Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Sona BLW Precision ForgingsNSE:SONACOMS -1.38%89 5-Year Yield-on-Cost % is 0.43 as of Sep. 05, 2026, which is 10% below its 10-year median of 0.48. GuruFocus rates NSE:SONACOMS with a GF Score™ of 89/100 and a GF Value™ of ₹819.16 (Fairly Valued). The stock has 6 warning signs investors should review. Among 844 Vehicles & Parts companies, Sona BLW Precision Forgings ranks worse than 90.88% on this metric.
The historical rank and industry rank for Sona BLW Precision Forgings's 5-Year Yield-on-Cost % or its related term are showing as below:
NSE:SONACOMS'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.11 Med: 0.48 Max: 0.79
Current: 0.43
During the past 8 years, Sona BLW Precision Forgings's highest Yield on Cost was 0.79. The lowest was 0.11. And the median was 0.48.
NSE:SONACOMS's 5-Year Yield-on-Cost % is ranked worse than 90.88% of 844
companies
in the Vehicles & Parts industry
Industry Median: 3.21
vs NSE:SONACOMS: 0.43
Sona BLW Precision Forgings (NSE:SONACOMS) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Sona BLW Precision Forgings 5-Year Yield-on-Cost % Related Terms
NSE:SONACOMS vs ORLY, AZO, GPC: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, Sona BLW Precision Forgings's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sona BLW Precision Forgings 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Sona BLW Precision Forgings's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Sona BLW Precision Forgings's 5-Year Yield-on-Cost % falls into.
Sona BLW Precision Forgings 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Sona BLW Precision Forgings (NSE:SONACOMS) has a 5-Year Yield-on-Cost % of 0.43 as of Sep. 05, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sona BLW Precision Forgings and its competitors. This is 10% below median its historical median of 0.48. Over the past decade, Sona BLW Precision Forgings' 5-Year Yield-on-Cost % has ranged from 0.11 to 0.79. According to the industry distribution chart, Sona BLW Precision Forgings ranks #767 out of 844 companies in the Vehicles & Parts industry, placing it in the top 90.9%.
Is Sona BLW Precision Forgings' 5-Year Yield-on-Cost % too high?
Sona BLW Precision Forgings' current 5-Year Yield-on-Cost % of 0.43 is 10% below median its 10-year median of 0.48. Over the past 10 years, this metric has ranged from a low of 0.11 to a high of 0.79. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.21. Sona BLW Precision Forgings' value of 0.43 is 86.6% below this industry median. Based on the distribution chart, Sona BLW Precision Forgings ranks #767 out of 844 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Sona BLW Precision Forgings has a GF Score™ of 89/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sona BLW Precision Forgings' 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Sona BLW Precision Forgings ranks #767 out of 844 companies for 5-Year Yield-on-Cost %. This places Sona BLW Precision Forgings in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.21. Sona BLW Precision Forgings' value of 0.43 is 86.6% below this benchmark. Historically, Sona BLW Precision Forgings' own 5-Year Yield-on-Cost % has ranged from 0.11 to 0.79 over the past decade. While the company's 10-year median is 0.48 vs. the industry median of 3.21, Sona BLW Precision Forgings has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.21, based on 844 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sona BLW Precision Forgings's current 5-Year Yield-on-Cost % of 0.43 is 86.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sona BLW Precision Forgings and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sona BLW Precision Forgings's current 5-Year Yield-on-Cost % is 0.43, which is 10% below median its own 10-year median of 0.48. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sona BLW Precision Forgings stock overvalued right now?
Based on GuruFocus' analysis, Sona BLW Precision Forgings (NSE:SONACOMS) is currently considered Fairly Valued. The stock's GF Value™ is ₹819.16, compared to a current price of ₹789.00 — trading 3.7% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.43, which is 10% below median its 10-year median of 0.48 and 86.6% below the Vehicles & Parts industry median of 3.21. Sona BLW Precision Forgings' overall GF Score™ is 89/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Sona BLW Precision Forgings (NSE:SONACOMS), the current 5-Year Yield-on-Cost % is 0.43 as of Sep. 05, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sona BLW Precision Forgings (NSE:SONACOMS) Overvalued in 2026?
Based on GuruFocus' analysis, Sona BLW Precision Forgings stock appears to be undervalued.
The current stock price of ₹789.00 is trading 3.7% below its estimated GF Value™ of ₹819.16.
GuruFocus considers Sona BLW Precision Forgings to be Fairly Valued.
Key valuation signals for NSE:SONACOMS:
5-Year Yield-on-Cost %: 0.43 (10% below median its 10-year median of 0.48)
GF Value™: ₹819.16 vs. price of ₹789.00 (3.7% below fair value)
Industry Position: 86.6% below the Vehicles & Parts median (#767 of 844)
No single metric tells the full story. See the NSE:SONACOMS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sona BLW Precision Forgings Ltd is an automotive technology company in India. It is engaged in designing, manufacturing, and supplying of engineered, mission critical, high-quality, complex, and bespoke systems and components for OEMs in electric, personalized, intelligent and connected mobility. The Company's operating business is organized and managed according to a single primary reportable business segment namely Mobility components, systems and sub-systems. Geographically, it derives a maximum of revenue from India.
89GF Score
Get the complete analysis for NSE:SONACOMS
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:SONACOMS has been successfully added to your 
