Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Harsha Engineers InternationalNSE:HARSHA +0.75%86 5-Year Yield-on-Cost % is 0.38 as of Aug. 01, 2026, which is 52% above its 10-year median of 0.25. GuruFocus rates NSE:HARSHA with a GF Score™ of 86/100 and a GF Value™ of ₹504.13 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 1,911 Industrial Products companies, Harsha Engineers International ranks worse than 86.92% on this metric.
The historical rank and industry rank for Harsha Engineers International's 5-Year Yield-on-Cost % or its related term are showing as below:
NSE:HARSHA'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.17 Med: 0.25 Max: 0.38
Current: 0.38
During the past 7 years, Harsha Engineers International's highest Yield on Cost was 0.38. The lowest was 0.17. And the median was 0.25.
NSE:HARSHA's 5-Year Yield-on-Cost % is ranked worse than 86.92% of 1911
companies
in the Industrial Products industry
Industry Median: 1.95
vs NSE:HARSHA: 0.38
Harsha Engineers International (NSE:HARSHA) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Harsha Engineers International 5-Year Yield-on-Cost % Related Terms
NSE:HARSHA vs SNA, RBC, SWK: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Harsha Engineers International's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Harsha Engineers International 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Harsha Engineers International's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Harsha Engineers International's 5-Year Yield-on-Cost % falls into.
Harsha Engineers International 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Harsha Engineers International (NSE:HARSHA) has a 5-Year Yield-on-Cost % of 0.38 as of Aug. 01, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Harsha Engineers International and its competitors. This is 52% above median its historical median of 0.25. Over the past decade, Harsha Engineers International's 5-Year Yield-on-Cost % has ranged from 0.17 to 0.38. According to the industry distribution chart, Harsha Engineers International ranks #1661 out of 1911 companies in the Industrial Products industry, placing it in the top 86.9%.
Is Harsha Engineers International's 5-Year Yield-on-Cost % too high?
Harsha Engineers International's current 5-Year Yield-on-Cost % of 0.38 is 52% above median its 10-year median of 0.25. Over the past 10 years, this metric has ranged from a low of 0.17 to a high of 0.38. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.95. Harsha Engineers International's value of 0.38 is 80.5% below this industry median. Based on the distribution chart, Harsha Engineers International ranks #1661 out of 1911 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Harsha Engineers International has a GF Score™ of 86/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Harsha Engineers International's 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Harsha Engineers International ranks #1661 out of 1911 companies for 5-Year Yield-on-Cost %. This places Harsha Engineers International in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.95. Harsha Engineers International's value of 0.38 is 80.5% below this benchmark. Historically, Harsha Engineers International's own 5-Year Yield-on-Cost % has ranged from 0.17 to 0.38 over the past decade. While the company's 10-year median is 0.25 vs. the industry median of 1.95, Harsha Engineers International has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.95, based on 1,911 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Harsha Engineers International's current 5-Year Yield-on-Cost % of 0.38 is 80.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Harsha Engineers International and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.95 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Harsha Engineers International's current 5-Year Yield-on-Cost % is 0.38, which is 52% above median its own 10-year median of 0.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Harsha Engineers International stock overvalued right now?
Based on GuruFocus' analysis, Harsha Engineers International (NSE:HARSHA) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹504.13, compared to a current price of ₹401.05 — trading 20.4% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.38, which is 52% above median its 10-year median of 0.25 and 80.5% below the Industrial Products industry median of 1.95. Harsha Engineers International's overall GF Score™ is 86/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Harsha Engineers International (NSE:HARSHA), the current 5-Year Yield-on-Cost % is 0.38 as of Aug. 01, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Harsha Engineers International (NSE:HARSHA) Overvalued in 2026?
Based on GuruFocus' analysis, Harsha Engineers International stock appears to be undervalued.
The current stock price of ₹401.05 is trading 20.4% below its estimated GF Value™ of ₹504.13.
GuruFocus considers Harsha Engineers International to be Modestly Undervalued.
Key valuation signals for NSE:HARSHA:
5-Year Yield-on-Cost %: 0.38 (52% above median its 10-year median of 0.25)
GF Value™: ₹504.13 vs. price of ₹401.05 (20.4% below fair value)
Industry Position: 80.5% below the Industrial Products median (#1661 of 1911)
No single metric tells the full story. See the NSE:HARSHA stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Harsha Engineers International Ltd is a manufacturer of precision bearing cages. The company supplies its products to customers covering five continents such as North America, Europe, Asia, South America, and Africa. It comprises two segments: Engineering business, under which the company manufactures bearing cages (in brass, steel, and polyamide materials), complex and specialized precision stamped components, welded assemblies and brass castings and cages & bronze bushings: and Solar EPC business, under which the company provide complete comprehensive turnkey solutions to all solar photovoltaic requirements and provides operations and maintenance services in the solar sector.
86GF Score
Get the complete analysis for NSE:HARSHA
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:HARSHA has been successfully added to your 
