Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jyoti CNC Automation (BOM:544081) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Jyoti CNC Automation Quick Ratio Related Terms
Jyoti CNC Automation Quick Ratio Historical Data
* Premium members only.
The historical data trend for Jyoti CNC Automation's Quick Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:544081 vs GEV, ETN, PH: Quick Ratio Comparison
For the Specialty Industrial Machinery subindustry, Jyoti CNC Automation's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jyoti CNC Automation Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Jyoti CNC Automation's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Jyoti CNC Automation's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Jyoti CNC Automation's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Jyoti CNC Automation (BOM:544081) has a Quick Ratio of 0.00 as of Jun. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Jyoti CNC Automation and its competitors. Over the past decade, Jyoti CNC Automation's Quick Ratio has ranged from 0.28 to 1.36. According to the industry distribution chart, Jyoti CNC Automation ranks #1689 out of 3083 companies in the Industrial Products industry, placing it in the top 54.8%.
Is Jyoti CNC Automation's Quick Ratio too high?
Jyoti CNC Automation's current Quick Ratio is 0.00. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 1.36. Based on the distribution chart, Jyoti CNC Automation ranks #1689 out of 3083 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Jyoti CNC Automation has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Jyoti CNC Automation's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Jyoti CNC Automation ranks #1689 out of 3083 companies for Quick Ratio. This places Jyoti CNC Automation in the lower half of its industry. The industry median Quick Ratio is 1.37. Historically, Jyoti CNC Automation's own Quick Ratio has ranged from 0.28 to 1.36 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.37, based on 3,083 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Jyoti CNC Automation and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jyoti CNC Automation's current Quick Ratio is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jyoti CNC Automation stock overvalued right now?
Based on GuruFocus' analysis, Jyoti CNC Automation (BOM:544081) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹1,357.95, compared to a current price of ₹1,029.25 — trading 24.2% below its estimated fair value. The current Quick Ratio is 0.00. Jyoti CNC Automation's overall GF Score™ is 69/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Jyoti CNC Automation (BOM:544081), the current Quick Ratio is 0.00 as of Jun. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jyoti CNC Automation (BOM:544081) Overvalued in 2026?
Based on GuruFocus' analysis, Jyoti CNC Automation stock appears to be undervalued.
The current stock price of ₹1,029.25 is trading 24.2% below its estimated GF Value™ of ₹1,357.95.
GuruFocus considers Jyoti CNC Automation to be Modestly Undervalued.
Key valuation signals for BOM:544081:
Quick Ratio: 0.00
GF Value™: ₹1,357.95 vs. price of ₹1,029.25 (24.2% below fair value)
No single metric tells the full story. See the BOM:544081 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jyoti CNC Automation Ltd is a manufacturer of CNC machines. It is a manufacturer of simultaneous 5-Axis CNC machines and has a diverse portfolio of CNC machines including CNC Turning Centers, CNC Turn Mill Centers, CNC Vertical Machining Centers (VMCs), CNC Horizontal Machining Centers (HMCs), simultaneous 3-Axis CNC machining Centers, simultaneous 5-Axis CNC machining Centers and multi-tasking machines. It operates only in one segment, Manufacturing of Metal Cutting CNC Machine.
69GF Score
Get the complete analysis for BOM:544081
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:544081 has been successfully added to your 
