Stabilus SEXTER:STM -1.17%60 PEG Ratio is 6.09 as of Jul. 01, 2026, which is 115% above its 10-year median of 2.83. GuruFocus rates XTER:STM with a GF Score™ of 60/100 and a GF Value™ of €33.32 (Possible Value Trap). The stock has 4 warning signs investors should review. Among 1,280 Industrial Products companies, Stabilus SE ranks worse than 80% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Stabilus SE's PE Ratio without NRI is 23.15. Stabilus SE's 5-Year EBITDA growth rate is 3.80%. Therefore, Stabilus SE's PEG Ratio for today is 6.09.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Stabilus SE's PEG Ratio or its related term are showing as below:
XTER:STM'
s PEG Ratio Range Over the Past 10 Years
Min: 0.16 Med: 2.83 Max: 44.21
Current: 6.09
During the past 13 years, Stabilus SE's highest PEG Ratio was 44.21. The lowest was 0.16. And the median was 2.83.
XTER:STM's PEG Ratio is ranked worse than 80% of 1280
companies
in the Industrial Products industry
Industry Median: 1.885
vs XTER:STM: 6.09
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Stabilus SE (XTER:STM) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Stabilus SE PEG Ratio Related Terms
Stabilus SE PEG Ratio Historical Data
* Premium members only.
The historical data trend for Stabilus SE's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Stabilus SE's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Stabilus SE PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Stabilus SE's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Stabilus SE's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Stabilus SE (XTER:STM) has a PEG Ratio of 6.09 as of Jul. 01, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stabilus SE and its competitors. This is 115% above median its historical median of 2.83. Over the past decade, Stabilus SE's PEG Ratio has ranged from 0.16 to 44.21. According to the industry distribution chart, Stabilus SE ranks #1024 out of 1280 companies in the Industrial Products industry, placing it in the top 80%.
Is Stabilus SE's PEG Ratio too high?
Stabilus SE's current PEG Ratio of 6.09 is 115% above median its 10-year median of 2.83. Over the past 10 years, this metric has ranged from a low of 0.16 to a high of 44.21. The Industrial Products industry median PEG Ratio is 1.89. Stabilus SE's value of 6.09 is 223.1% above this industry median. Based on the distribution chart, Stabilus SE ranks #1024 out of 1280 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Stabilus SE has a GF Score™ of 60/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Stabilus SE's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Stabilus SE ranks #1024 out of 1280 companies for PEG Ratio. This places Stabilus SE in the lower half of its industry. The industry median PEG Ratio is 1.89. Stabilus SE's value of 6.09 is 223.1% above this benchmark. Historically, Stabilus SE's own PEG Ratio has ranged from 0.16 to 44.21 over the past decade. While the company's 10-year median is 2.83 vs. the industry median of 1.89, Stabilus SE has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.89, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Stabilus SE's current PEG Ratio of 6.09 is 223.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stabilus SE and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Stabilus SE's current PEG Ratio is 6.09, which is 115% above median its own 10-year median of 2.83. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Stabilus SE stock overvalued right now?
Based on GuruFocus' analysis, Stabilus SE (XTER:STM) is currently considered Possible Value Trap. The stock's GF Value™ is €33.32, compared to a current price of €15.14 — trading 54.6% below its estimated fair value. The current PEG Ratio is 6.09, which is 115% above median its 10-year median of 2.83 and 223.1% above the Industrial Products industry median of 1.89. Stabilus SE's overall GF Score™ is 60/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Stabilus SE (XTER:STM), the current PEG Ratio is 6.09 as of Jul. 01, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Stabilus SE (XTER:STM) Overvalued in 2026?
Based on GuruFocus' analysis, Stabilus SE stock appears to be undervalued.
The current stock price of €15.14 is trading 54.6% below its estimated GF Value™ of €33.32.
GuruFocus considers Stabilus SE to be Possible Value Trap.
Key valuation signals for XTER:STM:
PEG Ratio: 6.09 (115% above median its 10-year median of 2.83)
GF Value™: €33.32 vs. price of €15.14 (54.6% below fair value)
Industry Position: 223.1% above the Industrial Products median (#1024 of 1280)
No single metric tells the full story. See the XTER:STM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Stabilus SE along with its subsidiaries, manufactures and supplies gas springs, dampers, and vibration isolation products to automotive and industrial customers. It is also involved in the production and distribution of automatic, electromechanical opening and closing systems (motion control solutions) that are mainly used for installation in tailgates. The company's products are used in automotive, navy and railways, commercial vehicles, aerospace, marine and rail, energy and construction, mechanical engineering, industrial machinery and automation, health, recreation, leisure, and furniture industries. Its operating segments are EMEA (Europe, Middle East and Africa), also its key revenue-generating segment, the Americas (North and South America), and APAC (Asia-Pacific).
60GF Score
Get the complete analysis for XTER:STM
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTER:STM has been successfully added to your 
