Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Yingkou Jinchen Machinery CoSHSE:603396 -2.99%86 5-Year Yield-on-Cost % is 0.43 as of Sep. 10, 2026, which is at its 10-year median of 0.43. GuruFocus rates SHSE:603396 with a GF Score™ of 86/100 and a GF Value™ of ¥30.81 (Modestly Undervalued). The stock has 7 warning signs investors should review. Among 1,871 Industrial Products companies, Yingkou Jinchen Machinery Co ranks worse than 83.38% on this metric.
The historical rank and industry rank for Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % or its related term are showing as below:
SHSE:603396'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.1 Med: 0.43 Max: 1.19
Current: 0.43
During the past 13 years, Yingkou Jinchen Machinery Co's highest Yield on Cost was 1.19. The lowest was 0.10. And the median was 0.43.
SHSE:603396's 5-Year Yield-on-Cost % is ranked worse than 83.38% of 1871
companies
in the Industrial Products industry
Industry Median: 1.92
vs SHSE:603396: 0.43
Yingkou Jinchen Machinery Co (SHSE:603396) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Yingkou Jinchen Machinery Co 5-Year Yield-on-Cost % Related Terms
SHSE:603396 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Yingkou Jinchen Machinery Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % falls into.
Yingkou Jinchen Machinery Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Yingkou Jinchen Machinery Co (SHSE:603396) has a 5-Year Yield-on-Cost % of 0.43 as of Sep. 10, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Yingkou Jinchen Machinery Co and its competitors. This is near median its historical median of 0.43. Over the past decade, Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % has ranged from 0.10 to 1.19. According to the industry distribution chart, Yingkou Jinchen Machinery Co ranks #1560 out of 1871 companies in the Industrial Products industry, placing it in the top 83.4%.
Is Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % too high?
Yingkou Jinchen Machinery Co's current 5-Year Yield-on-Cost % of 0.43 is near median its 10-year median of 0.43. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 1.19. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.92. Yingkou Jinchen Machinery Co's value of 0.43 is 77.6% below this industry median. Based on the distribution chart, Yingkou Jinchen Machinery Co ranks #1560 out of 1871 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Yingkou Jinchen Machinery Co has a GF Score™ of 86/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Yingkou Jinchen Machinery Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Yingkou Jinchen Machinery Co ranks #1560 out of 1871 companies for 5-Year Yield-on-Cost %. This places Yingkou Jinchen Machinery Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.92. Yingkou Jinchen Machinery Co's value of 0.43 is 77.6% below this benchmark. Historically, Yingkou Jinchen Machinery Co's own 5-Year Yield-on-Cost % has ranged from 0.10 to 1.19 over the past decade. While the company's 10-year median is 0.43 vs. the industry median of 1.92, Yingkou Jinchen Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.92, based on 1,871 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Yingkou Jinchen Machinery Co's current 5-Year Yield-on-Cost % of 0.43 is 77.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Yingkou Jinchen Machinery Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.92 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Yingkou Jinchen Machinery Co's current 5-Year Yield-on-Cost % is 0.43, which is near median its own 10-year median of 0.43. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Yingkou Jinchen Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Yingkou Jinchen Machinery Co (SHSE:603396) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥30.81, compared to a current price of ¥27.60 — trading 10.4% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.43, which is near median its 10-year median of 0.43 and 77.6% below the Industrial Products industry median of 1.92. Yingkou Jinchen Machinery Co's overall GF Score™ is 86/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Yingkou Jinchen Machinery Co (SHSE:603396), the current 5-Year Yield-on-Cost % is 0.43 as of Sep. 10, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Yingkou Jinchen Machinery Co (SHSE:603396) Overvalued in 2026?
Based on GuruFocus' analysis, Yingkou Jinchen Machinery Co stock appears to be undervalued.
The current stock price of ¥27.60 is trading 10.4% below its estimated GF Value™ of ¥30.81.
GuruFocus considers Yingkou Jinchen Machinery Co to be Modestly Undervalued.
Key valuation signals for SHSE:603396:
5-Year Yield-on-Cost %: 0.43 (near median its 10-year median of 0.43)
GF Value™: ¥30.81 vs. price of ¥27.60 (10.4% below fair value)
Industry Position: 77.6% below the Industrial Products median (#1560 of 1871)
No single metric tells the full story. See the SHSE:603396 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Yingkou Jinchen Machinery Co Ltd is a China-based company, engages in the supply of automated production solutions for industrial enterprises. It provides all production equipment and turnkey engineering services for lithium batteries, photovoltaic module manufacturing, and port automation. Its products include profile angle machines, solar cell module frame and angle devices, solar cell module loading and unloading manipulators, solar cell module inverting devices, solar cell sheet welding devices, packing bag conveying mechanisms, as well as solar cell module automatic production line transmission feeders and transmission feeder assemblies.
86GF Score
Get the complete analysis for SHSE:603396
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603396 has been successfully added to your 
