Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Taparia ToolsBOM:505685 85 5-Year Yield-on-Cost % is 556.01 as of Sep. 07, 2026, which is 2% above its 10-year median of 547.62. GuruFocus rates BOM:505685 with a GF Score™ of 85/100 and a GF Value™ of ₹12.22 (Fairly Valued). Among 1,873 Industrial Products companies, Taparia Tools ranks better than 99.95% on this metric.
Taparia Tools's yield on cost for the quarter that ended in Jun. 2026 was 556.01.
The historical rank and industry rank for Taparia Tools's 5-Year Yield-on-Cost % or its related term are showing as below:
BOM:505685'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 70.14 Med: 547.62 Max: 1976.19
Current: 556.01
During the past 13 years, Taparia Tools's highest Yield on Cost was 1976.19. The lowest was 70.14. And the median was 547.62.
BOM:505685's 5-Year Yield-on-Cost % is ranked better than 99.95% of 1873
companies
in the Industrial Products industry
Industry Median: 1.92
vs BOM:505685: 556.01
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Taparia Tools 5-Year Yield-on-Cost % Related Terms
BOM:505685 vs SNA, RBC, LECO: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Taparia Tools's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Taparia Tools 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Taparia Tools's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Taparia Tools's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Taparia Tools is calculated as
What does a 5-Year Yield-on-Cost % of 556.01 mean?
Taparia Tools (BOM:505685) has a 5-Year Yield-on-Cost % of 556.01 as of Sep. 07, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Taparia Tools and its competitors. This is near median its historical median of 547.62. Over the past decade, Taparia Tools' 5-Year Yield-on-Cost % has ranged from 70.14 to 1,976.19. According to the industry distribution chart, Taparia Tools ranks #1 out of 1873 companies in the Industrial Products industry, placing it in the top 0.099999999999994%.
Is Taparia Tools' 5-Year Yield-on-Cost % too high?
Taparia Tools' current 5-Year Yield-on-Cost % of 556.01 is near median its 10-year median of 547.62. Over the past 10 years, this metric has ranged from a low of 70.14 to a high of 1,976.19. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.92. Taparia Tools' value of 556.01 is 28858.9% above this industry median. Based on the distribution chart, Taparia Tools ranks #1 out of 1873 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Taparia Tools has a GF Score™ of 85/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Taparia Tools' 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Taparia Tools ranks #1 out of 1873 companies for 5-Year Yield-on-Cost %. This places Taparia Tools in the top 0% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.92. Taparia Tools' value of 556.01 is 28858.9% above this benchmark. Historically, Taparia Tools' own 5-Year Yield-on-Cost % has ranged from 70.14 to 1,976.19 over the past decade. While the company's 10-year median is 547.62 vs. the industry median of 1.92, Taparia Tools has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.92, based on 1,873 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Taparia Tools's current 5-Year Yield-on-Cost % of 556.01 is 28858.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Taparia Tools and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.92 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Taparia Tools's current 5-Year Yield-on-Cost % is 556.01, which is near median its own 10-year median of 547.62. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Taparia Tools stock overvalued right now?
Based on GuruFocus' analysis, Taparia Tools (BOM:505685) is currently considered Fairly Valued. The stock's GF Value™ is ₹12.22, compared to a current price of ₹12.14 — trading 0.7% below its estimated fair value. The current 5-Year Yield-on-Cost % is 556.01, which is near median its 10-year median of 547.62 and 28858.9% above the Industrial Products industry median of 1.92. Taparia Tools' overall GF Score™ is 85/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Taparia Tools (BOM:505685), the current 5-Year Yield-on-Cost % is 556.01 as of Sep. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Taparia Tools (BOM:505685) Overvalued in 2026?
Based on GuruFocus' analysis, Taparia Tools stock appears to be undervalued.
The current stock price of ₹12.14 is trading 0.7% below its estimated GF Value™ of ₹12.22.
GuruFocus considers Taparia Tools to be Fairly Valued.
Key valuation signals for BOM:505685:
5-Year Yield-on-Cost %: 556.01 (near median its 10-year median of 547.62)
GF Value™: ₹12.22 vs. price of ₹12.14 (0.7% below fair value)
Industry Position: 28858.9% above the Industrial Products median (#1 of 1873)
No single metric tells the full story. See the BOM:505685 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Taparia Tools Ltd manufactures and trades in hand tools in India. It offers adjustable spanners, pliers, mini pliers, screwdriver bits and sets, toolsets, sockets, socket accessories, socket sets, torque wrenches, pipe wrenches and vice, hammers, clamps, wheel spanners and sets, and other tools. The company operates in a single business segment, which is manufacturing hand tools.
85GF Score
Get the complete analysis for BOM:505685
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:505685 has been successfully added to your 
