OKE Precision Cutting Tools CoSHSE:688308 -5.79%68 Dividend Yield % is 0.08% as of Jun. 29, 2026, which is 93% below its 10-year median of 1.18. GuruFocus rates SHSE:688308 with a GF Score™ of 68/100 and a GF Value™ of ¥44.37 (Significantly Overvalued). The stock has 10 warning signs investors should review. Among 1,927 Industrial Products companies, OKE Precision Cutting Tools Co ranks worse than 97.25% on this metric.
OKE Precision Cutting Tools Co Ltd stock Dividend Yield % is close to 5-year low.
The historical rank and industry rank for OKE Precision Cutting Tools Co's Dividend Yield % or its related term are showing as below:
SHSE:688308'
s Dividend Yield % Range Over the Past 10 Years
Min: 0.08 Med: 1.18 Max: 3.85
Current: 0.08
During the past 9 years, the highest Dividend Yield of OKE Precision Cutting Tools Co was 3.85%. The lowest was 0.08%. And the median was 1.18%.
SHSE:688308's Dividend Yield % is ranked worse than 97.25% of 1927
companies
in the Industrial Products industry
Industry Median: 1.43
vs SHSE:688308: 0.08
During the past 12 months, OKE Precision Cutting Tools Co's average Dividends Per Share Growth Rate was -57.10% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was -33.10% per year.
During the past 9 years, the highest 3-Year average Dividends Per Share Growth Rate of OKE Precision Cutting Tools Co was 14.00% per year. The lowest was -33.10% per year. And the median was -9.55% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
OKE Precision Cutting Tools Co (SHSE:688308) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
OKE Precision Cutting Tools Co Dividend Yield % Chart
SHSE:688308 vs SNA, RBC, LECO: Dividend Yield % Comparison
For the Tools & Accessories subindustry, OKE Precision Cutting Tools Co's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
OKE Precision Cutting Tools Co Dividend Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, OKE Precision Cutting Tools Co's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where OKE Precision Cutting Tools Co's Dividend Yield % falls into.
OKE Precision Cutting Tools Co Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
OKE Precision Cutting Tools Co Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
CNY 0.150000
2025-07-17
2025-07-16
2025-07-17
Cash Dividend
annually
CNY:CNY 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
OKE Precision Cutting Tools Co (SHSE:688308) has a Dividend Yield % of 0.08% as of Jun. 29, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on OKE Precision Cutting Tools Co and its competitors. This is 93% below median its historical median of 1.18. Over the past decade, OKE Precision Cutting Tools Co's Dividend Yield % has ranged from 0.08 to 3.85. According to the industry distribution chart, OKE Precision Cutting Tools Co ranks #1874 out of 1927 companies in the Industrial Products industry, placing it in the top 97.2%.
Is OKE Precision Cutting Tools Co's Dividend Yield % too high?
OKE Precision Cutting Tools Co's current Dividend Yield % of 0.08% is 93% below median its 10-year median of 1.18. Over the past 10 years, this metric has ranged from a low of 0.08 to a high of 3.85. The Industrial Products industry median Dividend Yield % is 1.43. OKE Precision Cutting Tools Co's value of 0.08% is 94.4% below this industry median. Based on the distribution chart, OKE Precision Cutting Tools Co ranks #1874 out of 1927 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, OKE Precision Cutting Tools Co has a GF Score™ of 68/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does OKE Precision Cutting Tools Co's Dividend Yield % compare to SNA and RBC?
According to the Industrial Products industry distribution chart, OKE Precision Cutting Tools Co ranks #1874 out of 1927 companies for Dividend Yield %. This places OKE Precision Cutting Tools Co in the lower half of its industry. The industry median Dividend Yield % is 1.43. OKE Precision Cutting Tools Co's value of 0.08% is 94.4% below this benchmark. Historically, OKE Precision Cutting Tools Co's own Dividend Yield % has ranged from 0.08 to 3.85 over the past decade. While the company's 10-year median is 1.18 vs. the industry median of 1.43, OKE Precision Cutting Tools Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for an Industrial Products company?
The median Dividend Yield % among Industrial Products companies is 1.43, based on 1,927 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. OKE Precision Cutting Tools Co's current Dividend Yield % of 0.08% is 94.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on OKE Precision Cutting Tools Co and its competitors. For the Industrial Products industry, the median Dividend Yield % is 1.43 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. OKE Precision Cutting Tools Co's current Dividend Yield % is 0.08%, which is 93% below median its own 10-year median of 1.18. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is OKE Precision Cutting Tools Co stock overvalued right now?
Based on GuruFocus' analysis, OKE Precision Cutting Tools Co (SHSE:688308) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥44.37, compared to a current price of ¥176.80 — trading 298.5% above its estimated fair value. The current Dividend Yield % is 0.08%, which is 93% below median its 10-year median of 1.18 and 94.4% below the Industrial Products industry median of 1.43. OKE Precision Cutting Tools Co's overall GF Score™ is 68/100 with 10 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For OKE Precision Cutting Tools Co (SHSE:688308), the current Dividend Yield % is 0.08% as of Jun. 29, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is OKE Precision Cutting Tools Co (SHSE:688308) Overvalued in 2026?
Based on GuruFocus' analysis, OKE Precision Cutting Tools Co stock appears to be overvalued.
The current stock price of ¥176.80 is trading 298.5% above its estimated GF Value™ of ¥44.37.
GuruFocus considers OKE Precision Cutting Tools Co to be Significantly Overvalued.
Key valuation signals for SHSE:688308:
Dividend Yield %: 0.08% (93% below median its 10-year median of 1.18)
GF Value™: ¥44.37 vs. price of ¥176.80 (298.5% above fair value)
Industry Position: 94.4% below the Industrial Products median (#1874 of 1927)
No single metric tells the full story. See the SHSE:688308 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
OKE Precision Cutting Tools Co Business Description
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688308 has been successfully added to your 
