Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
USDMY'
s Shiller PE Ratio Range Over the Past 10 Years
Min: 5.59 Med: 12.88 Max: 274.33
Current: 6.57
During the past years, Usinas Siderurgicas de Minas Gerais's highest Shiller PE Ratio was 274.33. The lowest was 5.59. And the median was 12.88.
USDMY's Shiller PE Ratio is ranked better than 82.97% of 411
companies
in the Steel industry
Industry Median: 14.28
vs USDMY: 6.57
E10 is a concept invented by Prof. Robert Shiller, who uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings of a company over the past 10 years.
Usinas Siderurgicas de Minas Gerais's adjusted earnings per share data for the three months ended in Jun. 2026 was $0.059. Add all the adjusted EPS for the past 10 years together and divide 10 will get our E10, which is $3.43 for the trailing ten years ended in Jun. 2026.
Shiller PE for Stocks: The True Measure of Stock Valuation
Usinas Siderurgicas de Minas Gerais (OTCPK:USDMY) Shiller PE Ratio Explanation
Compared with the regular PE Ratio, which works poorly for cyclical businesses, the Shiller PE Ratio smoothed out the fluctuations of profit margins during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Shiller PE Ratio should give similar results to regular PE Ratio.
Compared with the PS Ratio, the Shiller PE Ratio makes the comparison between different industries more meaningful.
Be Aware
Shiller PE Ratio assumes that over the long term, businesses and profitability revert to their means. If a company's business model does not work in the future compared with the past, Shiller PE Ratio and PS Ratio will give false valuations.
Usinas Siderurgicas de Minas Gerais Shiller PE Ratio Related Terms
Usinas Siderurgicas de Minas Gerais Shiller PE Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Usinas Siderurgicas de Minas Gerais Shiller PE Ratio Chart
USDMY vs NUE, STLD, RS: Shiller PE Ratio Comparison
For the Steel subindustry, Usinas Siderurgicas de Minas Gerais's Shiller PE Ratio, along with its competitors' market caps and Shiller PE Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Usinas Siderurgicas de Minas Gerais Shiller PE Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, Usinas Siderurgicas de Minas Gerais's Shiller PE Ratio distribution charts can be found below:
* The bar in red indicates where Usinas Siderurgicas de Minas Gerais's Shiller PE Ratio falls into.
Usinas Siderurgicas de Minas Gerais Shiller PE Ratio Calculation
For Shiller PE Ratio, the earnings of the past 10 years are inflation-adjusted and averaged. The result is used for P/E calculation. Since it looks at the average over the last 10 years, the Shiller PE Ratio is also called PE10.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The same calculation is applied here to individual companies.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Add all the adjusted EPS together and divide 10 will get our E10.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
Usinas Siderurgicas de Minas Gerais (USDMY) has a Shiller PE Ratio of 7.65 as of Sep. 03, 2026. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on Usinas Siderurgicas de Minas Gerais and its competitors. This is 41% below median its historical median of 12.88. Over the past decade, Usinas Siderurgicas de Minas Gerais' Shiller PE Ratio has ranged from 5.59 to 274.33. According to the industry distribution chart, Usinas Siderurgicas de Minas Gerais ranks #70 out of 411 companies in the Steel industry, placing it in the top 17%.
Is Usinas Siderurgicas de Minas Gerais' Shiller PE Ratio too high?
Usinas Siderurgicas de Minas Gerais' current Shiller PE Ratio of 7.65 is 41% below median its 10-year median of 12.88. Over the past 10 years, this metric has ranged from a low of 5.59 to a high of 274.33. The Steel industry median Shiller PE Ratio is 14.28. Usinas Siderurgicas de Minas Gerais' value of 7.65 is 46.4% below this industry median. Based on the distribution chart, Usinas Siderurgicas de Minas Gerais ranks #70 out of 411 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Usinas Siderurgicas de Minas Gerais has a GF Score™ of 61/100, reflecting its overall financial health beyond just this single metric.
How does Usinas Siderurgicas de Minas Gerais' Shiller PE Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, Usinas Siderurgicas de Minas Gerais ranks #70 out of 411 companies for Shiller PE Ratio. This places Usinas Siderurgicas de Minas Gerais in the top 17% of its industry — outperforming the majority of peers. The industry median Shiller PE Ratio is 14.28. Usinas Siderurgicas de Minas Gerais' value of 7.65 is 46.4% below this benchmark. Historically, Usinas Siderurgicas de Minas Gerais' own Shiller PE Ratio has ranged from 5.59 to 274.33 over the past decade. While the company's 10-year median is 12.88 vs. the industry median of 14.28, Usinas Siderurgicas de Minas Gerais has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Shiller PE Ratio for a Steel company?
The median Shiller PE Ratio among Steel companies is 14.28, based on 411 companies in the industry. Companies in the top quartile (top 25%) have a Shiller PE Ratio significantly above this median, while those in the bottom quartile fall well below. However, Shiller PE Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Usinas Siderurgicas de Minas Gerais's current Shiller PE Ratio of 7.65 is 46.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Shiller PE Ratio mean?
A high Shiller PE Ratio can signal that a stock is expensive relative to its fundamentals. Shiller price-earnings ratio is the ratio of share price to a company's inflation-adjusted earnings over a 10-year period. View historical data on Usinas Siderurgicas de Minas Gerais and its competitors. For the Steel industry, the median Shiller PE Ratio is 14.28 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Usinas Siderurgicas de Minas Gerais's current Shiller PE Ratio is 7.65, which is 41% below median its own 10-year median of 12.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Usinas Siderurgicas de Minas Gerais stock overvalued right now?
Usinas Siderurgicas de Minas Gerais (USDMY) has a current Shiller PE Ratio of 7.65. The stock's GF Value™ is $23.01, compared to a current price of $26.23 — trading 14% above its estimated fair value. The current Shiller PE Ratio is 7.65, which is 41% below median its 10-year median of 12.88 and 46.4% below the Steel industry median of 14.28. Usinas Siderurgicas de Minas Gerais' overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Shiller PE Ratio calculated?
Shiller PE Ratio is calculated from a company's financial statements. For Usinas Siderurgicas de Minas Gerais (USDMY), the current Shiller PE Ratio is 7.65 as of Sep. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Usinas Siderurgicas de Minas Gerais (USDMY) Overvalued in 2026?
Based on GuruFocus' analysis, Usinas Siderurgicas de Minas Gerais stock appears to be overvalued.
The current stock price of $26.23 is trading 14% above its estimated GF Value™ of $23.01.
Key valuation signals for USDMY:
Shiller PE Ratio: 7.65 (41% below median its 10-year median of 12.88)
GF Value™: $23.01 vs. price of $26.23 (14% above fair value)
Industry Position: 46.4% below the Steel median (#70 of 411)
No single metric tells the full story. See the USDMY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Usinas Siderurgicas de Minas Gerais SA is a Brazil-based company engaged in producing and distributing flat steel products. The company's product portfolio comprises ordinary heavy plates, Sincron series premium heavy plates, hot strips, cold-rolled, and galvanized products. These products are used in automotive, civil construction, railway, electric, white goods, offshore platforms, and agricultural and construction machinery. The Brazilian domestic market represents the majority of the company's sales, while the United States, Argentina, and Turkey are the export destination markets for the company.
61GF Score
Get the complete analysis for USDMY
Shiller PE Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
USDMY has been successfully added to your 
