Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Kanematsu Engineering CoTSE:6402 +0.80%81 5-Year Yield-on-Cost % is 0.81 as of Jul. 22, 2026, which is 19% below its 10-year median of 1.00. GuruFocus rates TSE:6402 with a GF Score™ of 81/100 and a GF Value™ of 円1,476.10 (Fairly Valued). The stock has 1 warning sign investors should review. Among 1,924 Industrial Products companies, Kanematsu Engineering Co ranks worse than 72.71% on this metric.
The historical rank and industry rank for Kanematsu Engineering Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:6402'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.58 Med: 1 Max: 1.35
Current: 0.81
During the past 13 years, Kanematsu Engineering Co's highest Yield on Cost was 1.35. The lowest was 0.58. And the median was 1.00.
TSE:6402's 5-Year Yield-on-Cost % is ranked worse than 72.71% of 1924
companies
in the Industrial Products industry
Industry Median: 1.955
vs TSE:6402: 0.81
Kanematsu Engineering Co (TSE:6402) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Kanematsu Engineering Co 5-Year Yield-on-Cost % Related Terms
TSE:6402 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Kanematsu Engineering Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kanematsu Engineering Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kanematsu Engineering Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Kanematsu Engineering Co's 5-Year Yield-on-Cost % falls into.
Kanematsu Engineering Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Kanematsu Engineering Co (TSE:6402) has a 5-Year Yield-on-Cost % of 0.81 as of Jul. 22, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kanematsu Engineering Co and its competitors. This is 19% below median its historical median of 1.00. Over the past decade, Kanematsu Engineering Co's 5-Year Yield-on-Cost % has ranged from 0.58 to 1.35. According to the industry distribution chart, Kanematsu Engineering Co ranks #1399 out of 1924 companies in the Industrial Products industry, placing it in the top 72.7%.
Is Kanematsu Engineering Co's 5-Year Yield-on-Cost % too high?
Kanematsu Engineering Co's current 5-Year Yield-on-Cost % of 0.81 is 19% below median its 10-year median of 1.00. Over the past 10 years, this metric has ranged from a low of 0.58 to a high of 1.35. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.96. Kanematsu Engineering Co's value of 0.81 is 58.6% below this industry median. Based on the distribution chart, Kanematsu Engineering Co ranks #1399 out of 1924 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Kanematsu Engineering Co has a GF Score™ of 81/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kanematsu Engineering Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Kanematsu Engineering Co ranks #1399 out of 1924 companies for 5-Year Yield-on-Cost %. This places Kanematsu Engineering Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.96. Kanematsu Engineering Co's value of 0.81 is 58.6% below this benchmark. Historically, Kanematsu Engineering Co's own 5-Year Yield-on-Cost % has ranged from 0.58 to 1.35 over the past decade. While the company's 10-year median is 1.00 vs. the industry median of 1.96, Kanematsu Engineering Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.96, based on 1,924 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kanematsu Engineering Co's current 5-Year Yield-on-Cost % of 0.81 is 58.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Kanematsu Engineering Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kanematsu Engineering Co's current 5-Year Yield-on-Cost % is 0.81, which is 19% below median its own 10-year median of 1.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kanematsu Engineering Co stock overvalued right now?
Based on GuruFocus' analysis, Kanematsu Engineering Co (TSE:6402) is currently considered Fairly Valued. The stock's GF Value™ is 円1,476.10, compared to a current price of 円1,509.00 — trading 2.2% above its estimated fair value. The current 5-Year Yield-on-Cost % is 0.81, which is 19% below median its 10-year median of 1.00 and 58.6% below the Industrial Products industry median of 1.96. Kanematsu Engineering Co's overall GF Score™ is 81/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Kanematsu Engineering Co (TSE:6402), the current 5-Year Yield-on-Cost % is 0.81 as of Jul. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kanematsu Engineering Co (TSE:6402) Overvalued in 2026?
Based on GuruFocus' analysis, Kanematsu Engineering Co stock appears to be overvalued.
The current stock price of 円1,509.00 is trading 2.2% above its estimated GF Value™ of 円1,476.10.
GuruFocus considers Kanematsu Engineering Co to be Fairly Valued.
Key valuation signals for TSE:6402:
5-Year Yield-on-Cost %: 0.81 (19% below median its 10-year median of 1.00)
GF Value™: 円1,476.10 vs. price of 円1,509.00 (2.2% above fair value)
Industry Position: 58.6% below the Industrial Products median (#1399 of 1924)
No single metric tells the full story. See the TSE:6402 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kanematsu Engineering Co Ltd offers specialty vehicles. Its principal products include high-power suction trucks, stationary suction machine, high-pressure cleaning trucks, powder suction and pressure delivery trucks and dredge system. It's products used by industrial waste disposer, iron and steel industry, electric power company, shipbuilding company, and overseas users.
81GF Score
Get the complete analysis for TSE:6402
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6402 has been successfully added to your 
