Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Bangkok Sheet Metal PCLBKK:BM +0.79%60 5-Year Yield-on-Cost % is 7.28 as of Aug. 20, 2026, which is 22% above its 10-year median of 5.98. GuruFocus rates BKK:BM with a GF Score™ of 60/100 and a GF Value™ of ฿2.79 (Possible Value Trap). The stock has 11 warning signs investors should review. Among 1,894 Industrial Products companies, Bangkok Sheet Metal PCL ranks better than 86.22% on this metric.
The historical rank and industry rank for Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % or its related term are showing as below:
BKK:BM'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.39 Med: 5.98 Max: 31.49
Current: 7.28
During the past 11 years, Bangkok Sheet Metal PCL's highest Yield on Cost was 31.49. The lowest was 1.39. And the median was 5.98.
BKK:BM's 5-Year Yield-on-Cost % is ranked better than 86.22% of 1894
companies
in the Industrial Products industry
Industry Median: 1.865
vs BKK:BM: 7.28
Bangkok Sheet Metal PCL (BKK:BM) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Bangkok Sheet Metal PCL 5-Year Yield-on-Cost % Related Terms
BKK:BM vs CRS, ATI, MLI: 5-Year Yield-on-Cost % Comparison
For the Metal Fabrication subindustry, Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Bangkok Sheet Metal PCL 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % falls into.
Bangkok Sheet Metal PCL 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Bangkok Sheet Metal PCL (BKK:BM) has a 5-Year Yield-on-Cost % of 7.28 as of Aug. 20, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Bangkok Sheet Metal PCL and its competitors. This is 22% above median its historical median of 5.98. Over the past decade, Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % has ranged from 1.39 to 31.49. According to the industry distribution chart, Bangkok Sheet Metal PCL ranks #261 out of 1894 companies in the Industrial Products industry, placing it in the top 13.8%.
Is Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % too high?
Bangkok Sheet Metal PCL's current 5-Year Yield-on-Cost % of 7.28 is 22% above median its 10-year median of 5.98. Over the past 10 years, this metric has ranged from a low of 1.39 to a high of 31.49. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.87. Bangkok Sheet Metal PCL's value of 7.28 is 290.3% above this industry median. Based on the distribution chart, Bangkok Sheet Metal PCL ranks #261 out of 1894 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Bangkok Sheet Metal PCL has a GF Score™ of 60/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Bangkok Sheet Metal PCL's 5-Year Yield-on-Cost % compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Bangkok Sheet Metal PCL ranks #261 out of 1894 companies for 5-Year Yield-on-Cost %. This places Bangkok Sheet Metal PCL in the top 14% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.87. Bangkok Sheet Metal PCL's value of 7.28 is 290.3% above this benchmark. Historically, Bangkok Sheet Metal PCL's own 5-Year Yield-on-Cost % has ranged from 1.39 to 31.49 over the past decade. While the company's 10-year median is 5.98 vs. the industry median of 1.87, Bangkok Sheet Metal PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.87, based on 1,894 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Bangkok Sheet Metal PCL's current 5-Year Yield-on-Cost % of 7.28 is 290.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Bangkok Sheet Metal PCL and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Bangkok Sheet Metal PCL's current 5-Year Yield-on-Cost % is 7.28, which is 22% above median its own 10-year median of 5.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Bangkok Sheet Metal PCL stock overvalued right now?
Based on GuruFocus' analysis, Bangkok Sheet Metal PCL (BKK:BM) is currently considered Possible Value Trap. The stock's GF Value™ is ฿2.79, compared to a current price of ฿1.27 — trading 54.5% below its estimated fair value. The current 5-Year Yield-on-Cost % is 7.28, which is 22% above median its 10-year median of 5.98 and 290.3% above the Industrial Products industry median of 1.87. Bangkok Sheet Metal PCL's overall GF Score™ is 60/100 with 11 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Bangkok Sheet Metal PCL (BKK:BM), the current 5-Year Yield-on-Cost % is 7.28 as of Aug. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Bangkok Sheet Metal PCL (BKK:BM) Overvalued in 2026?
Based on GuruFocus' analysis, Bangkok Sheet Metal PCL stock appears to be undervalued.
The current stock price of ฿1.27 is trading 54.5% below its estimated GF Value™ of ฿2.79.
GuruFocus considers Bangkok Sheet Metal PCL to be Possible Value Trap.
Key valuation signals for BKK:BM:
5-Year Yield-on-Cost %: 7.28 (22% above median its 10-year median of 5.98)
GF Value™: ฿2.79 vs. price of ฿1.27 (54.5% below fair value)
Industry Position: 290.3% above the Industrial Products median (#261 of 1894)
No single metric tells the full story. See the BKK:BM stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Bangkok Sheet Metal PCL is a Thailand-based company engaged in manufacturing and distributing processed metal products. The company's main products are classified into the categories of Metal trunking and white conduits, Communication racks, cabinets and enclosures, Electrical switchboards and lighting fixtures, Fabrication, and metalworking, Mold and die-making machine tools and equipment, Sheet metal parts, press parts, machine parts, and assembly parts. Its products are mainly used in office buildings, condominiums, superstores, factories, and Bangkok mass transit stations. The company generates the majority of its revenue from the Domestic market.
60GF Score
Get the complete analysis for BKK:BM
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:BM has been successfully added to your 
