Conart EngineersBOM:522231 -1.54%82 ROA % is 10.20% as of Mar. 2026, which is 48% above its 10-year median of 6.88. GuruFocus rates BOM:522231 with a GF Score™ of 82/100 and a GF Value™ of ₹90.10 (Fairly Valued). The stock has 2 warning signs investors should review. Among 1,777 Construction companies, Conart Engineers ranks better than 83.79% on this metric.
ROA % is calculated as Net Income divided by its average Total Assets over a certain period of time. Conart Engineers's annualizedNet Income for the quarter that ended in Mar. 2026 was ₹44.3 Mil.
Conart Engineers's average Total Assets over the quarter that ended in Mar. 2026 was ₹434.6 Mil. Therefore, Conart Engineers's annualized ROA % for the quarter that ended in Mar. 2026 was 10.20%.
The historical rank and industry rank for Conart Engineers's ROA % or its related term are showing as below:
BOM:522231'
s ROA % Range Over the Past 10 Years
Min: 4.09 Med: 6.88 Max: 9.74
Current: 8.52
During the past 13 years, Conart Engineers's highest ROA % was 9.74%. The lowest was 4.09%. And the median was 6.88%.
BOM:522231's ROA % is ranked better than 83.79% of 1777
companies
in the Construction industry
Industry Median: 2.79
vs BOM:522231: 8.52
Conart Engineers (BOM:522231) ROA % Explanation
ROA % measures the rate of return on the total assets (shareholder equity plus liabilities). It measures a firm's efficiency at generating profits from shareholders' equity plus its liabilities. ROA % shows how well a company uses what it has to generate earnings. ROA %s can vary drastically across industries. Therefore, ROA % should not be used to compare companies in different industries. For retailers, a ROA % of higher than 5% is expected. For example, Wal-Mart (WMT) has a ROA % of about 8% as of 2012. For banks, ROA % is close to their interest spread. A banks ROA % is typically well under 2%.
Similar to ROE, ROA % is affected by profit margins and asset turnover. This can be seen from the Du Pont Formula:
Note:
The Net Income data used here is four times the quarterly (Mar. 2026) net income data. The Revenue data used here is four times the quarterly (Mar. 2026) revenue data.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Like ROE, ROA % is calculated with only 12 months data. Fluctuations in the company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective. ROA % can be affected by events such as stock buyback or issuance, and by goodwill, a company's tax rate and its interest payment. ROA % may not reflect the true earning power of the assets. A more accurate measurement is ROC % (ROC).
Many analysts argue the higher return the better. Buffett states that really high ROA % may indicate vulnerability in the durability of the competitive advantage.
E.g. Raising $43b to take on KO is impossible, but $1.7b to take on Moody's is. Although Moody's ROA % and underlying economics is far superior to Coca Cola, the durability is far weaker because of lower entry cost.
Conart Engineers ROA % Related Terms
Conart Engineers ROA % Historical Data
* Premium members only.
The historical data trend for Conart Engineers's ROA % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Engineering & Construction subindustry, Conart Engineers's ROA %, along with its competitors' market caps and ROA % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Conart Engineers ROA % vs Construction Industry
For the Construction industry and Industrials sector, Conart Engineers's ROA % distribution charts can be found below:
* The bar in red indicates where Conart Engineers's ROA % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROA %, the net income of the last fiscal year and the average total assets over the fiscal year are used. In calculating the quarterly data,
the Net Income data used here is four times the quarterly (Mar. 2026) net income data.
ROA % is displayed in the 30-year financial page.
Conart Engineers (BOM:522231) has a ROA % of 10.20% as of Mar. 2026. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Conart Engineers and its competitors. This is 48% above median its historical median of 6.88. Over the past decade, Conart Engineers' ROA % has ranged from 4.09 to 9.74. According to the industry distribution chart, Conart Engineers ranks #288 out of 1777 companies in the Construction industry, placing it in the top 16.2%.
Is Conart Engineers' ROA % too high?
Conart Engineers' current ROA % of 10.20% is 48% above median its 10-year median of 6.88. Over the past 10 years, this metric has ranged from a low of 4.09 to a high of 9.74. The Construction industry median ROA % is 2.79. Conart Engineers' value of 10.20% is 265.6% above this industry median. Based on the distribution chart, Conart Engineers ranks #288 out of 1777 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Conart Engineers has a GF Score™ of 82/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Conart Engineers' ROA % compare to PWR and FIX?
According to the Construction industry distribution chart, Conart Engineers ranks #288 out of 1777 companies for ROA %. This places Conart Engineers in the top 16% of its industry — outperforming the majority of peers. The industry median ROA % is 2.79. Conart Engineers' value of 10.20% is 265.6% above this benchmark. Historically, Conart Engineers' own ROA % has ranged from 4.09 to 9.74 over the past decade. While the company's 10-year median is 6.88 vs. the industry median of 2.79, Conart Engineers has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROA % for a Construction company?
The median ROA % among Construction companies is 2.79, based on 1,777 companies in the industry. Companies in the top quartile (top 25%) have a ROA % significantly above this median, while those in the bottom quartile fall well below. However, ROA % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Conart Engineers's current ROA % of 10.20% is 265.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROA % mean?
A high ROA % can signal that a stock is expensive relative to its fundamentals. Return on assets is the ratio of current-period net income to average two-period total assets. View historical data on Conart Engineers and its competitors. For the Construction industry, the median ROA % is 2.79 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Conart Engineers's current ROA % is 10.20%, which is 48% above median its own 10-year median of 6.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Conart Engineers stock overvalued right now?
Based on GuruFocus' analysis, Conart Engineers (BOM:522231) is currently considered Fairly Valued. The stock's GF Value™ is ₹90.10, compared to a current price of ₹92.85 — trading 3.1% above its estimated fair value. The current ROA % is 10.20%, which is 48% above median its 10-year median of 6.88 and 265.6% above the Construction industry median of 2.79. Conart Engineers' overall GF Score™ is 82/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROA % calculated?
ROA % is calculated from a company's financial statements. For Conart Engineers (BOM:522231), the current ROA % is 10.20% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Conart Engineers (BOM:522231) Overvalued in 2026?
Based on GuruFocus' analysis, Conart Engineers stock appears to be overvalued.
The current stock price of ₹92.85 is trading 3.1% above its estimated GF Value™ of ₹90.10.
GuruFocus considers Conart Engineers to be Fairly Valued.
Key valuation signals for BOM:522231:
ROA %: 10.20% (48% above median its 10-year median of 6.88)
GF Value™: ₹90.10 vs. price of ₹92.85 (3.1% above fair value)
Industry Position: 265.6% above the Construction median (#288 of 1777)
No single metric tells the full story. See the BOM:522231 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Conart Engineers Ltd is a building and civil construction firm in India. It is engaged in providing general contracting and project management services for industrial, commercial, and residential construction projects. It provides services to sectors like Heavy Machinery, Pharmaceuticals, Chemicals, Textiles, and Education. Services such as General Contracting, Design Built, and Turnkey Services include cost monitoring and control, schedule development and control, safety assurance, project accounting, change management, quality control, field engineering and site management, and subcontractor management.
82GF Score
Get the complete analysis for BOM:522231
ROA % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:522231 has been successfully added to your 
