Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jiangsu Wanda Special Bearing CoBJSE:920002 36 5-Year Yield-on-Cost % is 0.46 as of Sep. 04, 2026, which is 70% above its 10-year median of 0.27. GuruFocus rates BJSE:920002 with a GF Score™ of 36/100. The stock has 1 warning sign investors should review. Among 844 Vehicles & Parts companies, Jiangsu Wanda Special Bearing Co ranks worse than 89.1% on this metric.
The historical rank and industry rank for Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % or its related term are showing as below:
BJSE:920002'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.08 Med: 0.27 Max: 0.53
Current: 0.46
During the past 6 years, Jiangsu Wanda Special Bearing Co's highest Yield on Cost was 0.53. The lowest was 0.08. And the median was 0.27.
BJSE:920002's 5-Year Yield-on-Cost % is ranked worse than 89.1% of 844
companies
in the Vehicles & Parts industry
Industry Median: 3.21
vs BJSE:920002: 0.46
Jiangsu Wanda Special Bearing Co (BJSE:920002) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Jiangsu Wanda Special Bearing Co 5-Year Yield-on-Cost % Related Terms
BJSE:920002 vs ORLY, AZO, GPC: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jiangsu Wanda Special Bearing Co 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % falls into.
Jiangsu Wanda Special Bearing Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Jiangsu Wanda Special Bearing Co (BJSE:920002) has a 5-Year Yield-on-Cost % of 0.46 as of Sep. 04, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Jiangsu Wanda Special Bearing Co and its competitors. This is 70% above median its historical median of 0.27. Over the past decade, Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % has ranged from 0.08 to 0.53. According to the industry distribution chart, Jiangsu Wanda Special Bearing Co ranks #752 out of 844 companies in the Vehicles & Parts industry, placing it in the top 89.1%.
Is Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % too high?
Jiangsu Wanda Special Bearing Co's current 5-Year Yield-on-Cost % of 0.46 is 70% above median its 10-year median of 0.27. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 0.53. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.21. Jiangsu Wanda Special Bearing Co's value of 0.46 is 85.7% below this industry median. Based on the distribution chart, Jiangsu Wanda Special Bearing Co ranks #752 out of 844 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Jiangsu Wanda Special Bearing Co has a GF Score™ of 36/100, reflecting its overall financial health beyond just this single metric.
How does Jiangsu Wanda Special Bearing Co's 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Jiangsu Wanda Special Bearing Co ranks #752 out of 844 companies for 5-Year Yield-on-Cost %. This places Jiangsu Wanda Special Bearing Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.21. Jiangsu Wanda Special Bearing Co's value of 0.46 is 85.7% below this benchmark. Historically, Jiangsu Wanda Special Bearing Co's own 5-Year Yield-on-Cost % has ranged from 0.08 to 0.53 over the past decade. While the company's 10-year median is 0.27 vs. the industry median of 3.21, Jiangsu Wanda Special Bearing Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.21, based on 844 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jiangsu Wanda Special Bearing Co's current 5-Year Yield-on-Cost % of 0.46 is 85.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Jiangsu Wanda Special Bearing Co and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jiangsu Wanda Special Bearing Co's current 5-Year Yield-on-Cost % is 0.46, which is 70% above median its own 10-year median of 0.27. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jiangsu Wanda Special Bearing Co stock overvalued right now?
Jiangsu Wanda Special Bearing Co (BJSE:920002) has a current 5-Year Yield-on-Cost % of 0.46. The current 5-Year Yield-on-Cost % is 0.46, which is 70% above median its 10-year median of 0.27 and 85.7% below the Vehicles & Parts industry median of 3.21. Jiangsu Wanda Special Bearing Co's overall GF Score™ is 36/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Jiangsu Wanda Special Bearing Co (BJSE:920002), the current 5-Year Yield-on-Cost % is 0.46 as of Sep. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Jiangsu Wanda Special Bearing Co Ltd is engaged in research and development, production and sales of forklift bearings and slewing bearings. Its products include four major categories: 1. Forklift bearing series (main rollers, side rollers, sprockets); 2. Combined roller bearing series; 3. Full complement cylindrical roller bearings Series; 4. Precision slewing bearing series.
36GF Score
Get the complete analysis for BJSE:920002
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BJSE:920002 has been successfully added to your 
