Ringmetall SESTU:HP3 +1.52%80 Pretax Margin % is 4.84% as of Jun. 2025, which is 34% below its 10-year median of 7.36. GuruFocus rates STU:HP3 with a GF Score™ of 80/100 and a GF Value™ of €3.62 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 3,027 Industrial Products companies, Ringmetall SE ranks worse than 52.86% on this metric.
The historical rank and industry rank for Ringmetall SE's Pretax Margin % or its related term are showing as below:
STU:HP3'
s Pretax Margin % Range Over the Past 10 Years
Min: 1.08 Med: 7.36 Max: 11.34
Current: 5.2
STU:HP3's Pretax Margin % is ranked worse than 52.86% of 3027
companies
in the Industrial Products industry
Industry Median: 5.82
vs STU:HP3: 5.20
Ringmetall SE (STU:HP3) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Ringmetall SE Pretax Margin % Related Terms
Ringmetall SE Pretax Margin % Historical Data
* Premium members only.
The historical data trend for Ringmetall SE's Pretax Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
STU:HP3 vs SNA, RBC, LECO: Pretax Margin % Comparison
For the Tools & Accessories subindustry, Ringmetall SE's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ringmetall SE Pretax Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Ringmetall SE's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Ringmetall SE's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ringmetall SE (STU:HP3) has a Pretax Margin % of 4.84% as of Jun. 2025. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Ringmetall SE and its competitors. This is 34% below median its historical median of 7.36. Over the past decade, Ringmetall SE's Pretax Margin % has ranged from 1.08 to 11.34. According to the industry distribution chart, Ringmetall SE ranks #1600 out of 3027 companies in the Industrial Products industry, placing it in the top 52.9%.
Is Ringmetall SE's Pretax Margin % too high?
Ringmetall SE's current Pretax Margin % of 4.84% is 34% below median its 10-year median of 7.36. Over the past 10 years, this metric has ranged from a low of 1.08 to a high of 11.34. The Industrial Products industry median Pretax Margin % is 5.82. Ringmetall SE's value of 4.84% is 16.8% below this industry median. Based on the distribution chart, Ringmetall SE ranks #1600 out of 3027 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Ringmetall SE has a GF Score™ of 80/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Ringmetall SE's Pretax Margin % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Ringmetall SE ranks #1600 out of 3027 companies for Pretax Margin %. This places Ringmetall SE in the lower half of its industry. The industry median Pretax Margin % is 5.82. Ringmetall SE's value of 4.84% is 16.8% below this benchmark. Historically, Ringmetall SE's own Pretax Margin % has ranged from 1.08 to 11.34 over the past decade. While the company's 10-year median is 7.36 vs. the industry median of 5.82, Ringmetall SE has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for an Industrial Products company?
The median Pretax Margin % among Industrial Products companies is 5.82, based on 3,027 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ringmetall SE's current Pretax Margin % of 4.84% is 16.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Ringmetall SE and its competitors. For the Industrial Products industry, the median Pretax Margin % is 5.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ringmetall SE's current Pretax Margin % is 4.84%, which is 34% below median its own 10-year median of 7.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ringmetall SE stock overvalued right now?
Based on GuruFocus' analysis, Ringmetall SE (STU:HP3) is currently considered Modestly Undervalued. The stock's GF Value™ is €3.62, compared to a current price of €2.68 — trading 26% below its estimated fair value. The current Pretax Margin % is 4.84%, which is 34% below median its 10-year median of 7.36 and 16.8% below the Industrial Products industry median of 5.82. Ringmetall SE's overall GF Score™ is 80/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Ringmetall SE (STU:HP3), the current Pretax Margin % is 4.84% as of Jun. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ringmetall SE (STU:HP3) Overvalued in 2026?
Based on GuruFocus' analysis, Ringmetall SE stock appears to be undervalued.
The current stock price of €2.68 is trading 26% below its estimated GF Value™ of €3.62.
GuruFocus considers Ringmetall SE to be Modestly Undervalued.
Key valuation signals for STU:HP3:
Pretax Margin %: 4.84% (34% below median its 10-year median of 7.36)
GF Value™: €3.62 vs. price of €2.68 (26% below fair value)
Industry Position: 16.8% below the Industrial Products median (#1600 of 3027)
No single metric tells the full story. See the STU:HP3 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ringmetall SE is engaged in supplying industrial packaging solutions with a focus on packaging components for industrial drums and container systems. The group operates through two reportable segments: Closure Systems and Liner. The Closure Systems segment is involved in the manufacture and sale of clamping rings, closures, lids, seals, handles, and products for pipes and pipe connections. The Liner segment focuses on the manufacture and sale of drum liners and mono-films used in industrial packaging applications. The company mainly generates its revenue from the Industrial Packaging business.
80GF Score
Get the complete analysis for STU:HP3
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:HP3 has been successfully added to your 
