AcerinoxCHIX:ACXE -2.97%71 Dividend Yield % is 3.92% as of Jun. 25, 2026, which is 25% below its 10-year median of 5.24. GuruFocus rates CHIX:ACXE with a GF Score™ of 71/100 and a GF Value™ of €10.35 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 317 Steel companies, Acerinox ranks better than 65.93% on this metric.
As of today (2026-06-25), the Trailing Annual Dividend Yield of Acerinox is 3.92%.
Warning Sign:
Acerinox SA stock Dividend Yield % is close to 2-year low.
The historical rank and industry rank for Acerinox's Dividend Yield % or its related term are showing as below:
CHIX:ACXe'
s Dividend Yield % Range Over the Past 10 Years
Min: 2.71 Med: 5.24 Max: 10.14
Current: 3.92
During the past 13 years, the highest Dividend Yield of Acerinox was 10.14%. The lowest was 2.71%. And the median was 5.24%.
CHIX:ACXe's Dividend Yield % is ranked better than 65.93% of 317
companies
in the Steel industry
Industry Median: 2.75
vs CHIX:ACXe: 3.92
During the past 3 years, the average Dividends Per Share Growth Rate was 7.40% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 7.30% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 3.90% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Acerinox was 21.60% per year. The lowest was -8.00% per year. And the median was 0.60% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Acerinox (CHIX:ACXe) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
The historical data trend for Acerinox's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
CHIX:ACXE vs NUE, STLD, RS: Dividend Yield % Comparison
For the Steel subindustry, Acerinox's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Acerinox Dividend Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, Acerinox's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Acerinox's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Acerinox Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
EUR 0.310000
2026-01-21
2026-01-22
2026-01-23
Cash Dividend
semi-annually
EUR:EUR 1.000000
EUR 0.310000
2025-07-16
2025-07-17
2025-07-18
Cash Dividend
semi-annually
EUR:EUR 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
Acerinox's Trailing Annual Dividend Yield (%) for Today is calculated as
Trailing Annual Dividend Yield
=
Most Recent Full Year Dividend
/
Current Share Price
=
0.62
/
15.83
=
3.92 %
Current Share Price is €15.83. Acerinox's Dividends per Share for the trailing twelve months (TTM) ended in Today is €0.62.
Acerinox's Forward Annual Dividend Yield (%) for Today is calculated as
Forward Annual Dividend Yield
=
Forward Full Year Dividend
/
Current Share Price
=
0.62
/
15.83
=
3.92 %
Current Share Price is €15.83. Acerinox's Dividends per Share for the forward twelve months is calculated as €0.31 * 2 = €0.62.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Acerinox (CHIX:ACXE) has a Dividend Yield % of 3.92% as of Jun. 25, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Acerinox and its competitors. This is 25% below median its historical median of 5.24. Over the past decade, Acerinox's Dividend Yield % has ranged from 2.71 to 10.14. According to the industry distribution chart, Acerinox ranks #108 out of 317 companies in the Steel industry, placing it in the top 34.1%.
Is Acerinox's Dividend Yield % too high?
Acerinox's current Dividend Yield % of 3.92% is 25% below median its 10-year median of 5.24. Over the past 10 years, this metric has ranged from a low of 2.71 to a high of 10.14. The Steel industry median Dividend Yield % is 2.75. Acerinox's value of 3.92% is 42.5% above this industry median. Based on the distribution chart, Acerinox ranks #108 out of 317 companies in the Steel industry, which is above the industry midpoint. Overall, Acerinox has a GF Score™ of 71/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Acerinox's Dividend Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, Acerinox ranks #108 out of 317 companies for Dividend Yield %. This puts Acerinox in the upper half of its industry. The industry median Dividend Yield % is 2.75. Acerinox's value of 3.92% is 42.5% above this benchmark. Historically, Acerinox's own Dividend Yield % has ranged from 2.71 to 10.14 over the past decade. While the company's 10-year median is 5.24 vs. the industry median of 2.75, Acerinox has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Steel company?
The median Dividend Yield % among Steel companies is 2.75, based on 317 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Acerinox's current Dividend Yield % of 3.92% is 42.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Acerinox and its competitors. For the Steel industry, the median Dividend Yield % is 2.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Acerinox's current Dividend Yield % is 3.92%, which is 25% below median its own 10-year median of 5.24. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Acerinox stock overvalued right now?
Based on GuruFocus' analysis, Acerinox (CHIX:ACXE) is currently considered Significantly Overvalued. The stock's GF Value™ is €10.35, compared to a current price of €15.83 — trading 52.9% above its estimated fair value. The current Dividend Yield % is 3.92%, which is 25% below median its 10-year median of 5.24 and 42.5% above the Steel industry median of 2.75. Acerinox's overall GF Score™ is 71/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Acerinox (CHIX:ACXE), the current Dividend Yield % is 3.92% as of Jun. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Acerinox (CHIX:ACXE) Overvalued in 2026?
Based on GuruFocus' analysis, Acerinox stock appears to be overvalued.
The current stock price of €15.83 is trading 52.9% above its estimated GF Value™ of €10.35.
GuruFocus considers Acerinox to be Significantly Overvalued.
Key valuation signals for CHIX:ACXE:
Dividend Yield %: 3.92% (25% below median its 10-year median of 5.24)
GF Value™: €10.35 vs. price of €15.83 (52.9% above fair value)
Industry Position: 42.5% above the Steel median (#108 of 317)
No single metric tells the full story. See the CHIX:ACXE stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Acerinox SA is a Spain-based stainless steel maker engaged in the manufacture, processing, and marketing of stainless steel products and special alloys. The company operates in two segments; the Stainless steel segment which accounts for the majority of the company's revenue, includes both flat and long stainless steel products, and the High-performance alloys segment includes special alloys with high nickel content. This segment includes all the companies in the VDM Metals subgroup. Geographically, the company operates in Spain, the Rest of Europe, America, Africa, Asia, and Others.
71GF Score
Get the complete analysis for CHIX:ACXE
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
CHIX:ACXE has been successfully added to your 
