Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
HG Metal ManufacturingSGX:BTG 44 Dividend Yield % is 3.06% as of Aug. 03, 2026, which is 69% below its 10-year median of 10.00. GuruFocus rates SGX:BTG with a GF Score™ of 44/100 and a GF Value™ of S$0.17 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 315 Steel companies, HG Metal Manufacturing ranks better than 54.6% on this metric.
As of today (2026-08-03), the Trailing Annual Dividend Yield of HG Metal Manufacturing is 3.06%.
Warning Sign:
HG Metal Manufacturing Ltd stock Dividend Yield % is close to 3-year low.
The historical rank and industry rank for HG Metal Manufacturing's Dividend Yield % or its related term are showing as below:
SGX:BTG'
s Dividend Yield % Range Over the Past 10 Years
Min: 1.14 Med: 10 Max: 41.51
Current: 3.06
During the past 13 years, the highest Dividend Yield of HG Metal Manufacturing was 41.51%. The lowest was 1.14%. And the median was 10.00%.
SGX:BTG's Dividend Yield % is ranked better than 54.6% of 315
companies
in the Steel industry
Industry Median: 2.82
vs SGX:BTG: 3.06
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of HG Metal Manufacturing was 122.40% per year. The lowest was -37.00% per year. And the median was 0.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
HG Metal Manufacturing (SGX:BTG) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
HG Metal Manufacturing Dividend Yield % Related Terms
HG Metal Manufacturing Dividend Yield % Historical Data
* Premium members only.
The historical data trend for HG Metal Manufacturing's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SGX:BTG vs NUE, STLD, RS: Dividend Yield % Comparison
For the Steel subindustry, HG Metal Manufacturing's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
HG Metal Manufacturing Dividend Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, HG Metal Manufacturing's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where HG Metal Manufacturing's Dividend Yield % falls into.
HG Metal Manufacturing Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
HG Metal Manufacturing Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
SGD 0.015000
2026-02-05
2026-02-06
2026-02-27
Cash Dividend
annually
SGD:SGD 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
HG Metal Manufacturing (SGX:BTG) has a Dividend Yield % of 3.06% as of Aug. 03, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on HG Metal Manufacturing and its competitors. This is 69% below median its historical median of 10.00. Over the past decade, HG Metal Manufacturing's Dividend Yield % has ranged from 1.14 to 41.51. According to the industry distribution chart, HG Metal Manufacturing ranks #143 out of 315 companies in the Steel industry, placing it in the top 45.4%.
Is HG Metal Manufacturing's Dividend Yield % too high?
HG Metal Manufacturing's current Dividend Yield % of 3.06% is 69% below median its 10-year median of 10.00. Over the past 10 years, this metric has ranged from a low of 1.14 to a high of 41.51. The Steel industry median Dividend Yield % is 2.82. HG Metal Manufacturing's value of 3.06% is 8.5% above this industry median. Based on the distribution chart, HG Metal Manufacturing ranks #143 out of 315 companies in the Steel industry, which is above the industry midpoint. Overall, HG Metal Manufacturing has a GF Score™ of 44/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does HG Metal Manufacturing's Dividend Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, HG Metal Manufacturing ranks #143 out of 315 companies for Dividend Yield %. This puts HG Metal Manufacturing in the upper half of its industry. The industry median Dividend Yield % is 2.82. HG Metal Manufacturing's value of 3.06% is 8.5% above this benchmark. Historically, HG Metal Manufacturing's own Dividend Yield % has ranged from 1.14 to 41.51 over the past decade. While the company's 10-year median is 10.00 vs. the industry median of 2.82, HG Metal Manufacturing has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Steel company?
The median Dividend Yield % among Steel companies is 2.82, based on 315 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. HG Metal Manufacturing's current Dividend Yield % of 3.06% is 8.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on HG Metal Manufacturing and its competitors. For the Steel industry, the median Dividend Yield % is 2.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. HG Metal Manufacturing's current Dividend Yield % is 3.06%, which is 69% below median its own 10-year median of 10.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is HG Metal Manufacturing stock overvalued right now?
Based on GuruFocus' analysis, HG Metal Manufacturing (SGX:BTG) is currently considered Significantly Overvalued. The stock's GF Value™ is S$0.17, compared to a current price of S$0.49 — trading 188.2% above its estimated fair value. The current Dividend Yield % is 3.06%, which is 69% below median its 10-year median of 10.00 and 8.5% above the Steel industry median of 2.82. HG Metal Manufacturing's overall GF Score™ is 44/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For HG Metal Manufacturing (SGX:BTG), the current Dividend Yield % is 3.06% as of Aug. 03, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is HG Metal Manufacturing (SGX:BTG) Overvalued in 2026?
Based on GuruFocus' analysis, HG Metal Manufacturing stock appears to be overvalued.
The current stock price of S$0.49 is trading 188.2% above its estimated GF Value™ of S$0.17.
GuruFocus considers HG Metal Manufacturing to be Significantly Overvalued.
Key valuation signals for SGX:BTG:
Dividend Yield %: 3.06% (69% below median its 10-year median of 10.00)
GF Value™: S$0.17 vs. price of S$0.49 (188.2% above fair value)
Industry Position: 8.5% above the Steel median (#143 of 315)
No single metric tells the full story. See the SGX:BTG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
HG Metal Manufacturing Ltd is involved in the steel business. The Company operates through business units including HG Distribution, HG Construction Steel, HG Coupler, and Thread. Its operating segments comprise the Trading segment, the Manufacturing segment, and Others. The Trading segment supplies steel products and includes investments in subsidiaries engaged in steel distribution and the provision of industrial steel services. The Manufacturing segment produces construction steel products and provides related engineering services. The Others segment includes activities that do not fall under the Trading or Manufacturing segments. The majority of the Company's revenue is generated from the Manufacturing segment, with the maximum of its revenue derived from Singapore.
44GF Score
Get the complete analysis for SGX:BTG
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:BTG has been successfully added to your 
