Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Chang Jia M&E EngineeringROCO:4550 57 5-Year Yield-on-Cost % is 7.25 as of Aug. 11, 2026, which is 25% below its 10-year median of 9.72. GuruFocus rates ROCO:4550 with a GF Score™ of 57/100 and a GF Value™ of NT$18.76 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 1,009 Construction companies, Chang Jia M&E Engineering ranks better than 76.81% on this metric.
The historical rank and industry rank for Chang Jia M&E Engineering's 5-Year Yield-on-Cost % or its related term are showing as below:
ROCO:4550'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 5.03 Med: 9.72 Max: 19.91
Current: 7.25
During the past 13 years, Chang Jia M&E Engineering's highest Yield on Cost was 19.91. The lowest was 5.03. And the median was 9.72.
ROCO:4550's 5-Year Yield-on-Cost % is ranked better than 76.81% of 1009
companies
in the Construction industry
Industry Median: 3.45
vs ROCO:4550: 7.25
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Chang Jia M&E Engineering 5-Year Yield-on-Cost % Related Terms
ROCO:4550 vs PWR, FIX, EME: 5-Year Yield-on-Cost % Comparison
For the Engineering & Construction subindustry, Chang Jia M&E Engineering's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chang Jia M&E Engineering 5-Year Yield-on-Cost % vs Construction Industry
For the Construction industry and Industrials sector, Chang Jia M&E Engineering's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Chang Jia M&E Engineering's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Chang Jia M&E Engineering (ROCO:4550) has a 5-Year Yield-on-Cost % of 7.25 as of Aug. 11, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Chang Jia M&E Engineering and its competitors. This is 25% below median its historical median of 9.72. Over the past decade, Chang Jia M&E Engineering's 5-Year Yield-on-Cost % has ranged from 5.03 to 19.91. According to the industry distribution chart, Chang Jia M&E Engineering ranks #234 out of 1009 companies in the Construction industry, placing it in the top 23.2%.
Is Chang Jia M&E Engineering's 5-Year Yield-on-Cost % too high?
Chang Jia M&E Engineering's current 5-Year Yield-on-Cost % of 7.25 is 25% below median its 10-year median of 9.72. Over the past 10 years, this metric has ranged from a low of 5.03 to a high of 19.91. The Construction industry median 5-Year Yield-on-Cost % is 3.45. Chang Jia M&E Engineering's value of 7.25 is 110.1% above this industry median. Based on the distribution chart, Chang Jia M&E Engineering ranks #234 out of 1009 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Chang Jia M&E Engineering has a GF Score™ of 57/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chang Jia M&E Engineering's 5-Year Yield-on-Cost % compare to PWR and FIX?
According to the Construction industry distribution chart, Chang Jia M&E Engineering ranks #234 out of 1009 companies for 5-Year Yield-on-Cost %. This places Chang Jia M&E Engineering in the top 23% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 3.45. Chang Jia M&E Engineering's value of 7.25 is 110.1% above this benchmark. Historically, Chang Jia M&E Engineering's own 5-Year Yield-on-Cost % has ranged from 5.03 to 19.91 over the past decade. While the company's 10-year median is 9.72 vs. the industry median of 3.45, Chang Jia M&E Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Construction company?
The median 5-Year Yield-on-Cost % among Construction companies is 3.45, based on 1,009 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chang Jia M&E Engineering's current 5-Year Yield-on-Cost % of 7.25 is 110.1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Chang Jia M&E Engineering and its competitors. For the Construction industry, the median 5-Year Yield-on-Cost % is 3.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chang Jia M&E Engineering's current 5-Year Yield-on-Cost % is 7.25, which is 25% below median its own 10-year median of 9.72. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chang Jia M&E Engineering stock overvalued right now?
Based on GuruFocus' analysis, Chang Jia M&E Engineering (ROCO:4550) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$18.76, compared to a current price of NT$24.40 — trading 30.1% above its estimated fair value. The current 5-Year Yield-on-Cost % is 7.25, which is 25% below median its 10-year median of 9.72 and 110.1% above the Construction industry median of 3.45. Chang Jia M&E Engineering's overall GF Score™ is 57/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Chang Jia M&E Engineering (ROCO:4550), the current 5-Year Yield-on-Cost % is 7.25 as of Aug. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chang Jia M&E Engineering (ROCO:4550) Overvalued in 2026?
Based on GuruFocus' analysis, Chang Jia M&E Engineering stock appears to be overvalued.
The current stock price of NT$24.40 is trading 30.1% above its estimated GF Value™ of NT$18.76.
GuruFocus considers Chang Jia M&E Engineering to be Modestly Overvalued.
Key valuation signals for ROCO:4550:
5-Year Yield-on-Cost %: 7.25 (25% below median its 10-year median of 9.72)
GF Value™: NT$18.76 vs. price of NT$24.40 (30.1% above fair value)
Industry Position: 110.1% above the Construction median (#234 of 1009)
No single metric tells the full story. See the ROCO:4550 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chang Jia M&E Engineering Corp is a Taiwan-based company engaged in the planning, design and engineering contracting of electrical, drainage and air conditioning equipment for various commercial buildings and factories, as well as the operation of sports centers and the import and export of the above-mentioned equipment.
57GF Score
Get the complete analysis for ROCO:4550
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:4550 has been successfully added to your 
