HurcoFRA:HC2 -0.51%62 3-Year RORE % is 23.00 as of Apr. 2026. GuruFocus rates FRA:HC2 with a GF Score™ of 62/100 and a GF Value™ of €13.59 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 2,894 Industrial Products companies, Hurco ranks better than 70.35% on this metric.
Return on Retained Earnings (RORE) is an indicator of a company's growth potential, it shows how much a company earns by reinvesting its retained earnings, i.e. profits after dividend payments.
Hurco's 3-Year RORE % for the quarter that ended in Apr. 2026 was 23.00%.
The industry rank for Hurco's 3-Year RORE % or its related term are showing as below:
FRA:HC2's 3-Year RORE % is ranked better than 70.35% of 2894
companies
in the Industrial Products industry
Industry Median: 5.23
vs FRA:HC2: 23.00
Hurco (FRA:HC2) 3-Year RORE % Explanation
Return on Retained Earnings (RORE) is important to investors because it reveals a company's efficiency and growth potential. A higher RORE indicates a higher return. A high RORE indicates that the company should reinvest profits into the business. A lower RORE suggests that the company should distribute profits to shareholders by paying out dividends, since those dollars aren't generating much additional growth for the company.
There are a several different ways to arrive at the Return on Retained Earnings. The simplest way to calculate it is by using published information on Earnings per Share (EPS) and Dividend per Share (DPS) over a selected period. Here, 3-year period is chosen.
Be Aware
Please keep in mind that the RORE is relative to the nature of the business and its competitors. If another company in the same sector is producing a lower return on retained earnings, it doesn’t necessarily mean it’s a bad investment. It may just suggest the company is older and no longer in a high growth stage. At such a stage in the business cycle, it would be expected to see a lower RORE and higher dividend payout.
Hurco 3-Year RORE % Related Terms
Hurco 3-Year RORE % Historical Data
* Premium members only.
The historical data trend for Hurco's 3-Year RORE % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FRA:HC2 vs NPWR, HDRN, ZJK: 3-Year RORE % Comparison
For the Specialty Industrial Machinery subindustry, Hurco's 3-Year RORE %, along with its competitors' market caps and 3-Year RORE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Hurco 3-Year RORE % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Hurco's 3-Year RORE % distribution charts can be found below:
* The bar in red indicates where Hurco's 3-Year RORE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of 3-Year RORE %, the most recent and first period EPS (Diluted) is the trailing twelve months (TTM) data ended in Apr. 2026 and 3-year before.
Hurco (FRA:HC2) has a 3-Year RORE % of 23.00 as of Apr. 2026. 3-Year RORE % shows how much a company earns by reinvesting its retained earnings in 3-year. View historical data on Hurco and its competitors. According to the industry distribution chart, Hurco ranks #858 out of 2894 companies in the Industrial Products industry, placing it in the top 29.6%.
Is Hurco's 3-Year RORE % too high?
Hurco's current 3-Year RORE % is 23.00. The Industrial Products industry median 3-Year RORE % is 5.23. Hurco's value of 23.00 is 339.8% above this industry median. Based on the distribution chart, Hurco ranks #858 out of 2894 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Hurco has a GF Score™ of 62/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Hurco's 3-Year RORE % compare to NPWR and HDRN?
According to the Industrial Products industry distribution chart, Hurco ranks #858 out of 2894 companies for 3-Year RORE %. This puts Hurco in the upper half of its industry. The industry median 3-Year RORE % is 5.23. Hurco's value of 23.00 is 339.8% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 3-Year RORE % for an Industrial Products company?
The median 3-Year RORE % among Industrial Products companies is 5.23, based on 2,894 companies in the industry. Companies in the top quartile (top 25%) have a 3-Year RORE % significantly above this median, while those in the bottom quartile fall well below. However, 3-Year RORE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Hurco's current 3-Year RORE % of 23.00 is 339.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 3-Year RORE % mean?
A high 3-Year RORE % can signal that a stock is expensive relative to its fundamentals. 3-Year RORE % shows how much a company earns by reinvesting its retained earnings in 3-year. View historical data on Hurco and its competitors. For the Industrial Products industry, the median 3-Year RORE % is 5.23 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Hurco's current 3-Year RORE % is 23.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Hurco stock overvalued right now?
Based on GuruFocus' analysis, Hurco (FRA:HC2) is currently considered Significantly Overvalued. The stock's GF Value™ is €13.59, compared to a current price of €19.50 — trading 43.5% above its estimated fair value. The current 3-Year RORE % is 23.00 and 339.8% above the Industrial Products industry median of 5.23. Hurco's overall GF Score™ is 62/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 3-Year RORE % calculated?
3-Year RORE % is calculated from a company's financial statements. For Hurco (FRA:HC2), the current 3-Year RORE % is 23.00 as of Apr. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Hurco (FRA:HC2) Overvalued in 2026?
Based on GuruFocus' analysis, Hurco stock appears to be overvalued.
The current stock price of €19.50 is trading 43.5% above its estimated GF Value™ of €13.59.
GuruFocus considers Hurco to be Significantly Overvalued.
Key valuation signals for FRA:HC2:
3-Year RORE %: 23.00
GF Value™: €13.59 vs. price of €19.50 (43.5% above fair value)
Industry Position: 339.8% above the Industrial Products median (#858 of 2894)
No single metric tells the full story. See the FRA:HC2 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Hurco Companies Inc is an international industrial technology company that designs, manufactures, and sells computerized (CNC) machine tools for the metal cutting industry through a international sales and distribution network. Its proprietary control systems and software are sold as integral components of its machine tools. The Company also provides machine tool components, automation solutions, software options, upgrades, accessories, replacement parts, and related support services. It operates in the Americas, Europe, and Asia Pacific, with the Americas contributing the majority of revenue. Its core products include vertical and horizontal machining centers (mills), turning centers (lathes), and toolroom machines.
62GF Score
Get the complete analysis for FRA:HC2
3-Year RORE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:HC2 has been successfully added to your 
