AURT (Attune RTD) Asset Turnover: 0.00 (As of Sep. 2014)

What is Attune RTD Asset Turnover?

Attune RTD AURT Asset Turnover is 0.00 as of Sep. 2014.

Asset Turnover measures how quickly a company turns over its asset through sales. It is calculated as Revenue divided by Total Assets. Attune RTD's Revenue for the three months ended in Sep. 2014 was $0.00 Mil. Attune RTD's Total Assets for the quarter that ended in Sep. 2014 was $0.00 Mil. Therefore, Attune RTD's Asset Turnover for the quarter that ended in Sep. 2014 was 0.00.

Asset Turnover is linked to ROE % through Du Pont Formula. Attune RTD's annualized ROE % for the quarter that ended in Sep. 2014 was 1.09%. It is also linked to ROA % through Du Pont Formula. Attune RTD's annualized ROA % for the quarter that ended in Sep. 2014 was %.

Attune RTD (OTCPK:AURT) Asset Turnover Explanation

Asset Turnover is linked to ROE % through Du Pont Formula.

Attune RTD's annulized ROE % for the quarter that ended in Sep. 2014 is

	ROE %^**		(Q: Sep. 2014 )
=	Net Income	/	Total Stockholders Equity
=	-0.02	/	-1.8405
=	(Net Income / Revenue)	*	(Revenue / Total Assets)	*	(Total Assets / Total Stockholders Equity)
=	(-0.02 / 0)	*	(0 / 0)	*	(0/ -1.8405)
=	Net Margin %	*	Asset Turnover	*	Equity Multiplier
=	%	*		*	0
=	ROA %	*	Equity Multiplier
=	%	*	0
=	1.09 %

Note: The Net Income data used here is four times the quarterly (Sep. 2014) net income data. The Revenue data used here is four times the quarterly (Sep. 2014) revenue data.

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

^** The ROE % used above is for Du Pont Analysis only. It is different from the defined ROE % page on our website, as here it uses Net Income instead of Net Income attributable to Common Stockholders in the calculation.

It is also linked to ROA % through Du Pont Formula:

Attune RTD's annulized ROA % for the quarter that ended in Sep. 2014 is

	ROA %		(Q: Sep. 2014 )
=	Net Income	/	Total Assets
=	-0.02	/	0
=	(Net Income / Revenue)	*	(Revenue / Total Assets)
=	(-0.02 / 0)	*	(0 / 0)
=	Net Margin %	*	Asset Turnover
=	%	*
=	%

Note: The Net Income data used here is four times the quarterly (Sep. 2014) net income data. The Revenue data used here is four times the quarterly (Sep. 2014) revenue data.

Be Aware

In the article Joining The Dark Side: Pirates, Spies and Short Sellers, James Montier reported that In their US sample covering the period 1968-2003, Cooper et al find that firms with low asset growth outperformed firms with high asset growth by an astounding 20% p.a. equally weighted. Even when controlling for market, size and style, low asset growth firms outperformed high asset growth firms by 13% p.a. Therefore a company with fast asset growth may underperform.

Therefore, it is a good sign if a company's Asset Turnover is consistent or even increases. If a company's asset grows faster than sales, its Asset Turnover will decline, which can be a warning sign.

Attune RTD Asset Turnover Related Terms

Attune RTD Asset Turnover Historical Data

* Premium members only.

The historical data trend for Attune RTD's Asset Turnover can be seen below:

Attune RTD Asset Turnover Chart

Attune RTD Annual Data

Trend

Dec09

Dec10

Dec11

Dec12

Dec13

Asset Turnover

0.00

0.10

0.08

0.01

Attune RTD Quarterly Data
	Dec09	Mar10	Jun10	Sep10	Dec10	Mar11	Jun11	Sep11	Dec11	Mar12	Jun12	Sep12	Dec12	Mar13	Jun13	Sep13	Dec13	Mar14	Jun14	Sep14
Asset Turnover	Get a 7-Day Free Trial															0.00	0.00	0.00	0.00	0.00

AURT vs VSUL, TRWRF, UCLE: Asset Turnover Comparison

For the Scientific & Technical Instruments subindustry, Attune RTD's Asset Turnover, along with its competitors' market caps and Asset Turnover data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.

Attune RTD Asset Turnover vs Hardware Industry

For the Hardware industry and Technology sector, Attune RTD's Asset Turnover distribution charts can be found below:

* The bar in red indicates where Attune RTD's Asset Turnover falls into.

Save Embed

Attune RTD Asset Turnover Calculation

Asset Turnover measures how quickly a company turns over its asset through sales.

Attune RTD's Asset Turnover for the fiscal year that ended in Dec. 2013 is calculated as

	Asset Turnover
=	Revenue	/	Average Total Assets
=	Revenue (A: Dec. 2013 )	/	( (Total Assets (A: Dec. 2012 )	+	Total Assets (A: Dec. 2013 ))	/ count )
=	0.001	/	( (0.078	+	0)	/ 1 )
=	0.001	/	0.078
=	0.01

Attune RTD's Asset Turnover for the quarter that ended in Sep. 2014 is calculated as

	Asset Turnover
=	Revenue	/	Average Total Assets
=	Revenue (Q: Sep. 2014 )	/	( (Total Assets (Q: Jun. 2014 )	+	Total Assets (Q: Sep. 2014 ))	/ count )
=	0	/	( (0	+	0)	/ 1 )
=	0	/	0
=

Companies with low profit margins tend to have high Asset Turnover, while those with high profit margins have low Asset Turnover. Companies in the retail industry tend to have a very high turnover ratio.

Frequently Asked Questions Learn more about Asset Turnover →

What does a Asset Turnover of 0.00 mean?

Attune RTD (AURT) has a Asset Turnover of 0.00 as of Sep. 2014. Asset turnover equals current-period sales over average total assets over the past two periods. View historical data on Attune RTD and its competitors.

Is Attune RTD's Asset Turnover too high?

Attune RTD's current Asset Turnover is 0.00.

How does Attune RTD's Asset Turnover compare to VSUL and TRWRF?

Attune RTD's Asset Turnover of 0.00 can be compared against companies in the Hardware industry. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.

What is a good Asset Turnover for a Hardware company?

A good Asset Turnover depends on the Hardware industry context. However, Asset Turnover should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.

What does a high Asset Turnover mean?

A high Asset Turnover can signal that a stock is expensive relative to its fundamentals. Asset turnover equals current-period sales over average total assets over the past two periods. View historical data on Attune RTD and its competitors. Attune RTD's current Asset Turnover is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.

Is Attune RTD stock overvalued right now?

Attune RTD (AURT) has a current Asset Turnover of 0.00. The current Asset Turnover is 0.00. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.

How is Asset Turnover calculated?

Asset Turnover is calculated from a company's financial statements. For Attune RTD (AURT), the current Asset Turnover is 0.00 as of Sep. 2014. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Attune RTD Business Description

Industry Technology Hardware

Comparable Companies VSUL TRWRF UCLE SCND SMIT FLXT GIGA MKTY KRKNF ELSE SOTK AEMD DYSL TRCK TKOI MEEC ABIL EVSNF LUNA MIND

Address 8396 Paolmar Avenue, Yucca Valley, CA, USA, 92284

Website http://www.attunertd.com

Attune RTD is an environmentally conscious, socially responsible company providing smart products that eliminate inefficiencies, reduce energy consumption and more.