Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Machino PlasticsBOM:523248 +2.56%70 Return-on-Tangible-Equity is 0.73% as of Mar. 2026, which is 68% below its 10-year median of 2.26. GuruFocus rates BOM:523248 with a GF Score™ of 70/100 and a GF Value™ of ₹344.40 (Modestly Undervalued). The stock has 6 warning signs investors should review. Among 1,282 Vehicles & Parts companies, Machino Plastics ranks worse than 75.2% on this metric.
Return-on-Tangible-Equity is calculated as Net Income divided by its average total shareholder tangible equity. Total shareholder tangible equity equals to Total Stockholders Equity minus Intangible Assets. Machino Plastics's annualized net income for the quarter that ended in Mar. 2026 was ₹10 Mil. Machino Plastics's average shareholder tangible equity for the quarter that ended in Mar. 2026 was ₹1,367 Mil. Therefore, Machino Plastics's annualized Return-on-Tangible-Equity for the quarter that ended in Mar. 2026 was 0.73%.
The historical rank and industry rank for Machino Plastics's Return-on-Tangible-Equity or its related term are showing as below:
BOM:523248'
s Return-on-Tangible-Equity Range Over the Past 10 Years
Min: -7.82 Med: 2.26 Max: 14.53
Current: 1.49
During the past 13 years, Machino Plastics's highest Return-on-Tangible-Equity was 14.53%. The lowest was -7.82%. And the median was 2.26%.
BOM:523248's Return-on-Tangible-Equity is ranked worse than 75.2% of 1282
companies
in the Vehicles & Parts industry
Industry Median: 7.59
vs BOM:523248: 1.49
Return-on-Tangible-Equity measures the rate of return on the ownership interest (shareholder's tangible equity) of the common stock owners. It measures a firm's efficiency at generating profits from every unit of shareholders' tangible equity (shareholders equity minus intangibles). Return-on-Tangible-Equity shows how well a company uses investment funds to generate earnings growth. Return-on-Tangible-Equitys between 15% and 20% are considered desirable.
Be Aware
Net Income is used.
Because a company can increase its Return-on-Tangible-Equity by having more financial leverage, it is important to watch the leverage ratio when investing in high Return-on-Tangible-Equity companies. Like Return-on-Tangible-Asset, Return-on-Tangible-Equity is calculated with only 12 months data. Fluctuations in company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective.
Asset light businesses require very few assets to generate very high earnings. Their Return-on-Tangible-Equitys can be extremely high.
Machino Plastics Return-on-Tangible-Equity Related Terms
Machino Plastics Return-on-Tangible-Equity Historical Data
* Premium members only.
The historical data trend for Machino Plastics's Return-on-Tangible-Equity can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:523248 vs ORLY, AZO: Return-on-Tangible-Equity Comparison
For the Auto Parts subindustry, Machino Plastics's Return-on-Tangible-Equity, along with its competitors' market caps and Return-on-Tangible-Equity data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Machino Plastics Return-on-Tangible-Equity vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Machino Plastics's Return-on-Tangible-Equity distribution charts can be found below:
* The bar in red indicates where Machino Plastics's Return-on-Tangible-Equity falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual Return-on-Tangible-Equity, the net income of the last fiscal year and the average total shareholder tangible equity over the fiscal year are used. In calculating the quarterly data,
the net income data used here is four times the quarterly (Mar. 2026) net income data.
Return-on-Tangible-Equity is displayed in the 10-year financial page.
What does a Return-on-Tangible-Equity of 0.73% mean?
Machino Plastics (BOM:523248) has a Return-on-Tangible-Equity of 0.73% as of Mar. 2026. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on Machino Plastics and its competitors. This is 68% below median its historical median of 2.26. According to the industry distribution chart, Machino Plastics ranks #964 out of 1282 companies in the Vehicles & Parts industry, placing it in the top 75.2%.
Is Machino Plastics' Return-on-Tangible-Equity too high?
Machino Plastics' current Return-on-Tangible-Equity of 0.73% is 68% below median its 10-year median of 2.26. The Vehicles & Parts industry median Return-on-Tangible-Equity is 7.59. Machino Plastics' value of 0.73% is 90.4% below this industry median. Based on the distribution chart, Machino Plastics ranks #964 out of 1282 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Machino Plastics has a GF Score™ of 70/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Machino Plastics' Return-on-Tangible-Equity compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Machino Plastics ranks #964 out of 1282 companies for Return-on-Tangible-Equity. This places Machino Plastics in the lower half of its industry. The industry median Return-on-Tangible-Equity is 7.59. Machino Plastics' value of 0.73% is 90.4% below this benchmark. While the company's 10-year median is 2.26 vs. the industry median of 7.59, Machino Plastics has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Return-on-Tangible-Equity for a Vehicles & Parts company?
The median Return-on-Tangible-Equity among Vehicles & Parts companies is 7.59, based on 1,282 companies in the industry. Companies in the top quartile (top 25%) have a Return-on-Tangible-Equity significantly above this median, while those in the bottom quartile fall well below. However, Return-on-Tangible-Equity should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Machino Plastics's current Return-on-Tangible-Equity of 0.73% is 90.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Return-on-Tangible-Equity mean?
A high Return-on-Tangible-Equity can signal that a stock is expensive relative to its fundamentals. Return on tangible equity is the ratio of current-period net income to average two-period tangible equity. View historical data on Machino Plastics and its competitors. For the Vehicles & Parts industry, the median Return-on-Tangible-Equity is 7.59 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Machino Plastics's current Return-on-Tangible-Equity is 0.73%, which is 68% below median its own 10-year median of 2.26. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Machino Plastics stock overvalued right now?
Based on GuruFocus' analysis, Machino Plastics (BOM:523248) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹344.40, compared to a current price of ₹270.00 — trading 21.6% below its estimated fair value. The current Return-on-Tangible-Equity is 0.73%, which is 68% below median its 10-year median of 2.26 and 90.4% below the Vehicles & Parts industry median of 7.59. Machino Plastics' overall GF Score™ is 70/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Return-on-Tangible-Equity calculated?
Return-on-Tangible-Equity is calculated from a company's financial statements. For Machino Plastics (BOM:523248), the current Return-on-Tangible-Equity is 0.73% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Machino Plastics (BOM:523248) Overvalued in 2026?
Based on GuruFocus' analysis, Machino Plastics stock appears to be undervalued.
The current stock price of ₹270.00 is trading 21.6% below its estimated GF Value™ of ₹344.40.
GuruFocus considers Machino Plastics to be Modestly Undervalued.
Key valuation signals for BOM:523248:
Return-on-Tangible-Equity: 0.73% (68% below median its 10-year median of 2.26)
GF Value™: ₹344.40 vs. price of ₹270.00 (21.6% below fair value)
Industry Position: 90.4% below the Vehicles & Parts median (#964 of 1282)
No single metric tells the full story. See the BOM:523248 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Machino Plastics Ltd is an automotive component manufacturing company. It is engaged in the manufacture of plastic injection moulded automotive components and moulds/dies, and is trying to diversify its product range and of industry it caters to. Products are bumpers, dashboards, instrument panels, grills, and others, as original equipment and for the spare parts market. The company operates in the segment of Automotive injection molding plastic components. It derives principal revenue from the sale of products manufactured by it.
70GF Score
Get the complete analysis for BOM:523248
Return-on-Tangible-Equity is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:523248 has been successfully added to your 
