Lloyds Engineering Works has a quick ratio of 2.05. It generally indicates good short-term financial strength.
The historical rank and industry rank for Lloyds Engineering Works's Quick Ratio or its related term are showing as below:
NSE:LLOYDSENGG'
s Quick Ratio Range Over the Past 10 Years
Min: 1.12 Med: 2.03 Max: 3.68
Current: 2.05
During the past 13 years, Lloyds Engineering Works's highest Quick Ratio was 3.68. The lowest was 1.12. And the median was 2.03.
NSE:LLOYDSENGG's Quick Ratio is ranked better than 71.51% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs NSE:LLOYDSENGG: 2.05
Lloyds Engineering Works (NSE:LLOYDSENGG) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Lloyds Engineering Works Quick Ratio Related Terms
Lloyds Engineering Works Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:LLOYDSENGG vs GEV, ETN, PH: Quick Ratio Comparison
For the Specialty Industrial Machinery subindustry, Lloyds Engineering Works's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Lloyds Engineering Works Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Lloyds Engineering Works's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Lloyds Engineering Works's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Lloyds Engineering Works's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Lloyds Engineering Works (NSE:LLOYDSENGG) has a Quick Ratio of 2.05 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Lloyds Engineering Works and its competitors. This is near median its historical median of 2.03. Over the past decade, Lloyds Engineering Works' Quick Ratio has ranged from 1.12 to 3.68. According to the industry distribution chart, Lloyds Engineering Works ranks #875 out of 3071 companies in the Industrial Products industry, placing it in the top 28.5%.
Is Lloyds Engineering Works' Quick Ratio too high?
Lloyds Engineering Works' current Quick Ratio of 2.05 is near median its 10-year median of 2.03. Over the past 10 years, this metric has ranged from a low of 1.12 to a high of 3.68. The Industrial Products industry median Quick Ratio is 1.39. Lloyds Engineering Works' value of 2.05 is 47.5% above this industry median. Based on the distribution chart, Lloyds Engineering Works ranks #875 out of 3071 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Lloyds Engineering Works has a GF Score™ of 86/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Lloyds Engineering Works' Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Lloyds Engineering Works ranks #875 out of 3071 companies for Quick Ratio. This puts Lloyds Engineering Works in the upper half of its industry. The industry median Quick Ratio is 1.39. Lloyds Engineering Works' value of 2.05 is 47.5% above this benchmark. Historically, Lloyds Engineering Works' own Quick Ratio has ranged from 1.12 to 3.68 over the past decade. While the company's 10-year median is 2.03 vs. the industry median of 1.39, Lloyds Engineering Works has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Lloyds Engineering Works's current Quick Ratio of 2.05 is 47.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Lloyds Engineering Works and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Lloyds Engineering Works's current Quick Ratio is 2.05, which is near median its own 10-year median of 2.03. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Lloyds Engineering Works stock overvalued right now?
Based on GuruFocus' analysis, Lloyds Engineering Works (NSE:LLOYDSENGG) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹108.24, compared to a current price of ₹83.94 — trading 22.5% below its estimated fair value. The current Quick Ratio is 2.05, which is near median its 10-year median of 2.03 and 47.5% above the Industrial Products industry median of 1.39. Lloyds Engineering Works' overall GF Score™ is 86/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Lloyds Engineering Works (NSE:LLOYDSENGG), the current Quick Ratio is 2.05 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Lloyds Engineering Works (NSE:LLOYDSENGG) Overvalued in 2026?
Based on GuruFocus' analysis, Lloyds Engineering Works stock appears to be undervalued.
The current stock price of ₹83.94 is trading 22.5% below its estimated GF Value™ of ₹108.24.
GuruFocus considers Lloyds Engineering Works to be Modestly Undervalued.
Key valuation signals for NSE:LLOYDSENGG:
Quick Ratio: 2.05 (near median its 10-year median of 2.03)
GF Value™: ₹108.24 vs. price of ₹83.94 (22.5% below fair value)
Industry Position: 47.5% above the Industrial Products median (#875 of 3071)
No single metric tells the full story. See the NSE:LLOYDSENGG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Lloyds Engineering Works Ltd is a Designer and Manufacturer of Heavy Equipment, Machinery and Systems for Hydro Carbon Sector, Oil & Gas, Steel Plants, Power Plants, Nuclear Plant Boilers and Turnkey Projects. The Company has single business Segment namely Engineering Products and Services.Engineering Business was established in 1974 at Andheri, Mumbai and subsequently shifted its shop and converted into heavy fabrication, machine building unit at Murbad, Thane Dist. Maharashtra. Work shop is located at Murbad District in Thane.
86GF Score
Get the complete analysis for NSE:LLOYDSENGG
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:LLOYDSENGG has been successfully added to your 
