Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Master Tec Group BhdXKLS:0295 -0.51%42 5-Year Yield-on-Cost % is 1.71 as of Jul. 26, 2026, which is 92% above its 10-year median of 0.89. GuruFocus rates XKLS:0295 with a GF Score™ of 42/100. The stock has 2 warning signs investors should review. Among 1,922 Industrial Products companies, Master Tec Group Bhd ranks worse than 53.8% on this metric.
Master Tec Group Bhd's yield on cost for the quarter that ended in Mar. 2026 was 1.71.
The historical rank and industry rank for Master Tec Group Bhd's 5-Year Yield-on-Cost % or its related term are showing as below:
XKLS:0295'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.51 Med: 0.89 Max: 1.74
Current: 1.71
During the past 6 years, Master Tec Group Bhd's highest Yield on Cost was 1.74. The lowest was 0.51. And the median was 0.89.
XKLS:0295's 5-Year Yield-on-Cost % is ranked worse than 53.8% of 1922
companies
in the Industrial Products industry
Industry Median: 1.94
vs XKLS:0295: 1.71
Master Tec Group Bhd (XKLS:0295) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Master Tec Group Bhd 5-Year Yield-on-Cost % Related Terms
XKLS:0295 vs VRT, BE: 5-Year Yield-on-Cost % Comparison
For the Electrical Equipment & Parts subindustry, Master Tec Group Bhd's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Master Tec Group Bhd 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Master Tec Group Bhd's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Master Tec Group Bhd's 5-Year Yield-on-Cost % falls into.
Master Tec Group Bhd 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Master Tec Group Bhd (XKLS:0295) has a 5-Year Yield-on-Cost % of 1.71 as of Jul. 26, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Master Tec Group Bhd and its competitors. This is 92% above median its historical median of 0.89. Over the past decade, Master Tec Group Bhd's 5-Year Yield-on-Cost % has ranged from 0.51 to 1.74. According to the industry distribution chart, Master Tec Group Bhd ranks #1034 out of 1922 companies in the Industrial Products industry, placing it in the top 53.8%.
Is Master Tec Group Bhd's 5-Year Yield-on-Cost % too high?
Master Tec Group Bhd's current 5-Year Yield-on-Cost % of 1.71 is 92% above median its 10-year median of 0.89. Over the past 10 years, this metric has ranged from a low of 0.51 to a high of 1.74. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.94. Master Tec Group Bhd's value of 1.71 is 11.9% below this industry median. Based on the distribution chart, Master Tec Group Bhd ranks #1034 out of 1922 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Master Tec Group Bhd has a GF Score™ of 42/100, reflecting its overall financial health beyond just this single metric.
How does Master Tec Group Bhd's 5-Year Yield-on-Cost % compare to VRT and BE?
According to the Industrial Products industry distribution chart, Master Tec Group Bhd ranks #1034 out of 1922 companies for 5-Year Yield-on-Cost %. This places Master Tec Group Bhd in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.94. Master Tec Group Bhd's value of 1.71 is 11.9% below this benchmark. Historically, Master Tec Group Bhd's own 5-Year Yield-on-Cost % has ranged from 0.51 to 1.74 over the past decade. While the company's 10-year median is 0.89 vs. the industry median of 1.94, Master Tec Group Bhd has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.94, based on 1,922 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Master Tec Group Bhd's current 5-Year Yield-on-Cost % of 1.71 is 11.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Master Tec Group Bhd and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.94 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Master Tec Group Bhd's current 5-Year Yield-on-Cost % is 1.71, which is 92% above median its own 10-year median of 0.89. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Master Tec Group Bhd stock overvalued right now?
Master Tec Group Bhd (XKLS:0295) has a current 5-Year Yield-on-Cost % of 1.71. The current 5-Year Yield-on-Cost % is 1.71, which is 92% above median its 10-year median of 0.89 and 11.9% below the Industrial Products industry median of 1.94. Master Tec Group Bhd's overall GF Score™ is 42/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Master Tec Group Bhd (XKLS:0295), the current 5-Year Yield-on-Cost % is 1.71 as of Jul. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Master Tec Group Bhd is an investment holding company. Through its subsidiary, the company is involved in the manufacturing and distribution of power cables, housing cables, control cables, instrumentation and communication cables, fire-resistant and flame-retardant cables, conductors, branch cables, and fibre optic cables. These products are supplied to customers across various industries in both the domestic market and selected Asia-Pacific markets, including Thailand, Brunei, and Singapore, for applications in power utilities, renewable energy (solar), property development and construction, industrial and manufacturing sectors, infrastructure, public transportation, oil and gas, data centres, and telecommunications.
42GF Score
Get the complete analysis for XKLS:0295
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:0295 has been successfully added to your 
