Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 2.81 is in the grey area. This implies that the company is under some kind of financial stress. If it is below 1.8, the company may face bankruptcy risk.
Safety Controls & Devices has a Altman Z-Score of 2.81, indicating it is in Grey Zones. This implies that Safety Controls & Devices is in some kind of financial stress. If it is below 1.81, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Safety Controls & Devices's Altman Z-Score or its related term are showing as below:
BOM:544746'
s Altman Z-Score Range Over the Past 10 Years
Min: 0 Med: 0 Max: 2.81
Current: 2.81
During the past 3 years, Safety Controls & Devices's highest Altman Z-Score was 2.81. The lowest was 0.00. And the median was 0.00.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Safety Controls & Devices Altman Z-Score Chart
Safety Controls & Devices Annual Data
Trend
Mar23
Mar24
Mar25
Altman Z-Score
0.00
0.00
0.00
Safety Controls & Devices Semi-Annual Data
Mar23
Mar24
Mar25
Altman Z-Score
0.00
0.00
0.00
BOM:544746 vs PWR, FIX, EME: Altman Z-Score Comparison
For the Engineering & Construction subindustry, Safety Controls & Devices's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Safety Controls & Devices Altman Z-Score vs Construction Industry
For the Construction industry and Industrials sector, Safety Controls & Devices's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Safety Controls & Devices's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Safety Controls & Devices (BOM:544746) has a Altman Z-Score of 2.81 as of Jul. 26, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Safety Controls & Devices and its competitors. According to the industry distribution chart, Safety Controls & Devices ranks #682 out of 1754 companies in the Construction industry, placing it in the top 38.9%.
Is Safety Controls & Devices' Altman Z-Score too high?
Safety Controls & Devices' current Altman Z-Score is 2.81. The Construction industry median Altman Z-Score is 2.29. Safety Controls & Devices' value of 2.81 is 22.7% above this industry median. Based on the distribution chart, Safety Controls & Devices ranks #682 out of 1754 companies in the Construction industry, which is above the industry midpoint. Overall, Safety Controls & Devices has a GF Score™ of 14/100, reflecting its overall financial health beyond just this single metric.
How does Safety Controls & Devices' Altman Z-Score compare to PWR and FIX?
According to the Construction industry distribution chart, Safety Controls & Devices ranks #682 out of 1754 companies for Altman Z-Score. This puts Safety Controls & Devices in the upper half of its industry. The industry median Altman Z-Score is 2.29. Safety Controls & Devices' value of 2.81 is 22.7% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Construction company?
The median Altman Z-Score among Construction companies is 2.29, based on 1,754 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Safety Controls & Devices's current Altman Z-Score of 2.81 is 22.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Safety Controls & Devices and its competitors. For the Construction industry, the median Altman Z-Score is 2.29 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Safety Controls & Devices's current Altman Z-Score is 2.81. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Safety Controls & Devices stock overvalued right now?
Safety Controls & Devices (BOM:544746) has a current Altman Z-Score of 2.81. The current Altman Z-Score is 2.81 and 22.7% above the Construction industry median of 2.29. Safety Controls & Devices' overall GF Score™ is 14/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Safety Controls & Devices (BOM:544746), the current Altman Z-Score is 2.81 as of Jul. 26, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Safety Controls & Devices Ltd is engaged in the execution of long term EPC projects, Fire Fighting projects and related business activities. The company focuses on the installation of substations, construction of solar plants, installation of firefighting equipment. The company's turnkey projects in multiple sectors include transmission and distribution, solar energy, EV charging infrastructure, fire protection systems, hospital construction, and others.
14GF Score
Get the complete analysis for BOM:544746
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BOM:544746 has been successfully added to your 
