Tata Steel Thailand PCLFRA:MVX 52 WACC % is 5.85% as of Jun. 25, 2026, which is 42% below its 10-year median of 10.10. GuruFocus rates FRA:MVX with a GF Score™ of 52/100 and a GF Value™ of €0.02 (Fairly Valued). The stock has 5 warning signs investors should review. Among 643 Steel companies, Tata Steel Thailand PCL ranks worse than 63.61% on this metric.
As of today (2026-06-25), Tata Steel Thailand PCL's weighted average cost of capital is 5.85%%. Tata Steel Thailand PCL's ROIC % is 15.35% (calculated using TTM income statement data).
Tata Steel Thailand PCL generates higher returns on investment than it costs the company to raise the capital needed for that investment. It is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases.
For a comprehensive WACC calculation, please access the WACC Calculator.
Because it costs money to raise capital. A firm that generates higher ROIC % than it costs the company to raise the capital needed for that investment is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases, whereas a firm that earns returns that do not match up to its cost of capital will destroy value as it grows.
As of today, Tata Steel Thailand PCL's weighted average cost of capital is 5.85%%. Tata Steel Thailand PCL's ROIC % is 15.35% (calculated using TTM income statement data).
Tata Steel Thailand PCL generates higher returns on investment than it costs the company to raise the capital needed for that investment. It is earning excess returns. A firm that expects to continue generating positive excess returns on new investments in the future will see its value increase as growth increases.
Be Aware
1. GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding latest one-year quarterly average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together.
For companies that report quarterly, GuruFocus combines all of the most recent year's quarterly debt data from the beginning of the year to the year-end and calculates the average.
For companies that report semi-annually, GuruFocus combines all of the most recent year's semi-annual debt data from the start of the year to the year-end and calculates the average.
For companies that report annually, GuruFocus combines the beginning and ending annual debt data from the most recent year and then calculates the average.
2. The WACC formula discussed above does not include Preferred Stock. Please adjust if preferred stock is considered.
3. (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
4. GuruFocus uses the latest TTM Interest Expense divided by the latest one-year quarterly average debt to get the simplified cost of debt.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, Tata Steel Thailand PCL's WACC %, along with its competitors' market caps and WACC % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Tata Steel Thailand PCL WACC % vs Steel Industry
For the Steel industry and Basic Materials sector, Tata Steel Thailand PCL's WACC % distribution charts can be found below:
* The bar in red indicates where Tata Steel Thailand PCL's WACC % falls into.
The weighted average cost of capital (WACC) is the rate that a company is expected to pay on average to all its security holders to finance its assets. The WACC is commonly referred to as the firm's cost of capital. Generally speaking, a company's assets are financed by debt and equity. WACC is the average of the costs of these sources of financing, each of which is weighted by its respective use in the given situation. By taking a weighted average, we can see how much interest the company has to pay for every dollar it finances.
WACC
=
E
/
(E + D)
*
Cost of Equity
+
D
/
(E + D)
*
Cost of Debt
*
(1 - Tax Rate)
1. Weights:
Generally speaking, a company's assets are financed by debt and equity. We need to calculate the weight of equity and the weight of debt.
The market value of equity (E) is also called "Market Cap". As of today, Tata Steel Thailand PCL's market capitalization (E) is €186.750 Mil.
The market value of debt is typically difficult to calculate, therefore, GuruFocus uses book value of debt (D) to do the calculation. It is simplified by adding the latest one-year quarterly average Short-Term Debt & Capital Lease Obligation and Long-Term Debt & Capital Lease Obligation together. As of Mar. 2026, Tata Steel Thailand PCL's latest one-year quarterly average Book Value of Debt (D) is €15.9096 Mil.
a) weight of equity = E / (E + D) = 186.750 / (186.750 + 15.9096) = 0.9215
b) weight of debt = D / (E + D) = 15.9096 / (186.750 + 15.9096) = 0.0785
2. Cost of Equity:
GuruFocus uses Capital Asset Pricing Model (CAPM) to calculate the required rate of return. The formula is:
Cost of Equity = Risk-Free Rate of Return + Beta of Asset * (Expected Return of the Market - Risk-Free Rate of Return)
a) GuruFocus uses 10-Year Treasury Constant Maturity Rate as the risk-free rate. It is updated daily. The current risk-free rate is 4.386%. Please go to Economic Indicators page for more information. Please note that we use the 10-Year Treasury Constant Maturity Rate of the country/region where the company is headquartered. If the data for that country/region is not available, then we will use the 10-Year Treasury Constant Maturity Rate of the United States as default.
b) Beta is the sensitivity of the expected excess asset returns to the expected excess market returns. Tata Steel Thailand PCL's beta is 0.2717.
c) (Expected Return of the Market - Risk-Free Rate of Return) is also called market premium. GuruFocus requires market premium to be 6%.
Cost of Equity = 4.386% + 0.2717 * 6% = 6.0162%
3. Cost of Debt:
GuruFocus uses latest TTM Interest Expense divided by the latest one-year quarterly average debt to get the simplified cost of debt.
As of Mar. 2026, Tata Steel Thailand PCL's interest expense (positive number) was €0.78 Mil. Its total Book Value of Debt (D) is €15.9096 Mil.
Cost of Debt = 0.78 / 15.9096 = 4.9027%.
4. Multiply by one minus TTM Tax Rate:
GuruFocus uses the most recent TTM Tax Expense divided by the most recent TTM Pre-Tax Income to calculate the tax rate. The calculated TTM tax rate is limited to between 0% and 100%. If the calculated tax rate is higher than 100%, it is set to 100%. If the calculated tax rate is less than 0%, it is set to 0%.
The latest calculated TTM Tax Rate = 12.237 / 63.079 = 19.4%.
Tata Steel Thailand PCL's Weighted Average Cost Of Capital (WACC) for Today is calculated as:
WACC
=
E / (E + D)
*
Cost of Equity
+
D / (E + D)
*
Cost of Debt
*
(1 - Tax Rate)
=
0.9215
*
6.0162%
+
0.0785
*
4.9027%
*
(1 - 19.4%)
=
5.85%
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Tata Steel Thailand PCL (FRA:MVX) has a WACC % of 5.85% as of Jun. 25, 2026. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Tata Steel Thailand PCL and its competitors. This is 42% below median its historical median of 10.10. Over the past decade, Tata Steel Thailand PCL's WACC % has ranged from 1.21 to 13.40. According to the industry distribution chart, Tata Steel Thailand PCL ranks #409 out of 643 companies in the Steel industry, placing it in the top 63.6%.
Is Tata Steel Thailand PCL's WACC % too high?
Tata Steel Thailand PCL's current WACC % of 5.85% is 42% below median its 10-year median of 10.10. Over the past 10 years, this metric has ranged from a low of 1.21 to a high of 13.40. The Steel industry median WACC % is 7.78. Tata Steel Thailand PCL's value of 5.85% is 24.8% below this industry median. Based on the distribution chart, Tata Steel Thailand PCL ranks #409 out of 643 companies in the Steel industry, which is below the industry midpoint. Overall, Tata Steel Thailand PCL has a GF Score™ of 52/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Tata Steel Thailand PCL's WACC % compare to NUE and STLD?
According to the Steel industry distribution chart, Tata Steel Thailand PCL ranks #409 out of 643 companies for WACC %. This places Tata Steel Thailand PCL in the lower half of its industry. The industry median WACC % is 7.78. Tata Steel Thailand PCL's value of 5.85% is 24.8% below this benchmark. Historically, Tata Steel Thailand PCL's own WACC % has ranged from 1.21 to 13.40 over the past decade. While the company's 10-year median is 10.10 vs. the industry median of 7.78, Tata Steel Thailand PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good WACC % for a Steel company?
The median WACC % among Steel companies is 7.78, based on 643 companies in the industry. Companies in the top quartile (top 25%) have a WACC % significantly above this median, while those in the bottom quartile fall well below. However, WACC % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Tata Steel Thailand PCL's current WACC % of 5.85% is 24.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high WACC % mean?
A high WACC % can signal that a stock is expensive relative to its fundamentals. The weighted average cost of capital (WACC) is the average rate a company pays to finance assets. View historical data on Tata Steel Thailand PCL and its competitors. For the Steel industry, the median WACC % is 7.78 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Tata Steel Thailand PCL's current WACC % is 5.85%, which is 42% below median its own 10-year median of 10.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Tata Steel Thailand PCL stock overvalued right now?
Based on GuruFocus' analysis, Tata Steel Thailand PCL (FRA:MVX) is currently considered Fairly Valued. The stock's GF Value™ is €0.02, compared to a current price of €0.02 — trading 7.5% above its estimated fair value. The current WACC % is 5.85%, which is 42% below median its 10-year median of 10.10 and 24.8% below the Steel industry median of 7.78. Tata Steel Thailand PCL's overall GF Score™ is 52/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is WACC % calculated?
WACC % is calculated from a company's financial statements. For Tata Steel Thailand PCL (FRA:MVX), the current WACC % is 5.85% as of Jun. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Tata Steel Thailand PCL (FRA:MVX) Overvalued in 2026?
Based on GuruFocus' analysis, Tata Steel Thailand PCL stock appears to be overvalued.
The current stock price of €0.02 is trading 7.5% above its estimated GF Value™ of €0.02.
GuruFocus considers Tata Steel Thailand PCL to be Fairly Valued.
Key valuation signals for FRA:MVX:
WACC %: 5.85% (42% below median its 10-year median of 10.10)
GF Value™: €0.02 vs. price of €0.02 (7.5% above fair value)
Industry Position: 24.8% below the Steel median (#409 of 643)
No single metric tells the full story. See the FRA:MVX stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Tata Steel Thailand PCL is a Thailand-based holding company that is engaged in investing in other companies and providing management services. The company is engaged in manufacturing, rendering manufacturing services, distributing, and trading of steel bars, wire rods, and small-section products through its subsidiaries. The company operates in a single segment, being the Manufacturing and distribution of long steel products. Its product line includes rebar, deformed bar, round bar, cut and bend bars, wire rods, including high carbon wire rods and low carbon, special wire rods, and others.
52GF Score
Get the complete analysis for FRA:MVX
WACC % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:MVX has been successfully added to your 
