ScanfilSTU:S0A +2.42%67 ROE % is 12.23% as of Mar. 2026, which is 28% below its 10-year median of 17.10. GuruFocus rates STU:S0A with a GF Score™ of 67/100 and a GF Value™ of €9.44 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 3,003 Industrial Products companies, Scanfil ranks better than 80.09% on this metric.
ROE % is calculated as Net Income divided by its average Total Stockholders Equity over a certain period of time. Scanfil's annualized net income for the quarter that ended in Mar. 2026 was €39.2 Mil. Scanfil's average Total Stockholders Equity over the quarter that ended in Mar. 2026 was €320.5 Mil. Therefore, Scanfil's annualized ROE % for the quarter that ended in Mar. 2026 was 12.23%.
The historical rank and industry rank for Scanfil's ROE % or its related term are showing as below:
STU:S0A'
s ROE % Range Over the Past 10 Years
Min: 0.09 Med: 17.1 Max: 22.15
Current: 13.84
During the past 13 years, Scanfil's highest ROE % was 22.15%. The lowest was 0.09%. And the median was 17.10%.
STU:S0A's ROE % is ranked better than 80.09% of 3003
companies
in the Industrial Products industry
Industry Median: 5.85
vs STU:S0A: 13.84
Scanfil (STU:S0A) ROE % Explanation
ROE % measures the rate of return on the ownership interest (shareholder's equity) of the common stock owners. It measures a firm's efficiency at generating profits from every unit of shareholders' equity (also known as net assets or assets minus liabilities). ROE % shows how well a company uses investment funds to generate earnings growth. ROE %s between 15% and 20% are considered desirable.
The factors that affect a company's ROE % can be illustrated with the three-step DuPont Analysis:
Note:
The net income data used here is four times the quarterly (Mar. 2026) net income data. The Revenue data used here is four times the quarterly (Mar. 2026) revenue data. The same rule applies to Pre-Tax Income and Operating Income.
* In the five-step DuPont Analysis, Operating Income is only available for non-financial companies. Thus, for Insurance companies, we use EBIT as a substitution of Operating Income. For Banks, both Operating Income and EBIT is unavailable. Thus we combined Interest Burden and Operating Margin % into Pretax Margin %, and the DuPont Analysis is divided into four components instead.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Be Aware
Net Income is used.
Because a company can increase its ROE % by having more financial leverage, it is important to watch the equity multiplier when investing in high ROE % companies. Like ROA %, ROE % is calculated with only 12 months data. Fluctuations in company's earnings or business cycles can affect the ratio drastically. It is important to look at the ratio from a long term perspective.
Asset light businesses require very few assets to generate very high earnings. Their ROE %s can be extremely high.
Scanfil ROE % Related Terms
Scanfil ROE % Historical Data
* Premium members only.
The historical data trend for Scanfil's ROE % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Scanfil's ROE %, along with its competitors' market caps and ROE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Scanfil ROE % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Scanfil's ROE % distribution charts can be found below:
* The bar in red indicates where Scanfil's ROE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of annual ROE %, the net income of the last fiscal year and the average total shareholder equity over the fiscal year are used. In calculating the quarterly data,
the net income data used here is four times the quarterly (Mar. 2026) net income data.
ROE % is displayed in the 30-year financial page.
Scanfil (STU:S0A) has a ROE % of 12.23% as of Mar. 2026. Return on equity is the ratio of current-period net income to average two-period total equity. View historical data on Scanfil and its competitors. This is 28% below median its historical median of 17.10. Over the past decade, Scanfil's ROE % has ranged from 0.09 to 22.15. According to the industry distribution chart, Scanfil ranks #598 out of 3003 companies in the Industrial Products industry, placing it in the top 19.9%.
Is Scanfil's ROE % too high?
Scanfil's current ROE % of 12.23% is 28% below median its 10-year median of 17.10. Over the past 10 years, this metric has ranged from a low of 0.09 to a high of 22.15. The Industrial Products industry median ROE % is 5.85. Scanfil's value of 12.23% is 109.1% above this industry median. Based on the distribution chart, Scanfil ranks #598 out of 3003 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Scanfil has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Scanfil's ROE % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Scanfil ranks #598 out of 3003 companies for ROE %. This places Scanfil in the top 20% of its industry — outperforming the majority of peers. The industry median ROE % is 5.85. Scanfil's value of 12.23% is 109.1% above this benchmark. Historically, Scanfil's own ROE % has ranged from 0.09 to 22.15 over the past decade. While the company's 10-year median is 17.10 vs. the industry median of 5.85, Scanfil has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good ROE % for an Industrial Products company?
The median ROE % among Industrial Products companies is 5.85, based on 3,003 companies in the industry. Companies in the top quartile (top 25%) have a ROE % significantly above this median, while those in the bottom quartile fall well below. However, ROE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Scanfil's current ROE % of 12.23% is 109.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high ROE % mean?
A high ROE % can signal that a stock is expensive relative to its fundamentals. Return on equity is the ratio of current-period net income to average two-period total equity. View historical data on Scanfil and its competitors. For the Industrial Products industry, the median ROE % is 5.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Scanfil's current ROE % is 12.23%, which is 28% below median its own 10-year median of 17.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Scanfil stock overvalued right now?
Based on GuruFocus' analysis, Scanfil (STU:S0A) is currently considered Significantly Overvalued. The stock's GF Value™ is €9.44, compared to a current price of €12.72 — trading 34.7% above its estimated fair value. The current ROE % is 12.23%, which is 28% below median its 10-year median of 17.10 and 109.1% above the Industrial Products industry median of 5.85. Scanfil's overall GF Score™ is 67/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is ROE % calculated?
ROE % is calculated from a company's financial statements. For Scanfil (STU:S0A), the current ROE % is 12.23% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Scanfil (STU:S0A) Overvalued in 2026?
Based on GuruFocus' analysis, Scanfil stock appears to be overvalued.
The current stock price of €12.72 is trading 34.7% above its estimated GF Value™ of €9.44.
GuruFocus considers Scanfil to be Significantly Overvalued.
Key valuation signals for STU:S0A:
ROE %: 12.23% (28% below median its 10-year median of 17.10)
GF Value™: €9.44 vs. price of €12.72 (34.7% above fair value)
Industry Position: 109.1% above the Industrial Products median (#598 of 3003)
No single metric tells the full story. See the STU:S0A stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Scanfil PLC is an international contract manufacturer and system supplier for the electronics industry, providing services ranging from product design to manufacturing, material procurement, and logistics solutions. The Company's services include design services, prototype manufacturing, design for manufacturability (DFM), test development, supply chain and logistics services, circuit board assembly, manufacturing of subsystems and components, and complex systems integration. It serves the sector across Aerospace & Defense, Energy & Cleantech, Industrial, and Medtech & Life Science. The Company operates in the Americas, APAC, Central Europe, and Northern Europe, with Central Europe generating the majority of revenue.
67GF Score
Get the complete analysis for STU:S0A
ROE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:S0A has been successfully added to your 
