Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Return on Retained Earnings (RORE) is an indicator of a company's growth potential, it shows how much a company earns by reinvesting its retained earnings, i.e. profits after dividend payments.
EDAG Engineering Group AG's 10-Year RORE % for the quarter that ended in Mar. 2026 was 106.06%.
The industry rank for EDAG Engineering Group AG's 10-Year RORE % or its related term are showing as below:
XTER:ED4's 10-Year RORE % is ranked better than 94.77% of 879
companies
in the Vehicles & Parts industry
Industry Median: 5.66
vs XTER:ED4: 106.06
EDAG Engineering Group AG (XTER:ED4) 10-Year RORE % Explanation
Return on Retained Earnings (RORE) is important to investors because it reveals a company's efficiency and growth potential. A higher RORE indicates a higher return. A high RORE indicates that the company should reinvest profits into the business. A lower RORE suggests that the company should distribute profits to shareholders by paying out dividends, since those dollars aren't generating much additional growth for the company.
There are a several different ways to arrive at the Return on Retained Earnings. The simplest way to calculate it is by using published information on Earnings per Share (EPS) and Dividend per Share (DPS) over a selected period. Here, 10-year period is chosen.
Be Aware
Please keep in mind that the RORE is relative to the nature of the business and its competitors. If another company in the same sector is producing a lower return on retained earnings, it doesn’t necessarily mean it’s a bad investment. It may just suggest the company is older and no longer in a high growth stage. At such a stage in the business cycle, it would be expected to see a lower RORE and higher dividend payout.
EDAG Engineering Group AG 10-Year RORE % Related Terms
EDAG Engineering Group AG 10-Year RORE % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XTER:ED4 vs ORLY, AZO, GPC: 10-Year RORE % Comparison
For the Auto Parts subindustry, EDAG Engineering Group AG's 10-Year RORE %, along with its competitors' market caps and 10-Year RORE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
EDAG Engineering Group AG 10-Year RORE % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, EDAG Engineering Group AG's 10-Year RORE % distribution charts can be found below:
* The bar in red indicates where EDAG Engineering Group AG's 10-Year RORE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of 10-Year RORE %, the most recent and first period EPS (Diluted) is the trailing twelve months (TTM) data ended in Mar. 2026 and 10-year before.
EDAG Engineering Group AG (XTER:ED4) has a 10-Year RORE % of 106.06 as of Mar. 2026. 10-Year RORE % shows how much a company earns by reinvesting its retained earnings in 10-year. View historical data on EDAG Engineering Group AG and its competitors. According to the industry distribution chart, EDAG Engineering Group AG ranks #46 out of 879 companies in the Vehicles & Parts industry, placing it in the top 5.2%.
Is EDAG Engineering Group AG's 10-Year RORE % too high?
EDAG Engineering Group AG's current 10-Year RORE % is 106.06. The Vehicles & Parts industry median 10-Year RORE % is 5.66. EDAG Engineering Group AG's value of 106.06 is 1773.9% above this industry median. Based on the distribution chart, EDAG Engineering Group AG ranks #46 out of 879 companies in the Vehicles & Parts industry, which is in the top quartile — a strong position relative to peers. Overall, EDAG Engineering Group AG has a GF Score™ of 55/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does EDAG Engineering Group AG's 10-Year RORE % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, EDAG Engineering Group AG ranks #46 out of 879 companies for 10-Year RORE %. This places EDAG Engineering Group AG in the top 5% of its industry — outperforming the majority of peers. The industry median 10-Year RORE % is 5.66. EDAG Engineering Group AG's value of 106.06 is 1773.9% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 10-Year RORE % for a Vehicles & Parts company?
The median 10-Year RORE % among Vehicles & Parts companies is 5.66, based on 879 companies in the industry. Companies in the top quartile (top 25%) have a 10-Year RORE % significantly above this median, while those in the bottom quartile fall well below. However, 10-Year RORE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. EDAG Engineering Group AG's current 10-Year RORE % of 106.06 is 1773.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 10-Year RORE % mean?
A high 10-Year RORE % can signal that a stock is expensive relative to its fundamentals. 10-Year RORE % shows how much a company earns by reinvesting its retained earnings in 10-year. View historical data on EDAG Engineering Group AG and its competitors. For the Vehicles & Parts industry, the median 10-Year RORE % is 5.66 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. EDAG Engineering Group AG's current 10-Year RORE % is 106.06. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is EDAG Engineering Group AG stock overvalued right now?
Based on GuruFocus' analysis, EDAG Engineering Group AG (XTER:ED4) is currently considered Possible Value Trap. The stock's GF Value™ is €6.73, compared to a current price of €3.12 — trading 53.6% below its estimated fair value. The current 10-Year RORE % is 106.06 and 1773.9% above the Vehicles & Parts industry median of 5.66. EDAG Engineering Group AG's overall GF Score™ is 55/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 10-Year RORE % calculated?
10-Year RORE % is calculated from a company's financial statements. For EDAG Engineering Group AG (XTER:ED4), the current 10-Year RORE % is 106.06 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is EDAG Engineering Group AG (XTER:ED4) Overvalued in 2026?
Based on GuruFocus' analysis, EDAG Engineering Group AG stock appears to be undervalued.
The current stock price of €3.12 is trading 53.6% below its estimated GF Value™ of €6.73.
GuruFocus considers EDAG Engineering Group AG to be Possible Value Trap.
Key valuation signals for XTER:ED4:
10-Year RORE %: 106.06
GF Value™: €6.73 vs. price of €3.12 (53.6% below fair value)
Industry Position: 1773.9% above the Vehicles & Parts median (#46 of 879)
No single metric tells the full story. See the XTER:ED4 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
EDAG Engineering Group AG is an independent engineering service provider and handles projects in the fields of mobility solutions, industry solutions, and public solutions in the Vehicle Engineering, Electrics/Electronics and Production Solutions segments. The Vehicle Engineering segment consists of service along the vehicle development process as well as responsibility for derivate and complete vehicles. The Electrics/Electronics segment includes the development of electrical and electronic systems, components, functions and services for everything from show cars and prototypes to the complete vehicle. The Production Solutions segment is responsible for the development and implementation of production processes. The Vehicle Engineering segment derives the majority of revenue.
55GF Score
Get the complete analysis for XTER:ED4
10-Year RORE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XTER:ED4 has been successfully added to your 
