DPM MetalsASX:DPM +7.51%57 5-Year Yield-on-Cost % is 0.90 as of Jul. 11, 2026, which is 72% below its 10-year median of 3.22. GuruFocus rates ASX:DPM with a GF Score™ of 57/100 and a GF Value™ of A$27.06 (Significantly Overvalued). The stock has 2 warning signs investors should review. Among 347 Metals & Mining companies, DPM Metals ranks worse than 75.22% on this metric.
DPM Metals's yield on cost for the quarter that ended in Mar. 2026 was 0.90.
The historical rank and industry rank for DPM Metals's 5-Year Yield-on-Cost % or its related term are showing as below:
ASX:DPM'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.6 Med: 3.22 Max: 6.03
Current: 0.9
During the past 13 years, DPM Metals's highest Yield on Cost was 6.03. The lowest was 0.60. And the median was 3.22.
ASX:DPM's 5-Year Yield-on-Cost % is ranked worse than 75.22% of 347
companies
in the Metals & Mining industry
Industry Median: 2.14
vs ASX:DPM: 0.90
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
DPM Metals 5-Year Yield-on-Cost % Related Terms
ASX:DPM vs NEM, AU: 5-Year Yield-on-Cost % Comparison
For the Gold subindustry, DPM Metals's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
DPM Metals 5-Year Yield-on-Cost % vs Metals & Mining Industry
For the Metals & Mining industry and Basic Materials sector, DPM Metals's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where DPM Metals's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of DPM Metals is calculated as
DPM Metals (ASX:DPM) has a 5-Year Yield-on-Cost % of 0.90 as of Jul. 11, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on DPM Metals and its competitors. This is 72% below median its historical median of 3.22. Over the past decade, DPM Metals' 5-Year Yield-on-Cost % has ranged from 0.60 to 6.03. According to the industry distribution chart, DPM Metals ranks #261 out of 347 companies in the Metals & Mining industry, placing it in the top 75.2%.
Is DPM Metals' 5-Year Yield-on-Cost % too high?
DPM Metals' current 5-Year Yield-on-Cost % of 0.90 is 72% below median its 10-year median of 3.22. Over the past 10 years, this metric has ranged from a low of 0.60 to a high of 6.03. The Metals & Mining industry median 5-Year Yield-on-Cost % is 2.14. DPM Metals' value of 0.90 is 57.9% below this industry median. Based on the distribution chart, DPM Metals ranks #261 out of 347 companies in the Metals & Mining industry, which is in the bottom quartile relative to peers. Overall, DPM Metals has a GF Score™ of 57/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does DPM Metals' 5-Year Yield-on-Cost % compare to NEM and AU?
According to the Metals & Mining industry distribution chart, DPM Metals ranks #261 out of 347 companies for 5-Year Yield-on-Cost %. This places DPM Metals in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 2.14. DPM Metals' value of 0.90 is 57.9% below this benchmark. Historically, DPM Metals' own 5-Year Yield-on-Cost % has ranged from 0.60 to 6.03 over the past decade. While the company's 10-year median is 3.22 vs. the industry median of 2.14, DPM Metals has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Metals & Mining company?
The median 5-Year Yield-on-Cost % among Metals & Mining companies is 2.14, based on 347 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. DPM Metals's current 5-Year Yield-on-Cost % of 0.90 is 57.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on DPM Metals and its competitors. For the Metals & Mining industry, the median 5-Year Yield-on-Cost % is 2.14 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. DPM Metals's current 5-Year Yield-on-Cost % is 0.90, which is 72% below median its own 10-year median of 3.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is DPM Metals stock overvalued right now?
Based on GuruFocus' analysis, DPM Metals (ASX:DPM) is currently considered Significantly Overvalued. The stock's GF Value™ is A$27.06, compared to a current price of A$50.81 — trading 87.8% above its estimated fair value. The current 5-Year Yield-on-Cost % is 0.90, which is 72% below median its 10-year median of 3.22 and 57.9% below the Metals & Mining industry median of 2.14. DPM Metals' overall GF Score™ is 57/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For DPM Metals (ASX:DPM), the current 5-Year Yield-on-Cost % is 0.90 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is DPM Metals (ASX:DPM) Overvalued in 2026?
Based on GuruFocus' analysis, DPM Metals stock appears to be overvalued.
The current stock price of A$50.81 is trading 87.8% above its estimated GF Value™ of A$27.06.
GuruFocus considers DPM Metals to be Significantly Overvalued.
Key valuation signals for ASX:DPM:
5-Year Yield-on-Cost %: 0.90 (72% below median its 10-year median of 3.22)
GF Value™: A$27.06 vs. price of A$50.81 (87.8% above fair value)
Industry Position: 57.9% below the Metals & Mining median (#261 of 347)
No single metric tells the full story. See the ASX:DPM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
DPM Metals Inc is an international mining company engaged in the acquisition, exploration, development, mining, and processing of precious metals. The company's projects include are located in Bulgaria, Ecuador, Serbia and Bosnia.
57GF Score
Get the complete analysis for ASX:DPM
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ASX:DPM has been successfully added to your 