Kabra ExtrusiontechnikBOM:524109 -2.20%70 Dividend Yield % is 0.92% as of Jul. 06, 2026, which is 23% below its 10-year median of 1.20. GuruFocus rates BOM:524109 with a GF Score™ of 70/100 and a GF Value™ of ₹267.97 (Fairly Valued). The stock has 4 warning signs investors should review. Among 1,925 Industrial Products companies, Kabra Extrusiontechnik ranks worse than 62.13% on this metric.
As of today (2026-07-06), the Trailing Annual Dividend Yield of Kabra Extrusiontechnik is 0.92%.
Warning Sign:
Kabra Extrusiontechnik Ltd stock Dividend Yield % is close to 1-year low.
The historical rank and industry rank for Kabra Extrusiontechnik's Dividend Yield % or its related term are showing as below:
BOM:524109'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.47 Med: 1.2 Max: 4.39
Current: 0.92
During the past 13 years, the highest Dividend Yield of Kabra Extrusiontechnik was 4.39%. The lowest was 0.47%. And the median was 1.20%.
BOM:524109's Dividend Yield % is ranked worse than 62.13% of 1925
companies
in the Industrial Products industry
Industry Median: 1.41
vs BOM:524109: 0.92
During the past 12 months, Kabra Extrusiontechnik's average Dividends Per Share Growth Rate was -28.60% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -5.90% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Kabra Extrusiontechnik was 62.00% per year. The lowest was -22.20% per year. And the median was 7.70% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
Kabra Extrusiontechnik Dividend Yield % Related Terms
Kabra Extrusiontechnik Dividend Yield % Historical Data
* Premium members only.
The historical data trend for Kabra Extrusiontechnik's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:524109 vs GEV, ETN, PH: Dividend Yield % Comparison
For the Specialty Industrial Machinery subindustry, Kabra Extrusiontechnik's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kabra Extrusiontechnik Dividend Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Kabra Extrusiontechnik's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Kabra Extrusiontechnik's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Kabra Extrusiontechnik Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
INR 2.500000
2025-07-09
2025-07-10
2025-07-19
Cash Dividend
annually
INR:INR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kabra Extrusiontechnik (BOM:524109) has a Dividend Yield % of 0.92% as of Jul. 06, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Kabra Extrusiontechnik and its competitors. This is 23% below median its historical median of 1.20. Over the past decade, Kabra Extrusiontechnik's Dividend Yield % has ranged from 0.47 to 4.39. According to the industry distribution chart, Kabra Extrusiontechnik ranks #1196 out of 1925 companies in the Industrial Products industry, placing it in the top 62.1%.
Is Kabra Extrusiontechnik's Dividend Yield % too high?
Kabra Extrusiontechnik's current Dividend Yield % of 0.92% is 23% below median its 10-year median of 1.20. Over the past 10 years, this metric has ranged from a low of 0.47 to a high of 4.39. The Industrial Products industry median Dividend Yield % is 1.41. Kabra Extrusiontechnik's value of 0.92% is 34.8% below this industry median. Based on the distribution chart, Kabra Extrusiontechnik ranks #1196 out of 1925 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Kabra Extrusiontechnik has a GF Score™ of 70/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Kabra Extrusiontechnik's Dividend Yield % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Kabra Extrusiontechnik ranks #1196 out of 1925 companies for Dividend Yield %. This places Kabra Extrusiontechnik in the lower half of its industry. The industry median Dividend Yield % is 1.41. Kabra Extrusiontechnik's value of 0.92% is 34.8% below this benchmark. Historically, Kabra Extrusiontechnik's own Dividend Yield % has ranged from 0.47 to 4.39 over the past decade. While the company's 10-year median is 1.20 vs. the industry median of 1.41, Kabra Extrusiontechnik has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for an Industrial Products company?
The median Dividend Yield % among Industrial Products companies is 1.41, based on 1,925 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kabra Extrusiontechnik's current Dividend Yield % of 0.92% is 34.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Kabra Extrusiontechnik and its competitors. For the Industrial Products industry, the median Dividend Yield % is 1.41 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kabra Extrusiontechnik's current Dividend Yield % is 0.92%, which is 23% below median its own 10-year median of 1.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kabra Extrusiontechnik stock overvalued right now?
Based on GuruFocus' analysis, Kabra Extrusiontechnik (BOM:524109) is currently considered Fairly Valued. The stock's GF Value™ is ₹267.97, compared to a current price of ₹273.00 — trading 1.9% above its estimated fair value. The current Dividend Yield % is 0.92%, which is 23% below median its 10-year median of 1.20 and 34.8% below the Industrial Products industry median of 1.41. Kabra Extrusiontechnik's overall GF Score™ is 70/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Kabra Extrusiontechnik (BOM:524109), the current Dividend Yield % is 0.92% as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kabra Extrusiontechnik (BOM:524109) Overvalued in 2026?
Based on GuruFocus' analysis, Kabra Extrusiontechnik stock appears to be overvalued.
The current stock price of ₹273.00 is trading 1.9% above its estimated GF Value™ of ₹267.97.
GuruFocus considers Kabra Extrusiontechnik to be Fairly Valued.
Key valuation signals for BOM:524109:
Dividend Yield %: 0.92% (23% below median its 10-year median of 1.20)
GF Value™: ₹267.97 vs. price of ₹273.00 (1.9% above fair value)
Industry Position: 34.8% below the Industrial Products median (#1196 of 1925)
No single metric tells the full story. See the BOM:524109 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kabra Extrusiontechnik Ltd is a manufacturer of extrusion plants. The group specializes in providing plastic extrusion machinery for manufacturing pipes and films. The company operates in two segments, namely Extrusion Machinery and Battery Division. The company's products include Pipe Extrusion Lines, Blown Film Lines, Sheet Extrusion Line, Auto Feeding Systems, and others. The company generates maximum revenue from the Extrusion Machinery segment.
70GF Score
Get the complete analysis for BOM:524109
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:524109 has been successfully added to your 
