Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Polytec Holding AGSTU:P4N -1.98%66 5-Year Yield-on-Cost % is 3.95 as of Aug. 06, 2026, which is 22% above its 10-year median of 3.23. GuruFocus rates STU:P4N with a GF Score™ of 66/100 and a GF Value™ of €3.05 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 857 Vehicles & Parts companies, Polytec Holding AG ranks better than 58.34% on this metric.
Polytec Holding AG's yield on cost for the quarter that ended in Mar. 2026 was 3.95.
The historical rank and industry rank for Polytec Holding AG's 5-Year Yield-on-Cost % or its related term are showing as below:
STU:P4N'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.65 Med: 3.23 Max: 12.46
Current: 3.95
During the past 13 years, Polytec Holding AG's highest Yield on Cost was 12.46. The lowest was 1.65. And the median was 3.23.
STU:P4N's 5-Year Yield-on-Cost % is ranked better than 58.34% of 857
companies
in the Vehicles & Parts industry
Industry Median: 3.13
vs STU:P4N: 3.95
Polytec Holding AG (STU:P4N) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Polytec Holding AG 5-Year Yield-on-Cost % Related Terms
STU:P4N vs ORLY, AZO, GPC: 5-Year Yield-on-Cost % Comparison
For the Auto Parts subindustry, Polytec Holding AG's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Polytec Holding AG 5-Year Yield-on-Cost % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Polytec Holding AG's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Polytec Holding AG's 5-Year Yield-on-Cost % falls into.
Polytec Holding AG 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Polytec Holding AG (STU:P4N) has a 5-Year Yield-on-Cost % of 3.95 as of Aug. 06, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Polytec Holding AG and its competitors. This is 22% above median its historical median of 3.23. Over the past decade, Polytec Holding AG's 5-Year Yield-on-Cost % has ranged from 1.65 to 12.46. According to the industry distribution chart, Polytec Holding AG ranks #357 out of 857 companies in the Vehicles & Parts industry, placing it in the top 41.7%.
Is Polytec Holding AG's 5-Year Yield-on-Cost % too high?
Polytec Holding AG's current 5-Year Yield-on-Cost % of 3.95 is 22% above median its 10-year median of 3.23. Over the past 10 years, this metric has ranged from a low of 1.65 to a high of 12.46. The Vehicles & Parts industry median 5-Year Yield-on-Cost % is 3.13. Polytec Holding AG's value of 3.95 is 26.2% above this industry median. Based on the distribution chart, Polytec Holding AG ranks #357 out of 857 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Polytec Holding AG has a GF Score™ of 66/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Polytec Holding AG's 5-Year Yield-on-Cost % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Polytec Holding AG ranks #357 out of 857 companies for 5-Year Yield-on-Cost %. This puts Polytec Holding AG in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 3.13. Polytec Holding AG's value of 3.95 is 26.2% above this benchmark. Historically, Polytec Holding AG's own 5-Year Yield-on-Cost % has ranged from 1.65 to 12.46 over the past decade. While the company's 10-year median is 3.23 vs. the industry median of 3.13, Polytec Holding AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Vehicles & Parts company?
The median 5-Year Yield-on-Cost % among Vehicles & Parts companies is 3.13, based on 857 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Polytec Holding AG's current 5-Year Yield-on-Cost % of 3.95 is 26.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Polytec Holding AG and its competitors. For the Vehicles & Parts industry, the median 5-Year Yield-on-Cost % is 3.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Polytec Holding AG's current 5-Year Yield-on-Cost % is 3.95, which is 22% above median its own 10-year median of 3.23. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Polytec Holding AG stock overvalued right now?
Based on GuruFocus' analysis, Polytec Holding AG (STU:P4N) is currently considered Significantly Overvalued. The stock's GF Value™ is €3.05, compared to a current price of €4.96 — trading 62.6% above its estimated fair value. The current 5-Year Yield-on-Cost % is 3.95, which is 22% above median its 10-year median of 3.23 and 26.2% above the Vehicles & Parts industry median of 3.13. Polytec Holding AG's overall GF Score™ is 66/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Polytec Holding AG (STU:P4N), the current 5-Year Yield-on-Cost % is 3.95 as of Aug. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Polytec Holding AG (STU:P4N) Overvalued in 2026?
Based on GuruFocus' analysis, Polytec Holding AG stock appears to be overvalued.
The current stock price of €4.96 is trading 62.6% above its estimated GF Value™ of €3.05.
GuruFocus considers Polytec Holding AG to be Significantly Overvalued.
Key valuation signals for STU:P4N:
5-Year Yield-on-Cost %: 3.95 (22% above median its 10-year median of 3.23)
GF Value™: €3.05 vs. price of €4.96 (62.6% above fair value)
Industry Position: 26.2% above the Vehicles & Parts median (#357 of 857)
No single metric tells the full story. See the STU:P4N stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Polytec Holding AG is an Austria-based company focused on the automotive and plastics industry. It manufactures plastic parts globally. The operating segments are divided into four units namely Plastics, which supplies plastic components for the interior of passenger cars, engines, and the non-automotive industry. Composites provide exterior and engine parts for commercial and passenger vehicles. The car-styling unit offers accessories, small parts, and systems for vehicles, and Industrial produces plastic molded components and others. It provides service in the field of injection molding, fiber-reinforced plastics, and the manufacturer of original accessory parts made of plastic and stainless steel. Geographical presence in Austria, Austria, UK, Sweden, Hungary, and Other countries.
66GF Score
Get the complete analysis for STU:P4N
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:P4N has been successfully added to your 
