, the median PEG Ratio is 1.14 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Inrom Construction Industries's current PEG Ratio is 6.67, which is near median its own 10-year median of 6.28. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Inrom Construction Industries stock overvalued right now?
Based on GuruFocus' analysis, Inrom Construction Industries (XTAE:INRM) is currently considered Modestly Overvalued. The stock's GF Value™ is ₪19.02, compared to a current price of ₪22.76 — trading 19.7% above its estimated fair value. The current PEG Ratio is 6.67, which is near median its 10-year median of 6.28 and 485.1% above the Building Materials industry median of 1.14. Inrom Construction Industries' overall GF Score™ is 77/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Inrom Construction Industries (XTAE:INRM), the current PEG Ratio is 6.67 as of Aug. 17, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Inrom Construction Industries (XTAE:INRM) Overvalued in 2026?
Based on GuruFocus' analysis, Inrom Construction Industries stock appears to be overvalued.
The current stock price of ₪22.76 is trading 19.7% above its estimated GF Value™ of ₪19.02.
GuruFocus considers Inrom Construction Industries to be Modestly Overvalued.
Key valuation signals for XTAE:INRM:
PEG Ratio: 6.67 (near median its 10-year median of 6.28)
GF Value™: ₪19.02 vs. price of ₪22.76 (19.7% above fair value)
Industry Position: 485.1% above the Building Materials median (#123 of 144)
No single metric tells the full story. See the XTAE:INRM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Inrom Construction Industries Ltd is an Israel-based company engaged in the construction sector. The company offers varieties of products and solutions for the construction and renovation industries, for industrial and other uses. It operates through three businesses. The construction solutions business operates, manufactures and markets flooring solutions, environment and landscape and others. Its construction finishing product business offers mortar products for flooring, plaster and special salts and other complementary products including sealants, coatings, and bonding materials. The color products business provides paint products for interior and exterior, decorative colors for special designs, various coatings and more.
77GF Score
Get the complete analysis for XTAE:INRM
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTAE:INRM has been successfully added to your 
