STU:MBH3'
s Quick Ratio Range Over the Past 10 Years
Min: 1.67 Med: 2.06 Max: 2.62
Current: 1.67
During the past 13 years, Maschinenfabrik Berthold Hermle AG's highest Quick Ratio was 2.62. The lowest was 1.67. And the median was 2.06.
STU:MBH3's Quick Ratio is ranked better than 60.89% of 3071
companies
in the Industrial Products industry
Industry Median: 1.39
vs STU:MBH3: 1.67
Maschinenfabrik Berthold Hermle AG (STU:MBH3) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Maschinenfabrik Berthold Hermle AG Quick Ratio Related Terms
Maschinenfabrik Berthold Hermle AG Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Maschinenfabrik Berthold Hermle AG Quick Ratio Chart
For the Specialty Industrial Machinery subindustry, Maschinenfabrik Berthold Hermle AG's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Maschinenfabrik Berthold Hermle AG Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Maschinenfabrik Berthold Hermle AG's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Maschinenfabrik Berthold Hermle AG's Quick Ratio falls into.
Maschinenfabrik Berthold Hermle AG Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Maschinenfabrik Berthold Hermle AG (STU:MBH3) has a Quick Ratio of 1.67 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Maschinenfabrik Berthold Hermle AG and its competitors. This is 19% below median its historical median of 2.06. Over the past decade, Maschinenfabrik Berthold Hermle AG's Quick Ratio has ranged from 1.67 to 2.62. According to the industry distribution chart, Maschinenfabrik Berthold Hermle AG ranks #1201 out of 3071 companies in the Industrial Products industry, placing it in the top 39.1%.
Is Maschinenfabrik Berthold Hermle AG's Quick Ratio too high?
Maschinenfabrik Berthold Hermle AG's current Quick Ratio of 1.67 is 19% below median its 10-year median of 2.06. Over the past 10 years, this metric has ranged from a low of 1.67 to a high of 2.62. The Industrial Products industry median Quick Ratio is 1.39. Maschinenfabrik Berthold Hermle AG's value of 1.67 is 20.1% above this industry median. Based on the distribution chart, Maschinenfabrik Berthold Hermle AG ranks #1201 out of 3071 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Maschinenfabrik Berthold Hermle AG has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Maschinenfabrik Berthold Hermle AG's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Maschinenfabrik Berthold Hermle AG ranks #1201 out of 3071 companies for Quick Ratio. This puts Maschinenfabrik Berthold Hermle AG in the upper half of its industry. The industry median Quick Ratio is 1.39. Maschinenfabrik Berthold Hermle AG's value of 1.67 is 20.1% above this benchmark. Historically, Maschinenfabrik Berthold Hermle AG's own Quick Ratio has ranged from 1.67 to 2.62 over the past decade. While the company's 10-year median is 2.06 vs. the industry median of 1.39, Maschinenfabrik Berthold Hermle AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,071 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Maschinenfabrik Berthold Hermle AG's current Quick Ratio of 1.67 is 20.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Maschinenfabrik Berthold Hermle AG and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Maschinenfabrik Berthold Hermle AG's current Quick Ratio is 1.67, which is 19% below median its own 10-year median of 2.06. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Maschinenfabrik Berthold Hermle AG stock overvalued right now?
Based on GuruFocus' analysis, Maschinenfabrik Berthold Hermle AG (STU:MBH3) is currently considered Fairly Valued. The stock's GF Value™ is €196.95, compared to a current price of €178.50 — trading 9.4% below its estimated fair value. The current Quick Ratio is 1.67, which is 19% below median its 10-year median of 2.06 and 20.1% above the Industrial Products industry median of 1.39. Maschinenfabrik Berthold Hermle AG's overall GF Score™ is 79/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Maschinenfabrik Berthold Hermle AG (STU:MBH3), the current Quick Ratio is 1.67 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Maschinenfabrik Berthold Hermle AG (STU:MBH3) Overvalued in 2026?
Based on GuruFocus' analysis, Maschinenfabrik Berthold Hermle AG stock appears to be undervalued.
The current stock price of €178.50 is trading 9.4% below its estimated GF Value™ of €196.95.
GuruFocus considers Maschinenfabrik Berthold Hermle AG to be Fairly Valued.
Key valuation signals for STU:MBH3:
Quick Ratio: 1.67 (19% below median its 10-year median of 2.06)
GF Value™: €196.95 vs. price of €178.50 (9.4% below fair value)
Industry Position: 20.1% above the Industrial Products median (#1201 of 3071)
No single metric tells the full story. See the STU:MBH3 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Maschinenfabrik Berthold Hermle AG Business Description
Maschinenfabrik Berthold Hermle AG is a Germany-based company that produces universal milling machines and machining centers, offering its customers complete automation solutions under one roof. The company's customers include domestic and international companies in various high-tech sectors, encompassing mechanical and plant engineering with applications for packing technology, mining or the special vehicles segment, the aerospace industry, medical technology, the electronics and chip industry, the optical industry, energy technology, toolmaking and mould construction as well as the automotive industry, including their subcontractors. The group's operating segments include Domestic companies, which derive maximum revenue, and Foreign sales companies.
79GF Score
Get the complete analysis for STU:MBH3
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:MBH3 has been successfully added to your 
