Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of -1.95 is in distress zone. This implies bankruptcy possibility in the next two years.
Alliance Integrated Metaliks has a Altman Z-Score of -1.95, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Alliance Integrated Metaliks's Altman Z-Score or its related term are showing as below:
BOM:534064'
s Altman Z-Score Range Over the Past 10 Years
Min: -5.2 Med: -3.12 Max: -1.26
Current: -1.95
During the past 13 years, Alliance Integrated Metaliks's highest Altman Z-Score was -1.26. The lowest was -5.20. And the median was -3.12.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:534064 vs CRS, ATI, MLI: Altman Z-Score Comparison
For the Metal Fabrication subindustry, Alliance Integrated Metaliks's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Alliance Integrated Metaliks Altman Z-Score vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Alliance Integrated Metaliks's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Alliance Integrated Metaliks's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Alliance Integrated Metaliks (BOM:534064) has a Altman Z-Score of -1.95 as of Jul. 17, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Alliance Integrated Metaliks and its competitors. According to the industry distribution chart, Alliance Integrated Metaliks ranks #2913 out of 3005 companies in the Industrial Products industry, placing it in the top 96.9%.
Is Alliance Integrated Metaliks' Altman Z-Score too high?
Alliance Integrated Metaliks' current Altman Z-Score is -1.95. Based on the distribution chart, Alliance Integrated Metaliks ranks #2913 out of 3005 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Alliance Integrated Metaliks has a GF Score™ of 34/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Alliance Integrated Metaliks' Altman Z-Score compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Alliance Integrated Metaliks ranks #2913 out of 3005 companies for Altman Z-Score. This places Alliance Integrated Metaliks in the lower half of its industry. The industry median Altman Z-Score is 3.32. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.32, based on 3,005 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Alliance Integrated Metaliks and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.32 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Alliance Integrated Metaliks's current Altman Z-Score is -1.95. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Alliance Integrated Metaliks stock overvalued right now?
Based on GuruFocus' analysis, Alliance Integrated Metaliks (BOM:534064) is currently considered Possible Value Trap. The stock's GF Value™ is ₹11.39, compared to a current price of ₹2.01 — trading 82.4% below its estimated fair value. The current Altman Z-Score is -1.95. Alliance Integrated Metaliks' overall GF Score™ is 34/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Alliance Integrated Metaliks (BOM:534064), the current Altman Z-Score is -1.95 as of Jul. 17, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Alliance Integrated Metaliks (BOM:534064) Overvalued in 2026?
Based on GuruFocus' analysis, Alliance Integrated Metaliks stock appears to be undervalued.
The current stock price of ₹2.01 is trading 82.4% below its estimated GF Value™ of ₹11.39.
GuruFocus considers Alliance Integrated Metaliks to be Possible Value Trap.
Key valuation signals for BOM:534064:
Altman Z-Score: -1.95
GF Value™: ₹11.39 vs. price of ₹2.01 (82.4% below fair value)
No single metric tells the full story. See the BOM:534064 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Alliance Integrated Metaliks Ltd manufactures specialty steel and alloy products catering to automobile, industrial, and engineering applications. The company produces heavy steel superstructures like bridges for rail, road, metro, and expressways, foot over bridges, high-rise buildings, thermal power plants, marine equipment, stadiums, and airport superstructures. It also fabricates steel for power plant structures and auxiliary equipment and delivers turnkey fabrication solutions for sugar, cement, and petrochemical plants. Alliance Integrated Metaliks serves large infrastructure projects such as NHAI, DFCC, and railways with a focus on complex steel structures and engineering fabrication.
34GF Score
Get the complete analysis for BOM:534064
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:534064 has been successfully added to your 
