Rimfire Pacific Mining (ASX:RIM) ROA %: -13.48% (As of Dec. 2025)


What is Rimfire Pacific Mining ROA %?

Rimfire Pacific Mining ASX:RIM ROA % is -13.48% as of Dec. 2025. The stock has 1 warning sign investors should review. Among 2,665 Metals & Mining companies, Rimfire Pacific Mining ranks worse than 58.09% on this metric.

ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Rimfire Pacific Mining's annualized Net Income for the quarter that ended in Dec. 2025 was A$-2.77 Mil. Rimfire Pacific Mining's average Total Assets over the quarter that ended in Dec. 2025 was A$20.53 Mil. Therefore, Rimfire Pacific Mining's annualized ROA % for the quarter that ended in Dec. 2025 was -13.48%.

The historical rank and industry rank for Rimfire Pacific Mining's ROA % or its related term are showing as below:

ASX:RIM' s ROA % Range Over the Past 10 Years
Min: -27.72   Med: -6.39   Max: -2.28
Current: -25.27

During the past 13 years, Rimfire Pacific Mining's highest ROA % was -2.28%. The lowest was -27.72%. And the median was -6.39%.

ASX:RIM's ROA % is ranked worse than
58.09% of 2665 companies
in the Metals & Mining industry
Industry Median: -16.72 vs ASX:RIM: -25.27

Rimfire Pacific Mining  (ASX:RIM) ROA % Explanation

ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A bank’s ROA % is typically well under 2%.

Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:

ROA %(Q: Dec. 2025 )
=Net Income/Total Assets
=-2.768/20.534
=(Net Income / Revenue)*(Revenue / Total Assets)
=(-2.768 / 0)*(0 / 20.534)
=Net Margin %*Asset Turnover
=N/A %*0
=-13.48 %

Note: The Net Income data used here is two times the semi-annual (Dec. 2025) net income data. The Revenue data used here is two times the semi-annual (Dec. 2025) revenue data.

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.


Be Aware

Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).

Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.

E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.


Rimfire Pacific Mining ROA % Related Terms


Rimfire Pacific Mining ROA % Historical Data

* Premium members only.

The historical data trend for Rimfire Pacific Mining's ROA % can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

Rimfire Pacific Mining ROA % Chart

Rimfire Pacific Mining Annual Data
Trend Jun16 Jun17 Jun18 Jun19 Jun20 Jun21 Jun22 Jun23 Jun24 Jun25
ROA %
Get a 7-Day Free Trial Premium Member Only Premium Member Only -2.28 -5.43 -4.88 -8.37 -27.72

Rimfire Pacific Mining Semi-Annual Data
Jun16 Dec16 Jun17 Dec17 Jun18 Dec18 Jun19 Dec19 Jun20 Dec20 Jun21 Dec21 Jun22 Dec22 Jun23 Dec23 Jun24 Dec24 Jun25 Dec25
ROA % Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only -7.86 -8.59 -17.30 -37.59 -13.48

ASX:RIM vs HL: ROA % Comparison

For the Other Precious Metals & Mining subindustry, Rimfire Pacific Mining's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Rimfire Pacific Mining ROA % vs Metals & Mining Industry

For the Metals & Mining industry and Basic Materials sector, Rimfire Pacific Mining's ROA % distribution charts can be found below:

* The bar in red indicates where Rimfire Pacific Mining's ROA % falls into.



Rimfire Pacific Mining ROA % Calculation

Rimfire Pacific Mining's annualized ROA % for the fiscal year that ended in Jun. 2025 is calculated as:

ROA %=Net Income (A: Jun. 2025 )/( (Total Assets (A: Jun. 2024 )+Total Assets (A: Jun. 2025 ))/ count )
=-5.249/( (17.753+20.124)/ 2 )
=-5.249/18.9385
=-27.72 %

Rimfire Pacific Mining's annualized ROA % for the quarter that ended in Dec. 2025 is calculated as:

ROA %=Net Income (Q: Dec. 2025 )/( (Total Assets (Q: Jun. 2025 )+Total Assets (Q: Dec. 2025 ))/ count )
=-2.768/( (20.124+20.944)/ 2 )
=-2.768/20.534
=-13.48 %

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data, the Net Income data used here is two times the semi-annual (Dec. 2025) net income data. ROA % is displayed in the 30-year financial page.

Frequently Asked Questions Learn more about ROA % →
What does a ROA % of -13.48% mean?
Rimfire Pacific Mining (ASX:RIM) has a ROA % of -13.48% as of Dec. 2025. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Rimfire Pacific Mining and its competitors. According to the industry distribution chart, Rimfire Pacific Mining ranks #1548 out of 2665 companies in the Metals & Mining industry, placing it in the top 58.1%.
Is Rimfire Pacific Mining's ROA % too high?
Rimfire Pacific Mining's current ROA % is -13.48%. Based on the distribution chart, Rimfire Pacific Mining ranks #1548 out of 2665 companies in the Metals & Mining industry, which is below the industry midpoint.
How does Rimfire Pacific Mining's ROA % compare to HL?
According to the Metals & Mining industry distribution chart, Rimfire Pacific Mining ranks #1548 out of 2665 companies for ROA %. This places Rimfire Pacific Mining in the lower half of its industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Metals & Mining company?
A good ROA % depends on the Metals & Mining industry context. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Rimfire Pacific Mining and its competitors. Rimfire Pacific Mining's current ROA % is -13.48%. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rimfire Pacific Mining stock overvalued right now?
Rimfire Pacific Mining (ASX:RIM) has a current ROA % of -13.48%. The current ROA % is -13.48%. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Rimfire Pacific Mining (ASX:RIM), the current ROA % is -13.48% as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Rimfire Pacific Mining Business Description

Address 385 Bourke Street, Suite 2, Level 11, Melbourne, VIC, AUS, 3000
Rimfire Pacific Mining Ltd is engaged in the exploration and evaluation of mineral deposits. The exploration project is located in the Lachlan Transverse Zone. Geographically, it operates only in Australia. It holds interest in four projects in the Lachlan Fold Belt namely Valley Project; Cowal Project; Fifield Project and Avondale Project. It also holds one project namely Green View Project in the Willyama Supergroup in New South Wales.