Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Danieli & C. Officine Meccaniche SpASTU:DAS -0.88%74 Peter Lynch Fair Value is €65.90 as of Jul. 14, 2026, which is 100% below its 10-year median of 0.44. GuruFocus rates STU:DAS with a GF Score™ of 74/100 and a GF Value™ of €29.05 (Significantly Overvalued). The stock has 6 warning signs investors should review. Among 969 Industrial Products companies, Danieli & C. Officine Meccaniche SpA ranks better than 65.74% on this metric.
Peter Lynch Fair Value applies to growing companies. The ideal range for the growth rate is between 10 - 20% a year. Peter Lynch thinks that the fair P/E value for a growth company equals its growth rate, that is PEG = 1. The earnings here is trailing twelve month (TTM) earnings. For non-bank companies, the growth rate we use is the average growth rate for EBITDA per share over the past 5 years. For Banks, the growth rate we use is the average growth rate for Book Value per share over the past 5 years. If 5-Year Growth Rate is greater than 25% a year, we use 25. If 5-Year Growth Rate is smaller than 5% a year, we do not calculate Peter Lynch Fair Value.
The historical rank and industry rank for Danieli & C. Officine Meccaniche SpA's Peter Lynch Fair Value or its related term are showing as below:
STU:DAS'
s Price-to-Peter-Lynch-Fair-Value Range Over the Past 10 Years
Min: 0.35 Med: 0.44 Max: 1.03
Current: 1.02
During the past 13 years, the highest Price to Peter Lynch Fair Value Ratio of Danieli & C. Officine Meccaniche SpA was 1.03. The lowest was 0.35. And the median was 0.44.
STU:DAS's Price-to-Peter-Lynch-Fair-Value is ranked better than 65.74% of 969
companies
in the Industrial Products industry
Industry Median: 1.46
vs STU:DAS: 1.02
Note: Please don't confuse Peter Lynch Fair Value with the value reached in Peter Lynch Chart.
Danieli & C. Officine Meccaniche SpA (STU:DAS) Peter Lynch Fair Value Explanation
Peter Lynch Fair Value applies to growing companies. The ideal range for the growth rate is between 10 - 20% a year.
Peter Lynch thinks that the fair P/E value for a growth company equals its growth rate, that is PEG = 1. The earnings here is trailing twelve month (TTM) earnings. For non-bank companies, the growth rate we use is the average growth rate for EBITDA per share over the past 5 years. For Banks, the growth rate we use is the average growth rate for Book Value per share over the past 5 years.
Please don't confuse Peter Lynch Fair Value with the value reached in Peter Lynch Chart. In Peter Lynch chart, a fixed P/E ratio of 15 is used to draw the Earnings Line. Therefore the value reached has a P/E ratio of 15. But in Peter Lynch Fair Value calculation, P/E equals to the growth rate of EBITDA per share over the past 5 years, which is 20 instead of 15 in this case.
Danieli & C. Officine Meccaniche SpA's Price to Peter Lynch Fair Value Ratio for today is calculated as
Price to Peter Lynch Fair Value
=
Share Price
/
Peter Lynch Fair Value
=
67.40
/
65.90
=
1.02
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Peter Lynch Fair Value Related Terms
Danieli & C. Officine Meccaniche SpA Peter Lynch Fair Value Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA Peter Lynch Fair Value Chart
STU:DAS vs GEV, ETN, PH: Peter Lynch Fair Value Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's Price-to-Peter-Lynch-Fair-Value, along with its competitors' market caps and Price-to-Peter-Lynch-Fair-Value data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA Price-to-Peter-Lynch-Fair-Value vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's Price-to-Peter-Lynch-Fair-Value distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's Price-to-Peter-Lynch-Fair-Value falls into.
For company reported semi-annually, GuruFocus uses latest annual data as the TTM data. Danieli & C. Officine Meccaniche SpA's EPS without NRI for the trailing twelve months (TTM) ended in Dec. 2025 was €3.30.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
** Please be aware that the 5-Year TTM EBITDA Growth Rate is calculated based on TTM data over the last 5 years. For quarterly reported companies, the TTM data adds up the quarterly data reported by the company within the most recent 12 months. For companies that report semi-annually, annually, or do not have enough quarterly data, GuruFocus uses the annual data as the TTM data.
If 5-Year Earnings Growth Rate is greater than 25% a year, we use 25.
If 5-Year Earnings Growth Rate is smaller than 5% a year, we do not calculate Peter Lynch Fair Value.
Please note that we use the 5-year average growth rate of EBITDA per share as the growth rate for non-bank companies, as EBITDA growth is subject to less manipulations than net earnings per share. For banks, we use the 5-year average growth rate of Book Value per share as the growth rate. The reason is that EBITDA is not applicable to Banks and Book value is a relative important measurement for Banks. In the calculation, PEG=1 because Peter Lynch thinks that the fair P/E ratio of the growth stock is equal to its earnings growth rate.
What does a Peter Lynch Fair Value of €65.90 mean?
Danieli & C. Officine Meccaniche SpA (STU:DAS) has a Peter Lynch Fair Value of €65.90 as of Jul. 14, 2026. Peter Lynch Fair Value is the stock value based on a company's current earnings and five-year earnings growth, assuming a PEG of one. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. This is 14877% above median its historical median of 0.44. Over the past decade, Danieli & C. Officine Meccaniche SpA's Peter Lynch Fair Value has ranged from 0.35 to 1.03. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #332 out of 969 companies in the Industrial Products industry, placing it in the top 34.3%.
Is Danieli & C. Officine Meccaniche SpA's Peter Lynch Fair Value too high?
Danieli & C. Officine Meccaniche SpA's current Peter Lynch Fair Value of €65.90 is 14877% above median its 10-year median of 0.44. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 1.03. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #332 out of 969 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 74/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's Peter Lynch Fair Value compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #332 out of 969 companies for Peter Lynch Fair Value. This puts Danieli & C. Officine Meccaniche SpA in the upper half of its industry. The industry median Peter Lynch Fair Value is 1.46. Historically, Danieli & C. Officine Meccaniche SpA's own Peter Lynch Fair Value has ranged from 0.35 to 1.03 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Peter Lynch Fair Value for an Industrial Products company?
The median Peter Lynch Fair Value among Industrial Products companies is 1.46, based on 969 companies in the industry. Companies in the top quartile (top 25%) have a Peter Lynch Fair Value significantly above this median, while those in the bottom quartile fall well below. However, Peter Lynch Fair Value should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Peter Lynch Fair Value mean?
A high Peter Lynch Fair Value can signal that a stock is expensive relative to its fundamentals. Peter Lynch Fair Value is the stock value based on a company's current earnings and five-year earnings growth, assuming a PEG of one. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median Peter Lynch Fair Value is 1.46 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current Peter Lynch Fair Value is €65.90, which is 14877% above median its own 10-year median of 0.44. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (STU:DAS) is currently considered Significantly Overvalued. The stock's GF Value™ is €29.05, compared to a current price of €67.40 — trading 132% above its estimated fair value. The current Peter Lynch Fair Value is €65.90, which is 14877% above median its 10-year median of 0.44. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 74/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Peter Lynch Fair Value calculated?
Peter Lynch Fair Value is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (STU:DAS), the current Peter Lynch Fair Value is €65.90 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (STU:DAS) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €67.40 is trading 132% above its estimated GF Value™ of €29.05.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for STU:DAS:
Peter Lynch Fair Value: €65.90 (14877% above median its 10-year median of 0.44)
GF Value™: €29.05 vs. price of €67.40 (132% above fair value)
No single metric tells the full story. See the STU:DAS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
74GF Score
Get the complete analysis for STU:DAS
Peter Lynch Fair Value is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:DAS has been successfully added to your 
