Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Waida Mfg CoTSE:6158 +0.30%77 5-Year Yield-on-Cost % is 6.61 as of Aug. 14, 2026, which is 8% above its 10-year median of 6.12. GuruFocus rates TSE:6158 with a GF Score™ of 77/100 and a GF Value™ of 円830.24 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 1,898 Industrial Products companies, Waida Mfg Co ranks better than 83.83% on this metric.
Waida Mfg Co's yield on cost for the quarter that ended in Mar. 2026 was 6.61.
The historical rank and industry rank for Waida Mfg Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:6158'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.78 Med: 6.12 Max: 12.42
Current: 6.61
During the past 13 years, Waida Mfg Co's highest Yield on Cost was 12.42. The lowest was 1.78. And the median was 6.12.
TSE:6158's 5-Year Yield-on-Cost % is ranked better than 83.83% of 1898
companies
in the Industrial Products industry
Industry Median: 1.87
vs TSE:6158: 6.61
Waida Mfg Co (TSE:6158) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Waida Mfg Co 5-Year Yield-on-Cost % Related Terms
TSE:6158 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Waida Mfg Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Waida Mfg Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Waida Mfg Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Waida Mfg Co's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Waida Mfg Co is calculated as
Waida Mfg Co (TSE:6158) has a 5-Year Yield-on-Cost % of 6.61 as of Aug. 14, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Waida Mfg Co and its competitors. This is near median its historical median of 6.12. Over the past decade, Waida Mfg Co's 5-Year Yield-on-Cost % has ranged from 1.78 to 12.42. According to the industry distribution chart, Waida Mfg Co ranks #307 out of 1898 companies in the Industrial Products industry, placing it in the top 16.2%.
Is Waida Mfg Co's 5-Year Yield-on-Cost % too high?
Waida Mfg Co's current 5-Year Yield-on-Cost % of 6.61 is near median its 10-year median of 6.12. Over the past 10 years, this metric has ranged from a low of 1.78 to a high of 12.42. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.87. Waida Mfg Co's value of 6.61 is 253.5% above this industry median. Based on the distribution chart, Waida Mfg Co ranks #307 out of 1898 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Waida Mfg Co has a GF Score™ of 77/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Waida Mfg Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Waida Mfg Co ranks #307 out of 1898 companies for 5-Year Yield-on-Cost %. This places Waida Mfg Co in the top 16% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.87. Waida Mfg Co's value of 6.61 is 253.5% above this benchmark. Historically, Waida Mfg Co's own 5-Year Yield-on-Cost % has ranged from 1.78 to 12.42 over the past decade. While the company's 10-year median is 6.12 vs. the industry median of 1.87, Waida Mfg Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.87, based on 1,898 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Waida Mfg Co's current 5-Year Yield-on-Cost % of 6.61 is 253.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Waida Mfg Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Waida Mfg Co's current 5-Year Yield-on-Cost % is 6.61, which is near median its own 10-year median of 6.12. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Waida Mfg Co stock overvalued right now?
Based on GuruFocus' analysis, Waida Mfg Co (TSE:6158) is currently considered Modestly Overvalued. The stock's GF Value™ is 円830.24, compared to a current price of 円988.00 — trading 19% above its estimated fair value. The current 5-Year Yield-on-Cost % is 6.61, which is near median its 10-year median of 6.12 and 253.5% above the Industrial Products industry median of 1.87. Waida Mfg Co's overall GF Score™ is 77/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Waida Mfg Co (TSE:6158), the current 5-Year Yield-on-Cost % is 6.61 as of Aug. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Waida Mfg Co (TSE:6158) Overvalued in 2026?
Based on GuruFocus' analysis, Waida Mfg Co stock appears to be overvalued.
The current stock price of 円988.00 is trading 19% above its estimated GF Value™ of 円830.24.
GuruFocus considers Waida Mfg Co to be Modestly Overvalued.
Key valuation signals for TSE:6158:
5-Year Yield-on-Cost %: 6.61 (near median its 10-year median of 6.12)
GF Value™: 円830.24 vs. price of 円988.00 (19% above fair value)
Industry Position: 253.5% above the Industrial Products median (#307 of 1898)
No single metric tells the full story. See the TSE:6158 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Waida Mfg Co Ltd is engaged in the manufacture and sales of various machine tools, industrial machinery, measuring equipment, control equipment, and the processing and sales of mold parts, mechanical and general parts.
77GF Score
Get the complete analysis for TSE:6158
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6158 has been successfully added to your 
