Stanley Black & DeckerMEX:SWK 64 5-Year Yield-on-Cost % is 4.35 as of Jul. 02, 2026, which is 88% above its 10-year median of 2.32. GuruFocus rates MEX:SWK with a GF Score™ of 64/100 and a GF Value™ of MXN1,441.62 (Modestly Overvalued). The stock has 11 warning signs investors should review. Among 1,924 Industrial Products companies, Stanley Black & Decker ranks better than 73.7% on this metric.
Stanley Black & Decker's yield on cost for the quarter that ended in Mar. 2026 was 4.35.
The historical rank and industry rank for Stanley Black & Decker's 5-Year Yield-on-Cost % or its related term are showing as below:
MEX:SWK'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.49 Med: 2.32 Max: 6.73
Current: 4.35
During the past 13 years, Stanley Black & Decker's highest Yield on Cost was 6.73. The lowest was 1.49. And the median was 2.32.
MEX:SWK's 5-Year Yield-on-Cost % is ranked better than 73.7% of 1924
companies
in the Industrial Products industry
Industry Median: 1.77
vs MEX:SWK: 4.35
Stanley Black & Decker (MEX:SWK) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Stanley Black & Decker 5-Year Yield-on-Cost % Related Terms
MEX:SWK vs LECO, TKR, TTC: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Stanley Black & Decker's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Stanley Black & Decker 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Stanley Black & Decker's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Stanley Black & Decker's 5-Year Yield-on-Cost % falls into.
Stanley Black & Decker 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Stanley Black & Decker (MEX:SWK) has a 5-Year Yield-on-Cost % of 4.35 as of Jul. 02, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Stanley Black & Decker and its competitors. This is 88% above median its historical median of 2.32. Over the past decade, Stanley Black & Decker's 5-Year Yield-on-Cost % has ranged from 1.49 to 6.73. According to the industry distribution chart, Stanley Black & Decker ranks #506 out of 1924 companies in the Industrial Products industry, placing it in the top 26.3%.
Is Stanley Black & Decker's 5-Year Yield-on-Cost % too high?
Stanley Black & Decker's current 5-Year Yield-on-Cost % of 4.35 is 88% above median its 10-year median of 2.32. Over the past 10 years, this metric has ranged from a low of 1.49 to a high of 6.73. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.77. Stanley Black & Decker's value of 4.35 is 145.8% above this industry median. Based on the distribution chart, Stanley Black & Decker ranks #506 out of 1924 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Stanley Black & Decker has a GF Score™ of 64/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Stanley Black & Decker's 5-Year Yield-on-Cost % compare to LECO and TKR?
According to the Industrial Products industry distribution chart, Stanley Black & Decker ranks #506 out of 1924 companies for 5-Year Yield-on-Cost %. This puts Stanley Black & Decker in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 1.77. Stanley Black & Decker's value of 4.35 is 145.8% above this benchmark. Historically, Stanley Black & Decker's own 5-Year Yield-on-Cost % has ranged from 1.49 to 6.73 over the past decade. While the company's 10-year median is 2.32 vs. the industry median of 1.77, Stanley Black & Decker has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.77, based on 1,924 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Stanley Black & Decker's current 5-Year Yield-on-Cost % of 4.35 is 145.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Stanley Black & Decker and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.77 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Stanley Black & Decker's current 5-Year Yield-on-Cost % is 4.35, which is 88% above median its own 10-year median of 2.32. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Stanley Black & Decker stock overvalued right now?
Based on GuruFocus' analysis, Stanley Black & Decker (MEX:SWK) is currently considered Modestly Overvalued. The stock's GF Value™ is MXN1,441.62, compared to a current price of MXN1,602.50 — trading 11.2% above its estimated fair value. The current 5-Year Yield-on-Cost % is 4.35, which is 88% above median its 10-year median of 2.32 and 145.8% above the Industrial Products industry median of 1.77. Stanley Black & Decker's overall GF Score™ is 64/100 with 11 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Stanley Black & Decker (MEX:SWK), the current 5-Year Yield-on-Cost % is 4.35 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Stanley Black & Decker (MEX:SWK) Overvalued in 2026?
Based on GuruFocus' analysis, Stanley Black & Decker stock appears to be overvalued.
The current stock price of MXN1,602.50 is trading 11.2% above its estimated GF Value™ of MXN1,441.62.
GuruFocus considers Stanley Black & Decker to be Modestly Overvalued.
Key valuation signals for MEX:SWK:
5-Year Yield-on-Cost %: 4.35 (88% above median its 10-year median of 2.32)
GF Value™: MXN1,441.62 vs. price of MXN1,602.50 (11.2% above fair value)
Industry Position: 145.8% above the Industrial Products median (#506 of 1924)
No single metric tells the full story. See the MEX:SWK stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Stanley Black & Decker Inc offers hand tools, power tools, outdoor products, engineered fastening solutions, and related accessories. The company operates in two reportable business segments: Tools & Outdoor and Engineered Fastening. The majority of its revenue is generated from the Tools & Outdoor segment, which is comprised of the Power Tools Group (PTG), Hand Tools, Accessories and Storage (HTAS), and Outdoor Power Equipment (Outdoor) product lines. This segment's product offerings include drills, impact wrenches and drivers, grinders, saws, hammers, demolition tools, clamps, vises, knives, edge trimmers, lawn mowers, etc., which are offered through brands like Hustler, Dewalt, Craftsman, Stanley, and others. Geographically, the firm derives maximum revenue from the United States.
64GF Score
Get the complete analysis for MEX:SWK
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MEX:SWK has been successfully added to your 