Precision DrillingPDS +2.28%71 Altman Z2-Score is 1.18 as of Jun. 25, 2026, which is 123% above its 10-year median of 0.53. GuruFocus rates PDS with a GF Score™ of 71/100 and a GF Value™ of $65.64 (Modestly Overvalued). The stock has 2 warning signs investors should review. Among 1,012 Oil & Gas companies, Precision Drilling ranks worse than 59.19% on this metric.
Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Precision Drilling has a Altman Z2-Score of 1.18, indicating it is in Grey Zones. This implies that Precision Drilling is in some kind of financial stress. If it is below 1.1, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for Precision Drilling's Altman Z2-Score or its related term are showing as below:
PDS'
s Altman Z2-Score Range Over the Past 10 Years
Min: -0.71 Med: 0.53 Max: 1.42
Current: 1.18
During the past 13 years, Precision Drilling's highest Altman Z2-Score was 1.42. The lowest was -0.71. And the median was 0.53.
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
Altman Z2-Score does not apply to financial companies.
Precision Drilling Altman Z2-Score Related Terms
Precision Drilling Altman Z2-Score Historical Data
* Premium members only.
The historical data trend for Precision Drilling's Altman Z2-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Oil & Gas Drilling subindustry, Precision Drilling's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Precision Drilling Altman Z2-Score vs Oil & Gas Industry
For the Oil & Gas industry and Energy sector, Precision Drilling's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where Precision Drilling's Altman Z2-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
Precision Drilling's Altman Z2-Score for today is calculated with this formula:
Z
=
6.56
*
X1
+
3.26
*
X2
+
6.72
*
X3
+
1.05
*
X4_2
=
6.56
*
0.0757
+
3.26
*
-0.3199
+
6.72
*
0.0315
+
1.05
*
1.4385
=
1.18
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
Precision Drilling (PDS) has a Altman Z2-Score of 1.18 as of Jun. 25, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Precision Drilling and its competitors. This is 123% above median its historical median of 0.53. According to the industry distribution chart, Precision Drilling ranks #599 out of 1012 companies in the Oil & Gas industry, placing it in the top 59.2%.
Is Precision Drilling's Altman Z2-Score too high?
Precision Drilling's current Altman Z2-Score of 1.18 is 123% above median its 10-year median of 0.53. The Oil & Gas industry median Altman Z2-Score is 1.81. Precision Drilling's value of 1.18 is 34.6% below this industry median. Based on the distribution chart, Precision Drilling ranks #599 out of 1012 companies in the Oil & Gas industry, which is below the industry midpoint. Overall, Precision Drilling has a GF Score™ of 71/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Precision Drilling's Altman Z2-Score compare to NE and RIG?
According to the Oil & Gas industry distribution chart, Precision Drilling ranks #599 out of 1012 companies for Altman Z2-Score. This places Precision Drilling in the lower half of its industry. The industry median Altman Z2-Score is 1.81. Precision Drilling's value of 1.18 is 34.6% below this benchmark. While the company's 10-year median is 0.53 vs. the industry median of 1.81, Precision Drilling has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for an Oil & Gas company?
The median Altman Z2-Score among Oil & Gas companies is 1.81, based on 1,012 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Precision Drilling's current Altman Z2-Score of 1.18 is 34.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Precision Drilling and its competitors. For the Oil & Gas industry, the median Altman Z2-Score is 1.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Precision Drilling's current Altman Z2-Score is 1.18, which is 123% above median its own 10-year median of 0.53. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Precision Drilling stock overvalued right now?
Based on GuruFocus' analysis, Precision Drilling (PDS) is currently considered Modestly Overvalued. The stock's GF Value™ is $65.64, compared to a current price of $79.33 — trading 20.8% above its estimated fair value. The current Altman Z2-Score is 1.18, which is 123% above median its 10-year median of 0.53 and 34.6% below the Oil & Gas industry median of 1.81. Precision Drilling's overall GF Score™ is 71/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For Precision Drilling (PDS), the current Altman Z2-Score is 1.18 as of Jun. 25, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Precision Drilling (PDS) Overvalued in 2026?
Based on GuruFocus' analysis, Precision Drilling stock appears to be overvalued.
The current stock price of $79.33 is trading 20.8% above its estimated GF Value™ of $65.64.
GuruFocus considers Precision Drilling to be Modestly Overvalued.
Key valuation signals for PDS:
Altman Z2-Score: 1.18 (123% above median its 10-year median of 0.53)
GF Value™: $65.64 vs. price of $79.33 (20.8% above fair value)
Industry Position: 34.6% below the Oil & Gas median (#599 of 1012)
No single metric tells the full story. See the PDS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Precision Drilling Corp is a provider of contract drilling, completion, and production services to oil and natural gas exploration and production companies in Canada, the United States, and certain international locations. The company operates through two industry segments: Contract Drilling Services, which generates maximum revenue and includes drilling rigs, procurement and distribution of oilfield supplies, and the manufacture, sale, and repair of drilling equipment; and Completion and Production Services, which includes service rigs, oilfield equipment rental, and camp services. The company generates the majority of its revenue from the United States.
71GF Score
Get the complete analysis for PDS
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
PDS has been successfully added to your 
