Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
SHSE:600444's 5-Year Yield-on-Cost % is ranked worse than 86.33% of 1002
companies
in the Construction industry
Industry Median: 3.435
vs SHSE:600444: 0.77
Sinomach General Machinery Science & Technology Co (SHSE:600444) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Sinomach General Machinery Science & Technology Co 5-Year Yield-on-Cost % Related Terms
SHSE:600444 vs TT, JCI, CARR: 5-Year Yield-on-Cost % Comparison
For the Building Products & Equipment subindustry, Sinomach General Machinery Science & Technology Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sinomach General Machinery Science & Technology Co 5-Year Yield-on-Cost % vs Construction Industry
Sinomach General Machinery Science & Technology Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Sinomach General Machinery Science & Technology Co (SHSE:600444) has a 5-Year Yield-on-Cost % of 0.77 as of Aug. 26, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sinomach General Machinery Science & Technology Co and its competitors. This is 13% above median its historical median of 0.68. Over the past decade, Sinomach General Machinery Science & Technology Co's 5-Year Yield-on-Cost % has ranged from 0.35 to 1.89. According to the industry distribution chart, Sinomach General Machinery Science & Technology Co ranks #865 out of 1002 companies in the Construction industry, placing it in the top 86.3%.
Is Sinomach General Machinery Science & Technology Co's 5-Year Yield-on-Cost % too high?
Sinomach General Machinery Science & Technology Co's current 5-Year Yield-on-Cost % of 0.77 is 13% above median its 10-year median of 0.68. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 1.89. The Construction industry median 5-Year Yield-on-Cost % is 3.44. Sinomach General Machinery Science & Technology Co's value of 0.77 is 77.6% below this industry median. Based on the distribution chart, Sinomach General Machinery Science & Technology Co ranks #865 out of 1002 companies in the Construction industry, which is in the bottom quartile relative to peers. Overall, Sinomach General Machinery Science & Technology Co has a GF Scoreâ„¢ of 68/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Sinomach General Machinery Science & Technology Co's 5-Year Yield-on-Cost % compare to TT and JCI?
According to the Construction industry distribution chart, Sinomach General Machinery Science & Technology Co ranks #865 out of 1002 companies for 5-Year Yield-on-Cost %. This places Sinomach General Machinery Science & Technology Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.44. Sinomach General Machinery Science & Technology Co's value of 0.77 is 77.6% below this benchmark. Historically, Sinomach General Machinery Science & Technology Co's own 5-Year Yield-on-Cost % has ranged from 0.35 to 1.89 over the past decade. While the company's 10-year median is 0.68 vs. the industry median of 3.44, Sinomach General Machinery Science & Technology Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Construction company?
The median 5-Year Yield-on-Cost % among Construction companies is 3.44, based on 1,002 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sinomach General Machinery Science & Technology Co's current 5-Year Yield-on-Cost % of 0.77 is 77.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Sinomach General Machinery Science & Technology Co and its competitors. For the Construction industry, the median 5-Year Yield-on-Cost % is 3.44 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sinomach General Machinery Science & Technology Co's current 5-Year Yield-on-Cost % is 0.77, which is 13% above median its own 10-year median of 0.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sinomach General Machinery Science & Technology Co stock overvalued right now?
Based on GuruFocus' analysis, Sinomach General Machinery Science & Technology Co (SHSE:600444) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥18.64, compared to a current price of ¥14.34 — trading 23.1% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.77, which is 13% above median its 10-year median of 0.68 and 77.6% below the Construction industry median of 3.44. Sinomach General Machinery Science & Technology Co's overall GF Score™ is 68/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Sinomach General Machinery Science & Technology Co (SHSE:600444), the current 5-Year Yield-on-Cost % is 0.77 as of Aug. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sinomach General Machinery Science & Technology Co (SHSE:600444) Overvalued in 2026?
Based on GuruFocus' analysis, Sinomach General Machinery Science & Technology Co stock appears to be undervalued.
The current stock price of Â¥14.34 is trading 23.1% below its estimated GF Value™ of Â¥18.64.
GuruFocus considers Sinomach General Machinery Science & Technology Co to be Modestly Undervalued.
Key valuation signals for SHSE:600444:
5-Year Yield-on-Cost %: 0.77 (13% above median its 10-year median of 0.68)
GF Value™: Â¥18.64 vs. price of Â¥14.34 (23.1% below fair value)
Industry Position: 77.6% below the Construction median (#865 of 1002)
No single metric tells the full story. See the SHSE:600444 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sinomach General Machinery Science & Technology Co Ltd is engaged in the business of fluid machinery and pipe. The main products of the fluid machinery business include refrigeration experimental equipment, sewage treatment equipment and various other non-standard fluid machinery equipment. The pipe business is mainly engaged in producing UPVC double-wall corrugated pipe, HDPE double-wall corrugated pipe, HDPE water supply pipe, HDPE gas pipe, HDPE traction pipe, HDPE ground source heat pump pipe, HDPE steel coiled pipe, HDPE steel pipe corrugated pipe, UPVC reinforced pipe, PPR hot and cold water pipe, UPVC building drain pipe, line pipe, inner rib pipe, structural wall pipe, and pipe fittings.
68GF Score
Get the complete analysis for SHSE:600444
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600444 has been successfully added to your 
