Cooper-Standard HoldingsFRA:C31 +6.19%60 Altman Z-Score is 1.51 as of Jun. 30, 2026, which is 1% below its 10-year median of 1.52. GuruFocus rates FRA:C31 with a GF Score™ of 60/100 and a GF Value™ of €15.64 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,311 Vehicles & Parts companies, Cooper-Standard Holdings ranks worse than 77.04% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 1.52 is in distress zone. This implies bankruptcy possibility in the next two years.
Cooper-Standard Holdings has a Altman Z-Score of 1.51, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Cooper-Standard Holdings's Altman Z-Score or its related term are showing as below:
FRA:C31'
s Altman Z-Score Range Over the Past 10 Years
Min: 0.86 Med: 1.52 Max: 3.03
Current: 1.52
During the past 13 years, Cooper-Standard Holdings's highest Altman Z-Score was 3.03. The lowest was 0.86. And the median was 1.52.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
FRA:C31 vs MNRO, ECX, SLDP: Altman Z-Score Comparison
For the Auto Parts subindustry, Cooper-Standard Holdings's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Cooper-Standard Holdings Altman Z-Score vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Cooper-Standard Holdings's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Cooper-Standard Holdings's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Cooper-Standard Holdings (FRA:C31) has a Altman Z-Score of 1.51 as of Jun. 30, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Cooper-Standard Holdings and its competitors. This is near median its historical median of 1.52. Over the past decade, Cooper-Standard Holdings' Altman Z-Score has ranged from 0.86 to 3.03. According to the industry distribution chart, Cooper-Standard Holdings ranks #1010 out of 1311 companies in the Vehicles & Parts industry, placing it in the top 77%.
Is Cooper-Standard Holdings' Altman Z-Score too high?
Cooper-Standard Holdings' current Altman Z-Score of 1.51 is near median its 10-year median of 1.52. Over the past 10 years, this metric has ranged from a low of 0.86 to a high of 3.03. The Vehicles & Parts industry median Altman Z-Score is 2.54. Cooper-Standard Holdings' value of 1.51 is 40.6% below this industry median. Based on the distribution chart, Cooper-Standard Holdings ranks #1010 out of 1311 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Cooper-Standard Holdings has a GF Score™ of 60/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Cooper-Standard Holdings' Altman Z-Score compare to MNRO and ECX?
According to the Vehicles & Parts industry distribution chart, Cooper-Standard Holdings ranks #1010 out of 1311 companies for Altman Z-Score. This places Cooper-Standard Holdings in the lower half of its industry. The industry median Altman Z-Score is 2.54. Cooper-Standard Holdings' value of 1.51 is 40.6% below this benchmark. Historically, Cooper-Standard Holdings' own Altman Z-Score has ranged from 0.86 to 3.03 over the past decade. While the company's 10-year median is 1.52 vs. the industry median of 2.54, Cooper-Standard Holdings has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Vehicles & Parts company?
The median Altman Z-Score among Vehicles & Parts companies is 2.54, based on 1,311 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Cooper-Standard Holdings's current Altman Z-Score of 1.51 is 40.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Cooper-Standard Holdings and its competitors. For the Vehicles & Parts industry, the median Altman Z-Score is 2.54 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Cooper-Standard Holdings's current Altman Z-Score is 1.51, which is near median its own 10-year median of 1.52. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Cooper-Standard Holdings stock overvalued right now?
Based on GuruFocus' analysis, Cooper-Standard Holdings (FRA:C31) is currently considered Significantly Overvalued. The stock's GF Value™ is €15.64, compared to a current price of €25.40 — trading 62.4% above its estimated fair value. The current Altman Z-Score is 1.51, which is near median its 10-year median of 1.52 and 40.6% below the Vehicles & Parts industry median of 2.54. Cooper-Standard Holdings' overall GF Score™ is 60/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Cooper-Standard Holdings (FRA:C31), the current Altman Z-Score is 1.51 as of Jun. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Cooper-Standard Holdings (FRA:C31) Overvalued in 2026?
Based on GuruFocus' analysis, Cooper-Standard Holdings stock appears to be overvalued.
The current stock price of €25.40 is trading 62.4% above its estimated GF Value™ of €15.64.
GuruFocus considers Cooper-Standard Holdings to be Significantly Overvalued.
Key valuation signals for FRA:C31:
Altman Z-Score: 1.51 (near median its 10-year median of 1.52)
GF Value™: €15.64 vs. price of €25.40 (62.4% above fair value)
Industry Position: 40.6% below the Vehicles & Parts median (#1010 of 1311)
No single metric tells the full story. See the FRA:C31 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Cooper-Standard Holdings Inc is engaged in the manufacture of sealing and fluid handling systems (consisting of fuel and brake delivery systems and fluid transfer systems). Its products are designed for passenger vehicles and light trucks that are manufactured by automotive original equipment manufacturers (OEMs) and replacement markets. It has two reportable segments: Sealing Systems and Fluid Handling Systems. The group's geographic regions are North America, Europe, Asia Pacific, and South America.
60GF Score
Get the complete analysis for FRA:C31
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:C31 has been successfully added to your 
