Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Basso IndustryTPE:1527 +0.15%77 5-Year Yield-on-Cost % is 6.63 as of Aug. 10, 2026, which is 17% below its 10-year median of 7.98. GuruFocus rates TPE:1527 with a GF Score™ of 77/100 and a GF Value™ of NT$34.26 (Fairly Valued). The stock has 6 warning signs investors should review. Among 1,905 Industrial Products companies, Basso Industry ranks better than 83.67% on this metric.
Basso Industry's yield on cost for the quarter that ended in Mar. 2026 was 6.63.
The historical rank and industry rank for Basso Industry's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:1527'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 3.17 Med: 7.98 Max: 15.87
Current: 6.63
During the past 13 years, Basso Industry's highest Yield on Cost was 15.87. The lowest was 3.17. And the median was 7.98.
TPE:1527's 5-Year Yield-on-Cost % is ranked better than 83.67% of 1905
companies
in the Industrial Products industry
Industry Median: 1.88
vs TPE:1527: 6.63
Basso Industry (TPE:1527) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Basso Industry 5-Year Yield-on-Cost % Related Terms
TPE:1527 vs SNA, RBC, SWK: 5-Year Yield-on-Cost % Comparison
For the Tools & Accessories subindustry, Basso Industry's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Basso Industry 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Basso Industry's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Basso Industry's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Basso Industry is calculated as
Basso Industry (TPE:1527) has a 5-Year Yield-on-Cost % of 6.63 as of Aug. 10, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Basso Industry and its competitors. This is 17% below median its historical median of 7.98. Over the past decade, Basso Industry's 5-Year Yield-on-Cost % has ranged from 3.17 to 15.87. According to the industry distribution chart, Basso Industry ranks #311 out of 1905 companies in the Industrial Products industry, placing it in the top 16.3%.
Is Basso Industry's 5-Year Yield-on-Cost % too high?
Basso Industry's current 5-Year Yield-on-Cost % of 6.63 is 17% below median its 10-year median of 7.98. Over the past 10 years, this metric has ranged from a low of 3.17 to a high of 15.87. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.88. Basso Industry's value of 6.63 is 252.7% above this industry median. Based on the distribution chart, Basso Industry ranks #311 out of 1905 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Basso Industry has a GF Score™ of 77/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Basso Industry's 5-Year Yield-on-Cost % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Basso Industry ranks #311 out of 1905 companies for 5-Year Yield-on-Cost %. This places Basso Industry in the top 16% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.88. Basso Industry's value of 6.63 is 252.7% above this benchmark. Historically, Basso Industry's own 5-Year Yield-on-Cost % has ranged from 3.17 to 15.87 over the past decade. While the company's 10-year median is 7.98 vs. the industry median of 1.88, Basso Industry has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.88, based on 1,905 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Basso Industry's current 5-Year Yield-on-Cost % of 6.63 is 252.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Basso Industry and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Basso Industry's current 5-Year Yield-on-Cost % is 6.63, which is 17% below median its own 10-year median of 7.98. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Basso Industry stock overvalued right now?
Based on GuruFocus' analysis, Basso Industry (TPE:1527) is currently considered Fairly Valued. The stock's GF Value™ is NT$34.26, compared to a current price of NT$32.65 — trading 4.7% below its estimated fair value. The current 5-Year Yield-on-Cost % is 6.63, which is 17% below median its 10-year median of 7.98 and 252.7% above the Industrial Products industry median of 1.88. Basso Industry's overall GF Score™ is 77/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Basso Industry (TPE:1527), the current 5-Year Yield-on-Cost % is 6.63 as of Aug. 10, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Basso Industry (TPE:1527) Overvalued in 2026?
Based on GuruFocus' analysis, Basso Industry stock appears to be undervalued.
The current stock price of NT$32.65 is trading 4.7% below its estimated GF Value™ of NT$34.26.
GuruFocus considers Basso Industry to be Fairly Valued.
Key valuation signals for TPE:1527:
5-Year Yield-on-Cost %: 6.63 (17% below median its 10-year median of 7.98)
GF Value™: NT$34.26 vs. price of NT$32.65 (4.7% below fair value)
Industry Position: 252.7% above the Industrial Products median (#311 of 1905)
No single metric tells the full story. See the TPE:1527 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Basso Industry Corp is a manufacturer of pneumatic fastening tools. The company produces air nailers, air impact wrenches, air ratchet wrenches, air saws, air hammers, air sanders, air drills and screwdrivers, gas nailers, air grinders, and air carton closers. Basso also offers Original Equipment Manufacturing services including design, molding and casting, machining, polishing, painting, and plastic injection services. It has one reportable segment, the pneumatic hand tool. This segment is mainly involved in manufacturing and selling nail machines and pneumatic tools, providing products, and managing relevant skills and marketing strategies. Geographically, the company operates in United States, which derives maximum revenue; Taiwan; Germany; Japan; Finland; and Others.
77GF Score
Get the complete analysis for TPE:1527
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1527 has been successfully added to your 
