Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
BSRM SteelsDHA:BSRMSTEEL 90 5-Year Yield-on-Cost % is 6.55 as of Sep. 07, 2026, which is 18% above its 10-year median of 5.55. GuruFocus rates DHA:BSRMSTEEL with a GF Score™ of 90/100 and a GF Value™ of BDT90.92 (Fairly Valued). The stock has 7 warning signs investors should review. Among 313 Steel companies, BSRM Steels ranks better than 72.2% on this metric.
BSRM Steels's yield on cost for the quarter that ended in Mar. 2026 was 6.55.
The historical rank and industry rank for BSRM Steels's 5-Year Yield-on-Cost % or its related term are showing as below:
DHA:BSRMSTEEL'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.84 Med: 5.55 Max: 9.48
Current: 6.55
During the past 13 years, BSRM Steels's highest Yield on Cost was 9.48. The lowest was 1.84. And the median was 5.55.
DHA:BSRMSTEEL's 5-Year Yield-on-Cost % is ranked better than 72.2% of 313
companies
in the Steel industry
Industry Median: 3.26
vs DHA:BSRMSTEEL: 6.55
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
BSRM Steels 5-Year Yield-on-Cost % Related Terms
DHA:BSRMSTEEL vs NUE, STLD, RS: 5-Year Yield-on-Cost % Comparison
For the Steel subindustry, BSRM Steels's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
BSRM Steels 5-Year Yield-on-Cost % vs Steel Industry
For the Steel industry and Basic Materials sector, BSRM Steels's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where BSRM Steels's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of BSRM Steels is calculated as
BSRM Steels (DHA:BSRMSTEEL) has a 5-Year Yield-on-Cost % of 6.55 as of Sep. 07, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on BSRM Steels and its competitors. This is 18% above median its historical median of 5.55. Over the past decade, BSRM Steels' 5-Year Yield-on-Cost % has ranged from 1.84 to 9.48. According to the industry distribution chart, BSRM Steels ranks #87 out of 313 companies in the Steel industry, placing it in the top 27.8%.
Is BSRM Steels' 5-Year Yield-on-Cost % too high?
BSRM Steels' current 5-Year Yield-on-Cost % of 6.55 is 18% above median its 10-year median of 5.55. Over the past 10 years, this metric has ranged from a low of 1.84 to a high of 9.48. The Steel industry median 5-Year Yield-on-Cost % is 3.26. BSRM Steels' value of 6.55 is 100.9% above this industry median. Based on the distribution chart, BSRM Steels ranks #87 out of 313 companies in the Steel industry, which is above the industry midpoint. Overall, BSRM Steels has a GF Score™ of 90/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does BSRM Steels' 5-Year Yield-on-Cost % compare to NUE and STLD?
According to the Steel industry distribution chart, BSRM Steels ranks #87 out of 313 companies for 5-Year Yield-on-Cost %. This puts BSRM Steels in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 3.26. BSRM Steels' value of 6.55 is 100.9% above this benchmark. Historically, BSRM Steels' own 5-Year Yield-on-Cost % has ranged from 1.84 to 9.48 over the past decade. While the company's 10-year median is 5.55 vs. the industry median of 3.26, BSRM Steels has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.26, based on 313 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. BSRM Steels's current 5-Year Yield-on-Cost % of 6.55 is 100.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on BSRM Steels and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.26 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. BSRM Steels's current 5-Year Yield-on-Cost % is 6.55, which is 18% above median its own 10-year median of 5.55. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is BSRM Steels stock overvalued right now?
Based on GuruFocus' analysis, BSRM Steels (DHA:BSRMSTEEL) is currently considered Fairly Valued. The stock's GF Value™ is BDT90.92, compared to a current price of BDT89.20 — trading 1.9% below its estimated fair value. The current 5-Year Yield-on-Cost % is 6.55, which is 18% above median its 10-year median of 5.55 and 100.9% above the Steel industry median of 3.26. BSRM Steels' overall GF Score™ is 90/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For BSRM Steels (DHA:BSRMSTEEL), the current 5-Year Yield-on-Cost % is 6.55 as of Sep. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is BSRM Steels (DHA:BSRMSTEEL) Overvalued in 2026?
Based on GuruFocus' analysis, BSRM Steels stock appears to be undervalued.
The current stock price of BDT89.20 is trading 1.9% below its estimated GF Value™ of BDT90.92.
GuruFocus considers BSRM Steels to be Fairly Valued.
Key valuation signals for DHA:BSRMSTEEL:
5-Year Yield-on-Cost %: 6.55 (18% above median its 10-year median of 5.55)
GF Value™: BDT90.92 vs. price of BDT89.20 (1.9% below fair value)
Industry Position: 100.9% above the Steel median (#87 of 313)
No single metric tells the full story. See the DHA:BSRMSTEEL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
BSRM Steels Ltd is a steel manufacturing company. The firm has two reportable segments namely M.S Rod and M.S Billets. The M.S Rod segment produces different graded Rod and sells the same to several dealers, end-users, other corporate users, Government projects, etc. The M.S Billets segment produces different graded Billets and uses them for the production of M.S Rod.
90GF Score
Get the complete analysis for DHA:BSRMSTEEL
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
DHA:BSRMSTEEL has been successfully added to your 
