Craftsman Automation has a quick ratio of 0.61. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for Craftsman Automation's Quick Ratio or its related term are showing as below:
BOM:543276'
s Quick Ratio Range Over the Past 10 Years
Min: 0.34 Med: 0.47 Max: 0.66
Current: 0.61
During the past 9 years, Craftsman Automation's highest Quick Ratio was 0.66. The lowest was 0.34. And the median was 0.47.
BOM:543276's Quick Ratio is ranked worse than 81.83% of 1332
companies
in the Vehicles & Parts industry
Industry Median: 1.06
vs BOM:543276: 0.61
Craftsman Automation (BOM:543276) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Craftsman Automation Quick Ratio Related Terms
Craftsman Automation Quick Ratio Historical Data
* Premium members only.
The historical data trend for Craftsman Automation's Quick Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Craftsman Automation's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Craftsman Automation Quick Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Craftsman Automation's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Craftsman Automation's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Craftsman Automation's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Craftsman Automation (BOM:543276) has a Quick Ratio of 0.61 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Craftsman Automation and its competitors. This is 30% above median its historical median of 0.47. Over the past decade, Craftsman Automation's Quick Ratio has ranged from 0.34 to 0.66. According to the industry distribution chart, Craftsman Automation ranks #1090 out of 1332 companies in the Vehicles & Parts industry, placing it in the top 81.8%.
Is Craftsman Automation's Quick Ratio too high?
Craftsman Automation's current Quick Ratio of 0.61 is 30% above median its 10-year median of 0.47. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 0.66. The Vehicles & Parts industry median Quick Ratio is 1.06. Craftsman Automation's value of 0.61 is 42.5% below this industry median. Based on the distribution chart, Craftsman Automation ranks #1090 out of 1332 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Craftsman Automation has a GF Score™ of 89/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Craftsman Automation's Quick Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Craftsman Automation ranks #1090 out of 1332 companies for Quick Ratio. This places Craftsman Automation in the lower half of its industry. The industry median Quick Ratio is 1.06. Craftsman Automation's value of 0.61 is 42.5% below this benchmark. Historically, Craftsman Automation's own Quick Ratio has ranged from 0.34 to 0.66 over the past decade. While the company's 10-year median is 0.47 vs. the industry median of 1.06, Craftsman Automation has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Vehicles & Parts company?
The median Quick Ratio among Vehicles & Parts companies is 1.06, based on 1,332 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Craftsman Automation's current Quick Ratio of 0.61 is 42.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Craftsman Automation and its competitors. For the Vehicles & Parts industry, the median Quick Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Craftsman Automation's current Quick Ratio is 0.61, which is 30% above median its own 10-year median of 0.47. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Craftsman Automation stock overvalued right now?
Based on GuruFocus' analysis, Craftsman Automation (BOM:543276) is currently considered Fairly Valued. The stock's GF Value™ is ₹8,655.11, compared to a current price of ₹9,276.95 — trading 7.2% above its estimated fair value. The current Quick Ratio is 0.61, which is 30% above median its 10-year median of 0.47 and 42.5% below the Vehicles & Parts industry median of 1.06. Craftsman Automation's overall GF Score™ is 89/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Craftsman Automation (BOM:543276), the current Quick Ratio is 0.61 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Craftsman Automation (BOM:543276) Overvalued in 2026?
Based on GuruFocus' analysis, Craftsman Automation stock appears to be overvalued.
The current stock price of ₹9,276.95 is trading 7.2% above its estimated GF Value™ of ₹8,655.11.
GuruFocus considers Craftsman Automation to be Fairly Valued.
Key valuation signals for BOM:543276:
Quick Ratio: 0.61 (30% above median its 10-year median of 0.47)
GF Value™: ₹8,655.11 vs. price of ₹9,276.95 (7.2% above fair value)
Industry Position: 42.5% below the Vehicles & Parts median (#1090 of 1332)
No single metric tells the full story. See the BOM:543276 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Craftsman Automation Ltd is engaged in the business of manufacturing engineering components, sub-assemblies, products and rendering of contract manufacturing services to various industries. It has three segments Powertrain; Aluminium Products; and Industrial & Engineering. It generates majority of revenue from Aluminium Products which develops, manufactures, sells its goods and services consisting of aluminium products to the manufacturers of two wheelers, passenger vehicles and commercial vehicles and products for power transmission and other industrial usage. Its products are CYLINDER BLOCK, CYLINDER HEAD, CAMSHAFTS, TRANSMISSION HOUSINGS, BEARING CAP, DIFFERENTIAL CARRIER HOUSING, Powertrain Parts, Structural parts, E-Vehicle Parts, GEAR AND GEAR BOXES, MATERIAL HANDLING.
89GF Score
Get the complete analysis for BOM:543276
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543276 has been successfully added to your 
