KurimotoTSE:5602 -0.07%80 Dividend Yield % is 4.14% as of Jun. 26, 2026, which is 20% above its 10-year median of 3.46. GuruFocus rates TSE:5602 with a GF Score™ of 80/100 and a GF Value™ of 円906.95 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 316 Steel companies, Kurimoto ranks better than 69.94% on this metric.
As of today (2026-06-26), the Trailing Annual Dividend Yield of Kurimoto is 4.14%.
Good Sign:
Kurimoto Ltd stock Dividend Yield % is close to 1-year high.
The historical rank and industry rank for Kurimoto's Dividend Yield % or its related term are showing as below:
TSE:5602'
s Dividend Yield % Range Over the Past 10 Years
Min: 1.2 Med: 3.46 Max: 5.99
Current: 4.14
During the past 13 years, the highest Dividend Yield of Kurimoto was 5.99%. The lowest was 1.20%. And the median was 3.46%.
TSE:5602's Dividend Yield % is ranked better than 69.94% of 316
companies
in the Steel industry
Industry Median: 2.745
vs TSE:5602: 4.14
During the past 12 months, Kurimoto's average Dividends Per Share Growth Rate was 1.10% per year.
During the past 3 years, the average Dividends Per Share Growth Rate was 47.40% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 43.70% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 21.00% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Kurimoto was 59.70% per year. The lowest was 0.00% per year. And the median was 14.50% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Kurimoto (TSE:5602) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
The historical data trend for Kurimoto's Dividend Yield % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:5602 vs NUE, STLD, RS: Dividend Yield % Comparison
For the Steel subindustry, Kurimoto's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Kurimoto Dividend Yield % vs Steel Industry
For the Steel industry and Basic Materials sector, Kurimoto's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Kurimoto's Dividend Yield % falls into.
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Kurimoto Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
JPY 28.800000
2026-03-30
2026-03-31
2026-06-26
Cash Dividend
semi-annually
JPY:JPY 1.000000
JPY 28.800000
2025-09-29
2025-09-30
2025-12-01
Cash Dividend
semi-annually
JPY:JPY 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
Kurimoto's Trailing Annual Dividend Yield (%) for Today is calculated as
Trailing Annual Dividend Yield
=
Most Recent Full Year Dividend
/
Current Share Price
=
57.6
/
1392.00
=
4.14 %
Current Share Price is 円1392.00. Kurimoto's Dividends per Share for the trailing twelve months (TTM) ended in Today is 円57.6.
Kurimoto's Forward Annual Dividend Yield (%) for Today is calculated as
Forward Annual Dividend Yield
=
Forward Full Year Dividend
/
Current Share Price
=
57.6
/
1392.00
=
4.14 %
Current Share Price is 円1392.00. Kurimoto's Dividends per Share for the forward twelve months is calculated as 円28.8 * 2 = 円57.6.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Kurimoto (TSE:5602) has a Dividend Yield % of 4.14% as of Jun. 26, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Kurimoto and its competitors. This is 20% above median its historical median of 3.46. Over the past decade, Kurimoto's Dividend Yield % has ranged from 1.20 to 5.99. According to the industry distribution chart, Kurimoto ranks #95 out of 316 companies in the Steel industry, placing it in the top 30.1%.
Is Kurimoto's Dividend Yield % too high?
Kurimoto's current Dividend Yield % of 4.14% is 20% above median its 10-year median of 3.46. Over the past 10 years, this metric has ranged from a low of 1.20 to a high of 5.99. The Steel industry median Dividend Yield % is 2.75. Kurimoto's value of 4.14% is 50.8% above this industry median. Based on the distribution chart, Kurimoto ranks #95 out of 316 companies in the Steel industry, which is above the industry midpoint. Overall, Kurimoto has a GF Score™ of 80/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Kurimoto's Dividend Yield % compare to NUE and STLD?
According to the Steel industry distribution chart, Kurimoto ranks #95 out of 316 companies for Dividend Yield %. This puts Kurimoto in the upper half of its industry. The industry median Dividend Yield % is 2.75. Kurimoto's value of 4.14% is 50.8% above this benchmark. Historically, Kurimoto's own Dividend Yield % has ranged from 1.20 to 5.99 over the past decade. While the company's 10-year median is 3.46 vs. the industry median of 2.75, Kurimoto has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for a Steel company?
The median Dividend Yield % among Steel companies is 2.75, based on 316 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Kurimoto's current Dividend Yield % of 4.14% is 50.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Kurimoto and its competitors. For the Steel industry, the median Dividend Yield % is 2.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Kurimoto's current Dividend Yield % is 4.14%, which is 20% above median its own 10-year median of 3.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Kurimoto stock overvalued right now?
Based on GuruFocus' analysis, Kurimoto (TSE:5602) is currently considered Significantly Overvalued. The stock's GF Value™ is 円906.95, compared to a current price of 円1,392.00 — trading 53.5% above its estimated fair value. The current Dividend Yield % is 4.14%, which is 20% above median its 10-year median of 3.46 and 50.8% above the Steel industry median of 2.75. Kurimoto's overall GF Score™ is 80/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Kurimoto (TSE:5602), the current Dividend Yield % is 4.14% as of Jun. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Kurimoto (TSE:5602) Overvalued in 2026?
Based on GuruFocus' analysis, Kurimoto stock appears to be overvalued.
The current stock price of 円1,392.00 is trading 53.5% above its estimated GF Value™ of 円906.95.
GuruFocus considers Kurimoto to be Significantly Overvalued.
Key valuation signals for TSE:5602:
Dividend Yield %: 4.14% (20% above median its 10-year median of 3.46)
GF Value™: 円906.95 vs. price of 円1,392.00 (53.5% above fair value)
Industry Position: 50.8% above the Steel median (#95 of 316)
No single metric tells the full story. See the TSE:5602 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Kurimoto Ltd engages in the business of ductile iron pipes and construction materials. The Pipe System products include ductile iron pipes, fittings, accessories, and valves, disaster prevention products, road, railway, and information and communication-related products. The firm also manufactures and sells industrial machines such as mixers, kneaders, and press machines; special cast irons and cast steel; and plant engineering. In addition, the company offers to separate and convey products, dredge pumps, sanitary and air conditioning equipment, civil engineering material products, construction materials, winding core pipes, fiber reinforced plastics, and pharmaceutical equipment.
80GF Score
Get the complete analysis for TSE:5602
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:5602 has been successfully added to your 
