Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Mold-tek PackagingNSE:MOLDTKPAC -0.22%94 5-Year Yield-on-Cost % is 0.61 as of Aug. 19, 2026, which is 38% below its 10-year median of 0.99. GuruFocus rates NSE:MOLDTKPAC with a GF Score™ of 94/100 and a GF Value™ of ₹896.03 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 242 Packaging & Containers companies, Mold-tek Packaging ranks worse than 88.02% on this metric.
Mold-tek Packaging's yield on cost for the quarter that ended in Jun. 2026 was 0.61.
The historical rank and industry rank for Mold-tek Packaging's 5-Year Yield-on-Cost % or its related term are showing as below:
NSE:MOLDTKPAC'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.37 Med: 0.99 Max: 5.57
Current: 0.61
During the past 13 years, Mold-tek Packaging's highest Yield on Cost was 5.57. The lowest was 0.37. And the median was 0.99.
NSE:MOLDTKPAC's 5-Year Yield-on-Cost % is ranked worse than 88.02% of 242
companies
in the Packaging & Containers industry
Industry Median: 3.04
vs NSE:MOLDTKPAC: 0.61
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Mold-tek Packaging 5-Year Yield-on-Cost % Related Terms
NSE:MOLDTKPAC vs SW, PKG, IP: 5-Year Yield-on-Cost % Comparison
For the Packaging & Containers subindustry, Mold-tek Packaging's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Mold-tek Packaging 5-Year Yield-on-Cost % vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Mold-tek Packaging's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Mold-tek Packaging's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Mold-tek Packaging (NSE:MOLDTKPAC) has a 5-Year Yield-on-Cost % of 0.61 as of Aug. 19, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Mold-tek Packaging and its competitors. This is 38% below median its historical median of 0.99. Over the past decade, Mold-tek Packaging's 5-Year Yield-on-Cost % has ranged from 0.37 to 5.57. According to the industry distribution chart, Mold-tek Packaging ranks #213 out of 242 companies in the Packaging & Containers industry, placing it in the top 88%.
Is Mold-tek Packaging's 5-Year Yield-on-Cost % too high?
Mold-tek Packaging's current 5-Year Yield-on-Cost % of 0.61 is 38% below median its 10-year median of 0.99. Over the past 10 years, this metric has ranged from a low of 0.37 to a high of 5.57. The Packaging & Containers industry median 5-Year Yield-on-Cost % is 3.04. Mold-tek Packaging's value of 0.61 is 79.9% below this industry median. Based on the distribution chart, Mold-tek Packaging ranks #213 out of 242 companies in the Packaging & Containers industry, which is in the bottom quartile relative to peers. Overall, Mold-tek Packaging has a GF Score™ of 94/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Mold-tek Packaging's 5-Year Yield-on-Cost % compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Mold-tek Packaging ranks #213 out of 242 companies for 5-Year Yield-on-Cost %. This places Mold-tek Packaging in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.04. Mold-tek Packaging's value of 0.61 is 79.9% below this benchmark. Historically, Mold-tek Packaging's own 5-Year Yield-on-Cost % has ranged from 0.37 to 5.57 over the past decade. While the company's 10-year median is 0.99 vs. the industry median of 3.04, Mold-tek Packaging has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Packaging & Containers company?
The median 5-Year Yield-on-Cost % among Packaging & Containers companies is 3.04, based on 242 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Mold-tek Packaging's current 5-Year Yield-on-Cost % of 0.61 is 79.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Mold-tek Packaging and its competitors. For the Packaging & Containers industry, the median 5-Year Yield-on-Cost % is 3.04 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Mold-tek Packaging's current 5-Year Yield-on-Cost % is 0.61, which is 38% below median its own 10-year median of 0.99. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Mold-tek Packaging stock overvalued right now?
Based on GuruFocus' analysis, Mold-tek Packaging (NSE:MOLDTKPAC) is currently considered Modestly Undervalued. The stock's GF Value™ is ₹896.03, compared to a current price of ₹678.65 — trading 24.3% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.61, which is 38% below median its 10-year median of 0.99 and 79.9% below the Packaging & Containers industry median of 3.04. Mold-tek Packaging's overall GF Score™ is 94/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Mold-tek Packaging (NSE:MOLDTKPAC), the current 5-Year Yield-on-Cost % is 0.61 as of Aug. 19, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Mold-tek Packaging (NSE:MOLDTKPAC) Overvalued in 2026?
Based on GuruFocus' analysis, Mold-tek Packaging stock appears to be undervalued.
The current stock price of ₹678.65 is trading 24.3% below its estimated GF Value™ of ₹896.03.
GuruFocus considers Mold-tek Packaging to be Modestly Undervalued.
Key valuation signals for NSE:MOLDTKPAC:
5-Year Yield-on-Cost %: 0.61 (38% below median its 10-year median of 0.99)
GF Value™: ₹896.03 vs. price of ₹678.65 (24.3% below fair value)
Industry Position: 79.9% below the Packaging & Containers median (#213 of 242)
No single metric tells the full story. See the NSE:MOLDTKPAC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Mold-tek Packaging Ltd is an Indian based company operating in the packaging container business segment. The company is engaged in the manufacturing of injection molded containers for lubes, paints, food and other products.
94GF Score
Get the complete analysis for NSE:MOLDTKPAC
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:MOLDTKPAC has been successfully added to your 
