Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
DMR EngineeringBOM:543410 -6.28%77 Altman Z-Score is 11.14 as of Jul. 21, 2026, which is 7% below its 10-year median of 12.04. GuruFocus rates BOM:543410 with a GF Score™ of 77/100 and a GF Value™ of ₹77.79 (Significantly Undervalued). The stock has 4 warning signs investors should review. Among 1,756 Construction companies, DMR Engineering ranks better than 96.87% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Good Sign:
Altman Z-score of 11.75 is strong.
DMR Engineering has a Altman Z-Score of 11.14, indicating it is in Safe Zones. This implies the Altman Z-Score is strong.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for DMR Engineering's Altman Z-Score or its related term are showing as below:
BOM:543410'
s Altman Z-Score Range Over the Past 10 Years
Min: 7.62 Med: 12.04 Max: 19.11
Current: 11.75
During the past 8 years, DMR Engineering's highest Altman Z-Score was 19.11. The lowest was 7.62. And the median was 12.04.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
DMR Engineering Altman Z-Score Related Terms
DMR Engineering Altman Z-Score Historical Data
* Premium members only.
The historical data trend for DMR Engineering's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BOM:543410 vs PWR, FIX, EME: Altman Z-Score Comparison
For the Engineering & Construction subindustry, DMR Engineering's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
DMR Engineering Altman Z-Score vs Construction Industry
For the Construction industry and Industrials sector, DMR Engineering's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where DMR Engineering's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
DMR Engineering's Altman Z-Score for today is calculated with this formula:
Z
=
1.2
*
X1
+
1.4
*
X2
+
3.3
*
X3
+
0.6
*
X4
+
1.0
*
X5
=
1.2
*
0.4075
+
1.4
*
0.1871
+
3.3
*
0.146
+
0.6
*
15.2156
+
1.0
*
0.7731
=
11.14
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
DMR Engineering (BOM:543410) has a Altman Z-Score of 11.14 as of Jul. 21, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on DMR Engineering and its competitors. This is near median its historical median of 12.04. Over the past decade, DMR Engineering's Altman Z-Score has ranged from 7.62 to 19.11. According to the industry distribution chart, DMR Engineering ranks #55 out of 1756 companies in the Construction industry, placing it in the top 3.1%.
Is DMR Engineering's Altman Z-Score too high?
DMR Engineering's current Altman Z-Score of 11.14 is near median its 10-year median of 12.04. Over the past 10 years, this metric has ranged from a low of 7.62 to a high of 19.11. The Construction industry median Altman Z-Score is 2.31. DMR Engineering's value of 11.14 is 382.3% above this industry median. Based on the distribution chart, DMR Engineering ranks #55 out of 1756 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, DMR Engineering has a GF Score™ of 77/100 and is considered Significantly Undervalued, reflecting its overall financial health beyond just this single metric.
How does DMR Engineering's Altman Z-Score compare to PWR and FIX?
According to the Construction industry distribution chart, DMR Engineering ranks #55 out of 1756 companies for Altman Z-Score. This places DMR Engineering in the top 3% of its industry — outperforming the majority of peers. The industry median Altman Z-Score is 2.31. DMR Engineering's value of 11.14 is 382.3% above this benchmark. Historically, DMR Engineering's own Altman Z-Score has ranged from 7.62 to 19.11 over the past decade. While the company's 10-year median is 12.04 vs. the industry median of 2.31, DMR Engineering has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Construction company?
The median Altman Z-Score among Construction companies is 2.31, based on 1,756 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. DMR Engineering's current Altman Z-Score of 11.14 is 382.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on DMR Engineering and its competitors. For the Construction industry, the median Altman Z-Score is 2.31 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. DMR Engineering's current Altman Z-Score is 11.14, which is near median its own 10-year median of 12.04. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is DMR Engineering stock overvalued right now?
Based on GuruFocus' analysis, DMR Engineering (BOM:543410) is currently considered Significantly Undervalued. The stock's GF Value™ is ₹77.79, compared to a current price of ₹27.60 — trading 64.5% below its estimated fair value. The current Altman Z-Score is 11.14, which is near median its 10-year median of 12.04 and 382.3% above the Construction industry median of 2.31. DMR Engineering's overall GF Score™ is 77/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For DMR Engineering (BOM:543410), the current Altman Z-Score is 11.14 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is DMR Engineering (BOM:543410) Overvalued in 2026?
Based on GuruFocus' analysis, DMR Engineering stock appears to be undervalued.
The current stock price of ₹27.60 is trading 64.5% below its estimated GF Value™ of ₹77.79.
GuruFocus considers DMR Engineering to be Significantly Undervalued.
Key valuation signals for BOM:543410:
Altman Z-Score: 11.14 (near median its 10-year median of 12.04)
GF Value™: ₹77.79 vs. price of ₹27.60 (64.5% below fair value)
Industry Position: 382.3% above the Construction median (#55 of 1756)
No single metric tells the full story. See the BOM:543410 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
DMR Engineering Ltd is engaged in providing engineering consultancy and due diligence services to hydropower, dams, roads, and railway tunnels. The services offered by the company include the entire life cycle of projects covering design and engineering, due diligence and regulatory, bid management and construction engineering, and quality and inspection. The company generates the majority of its revenue from India.
77GF Score
Get the complete analysis for BOM:543410
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:543410 has been successfully added to your 
