Vinacomin Machinery JSCHSTC:CTT 74 Altman Z-Score is 4.07 as of Jul. 02, 2026, which is 18% above its 10-year median of 3.46. GuruFocus rates HSTC:CTT with a GF Score™ of 74/100 and a GF Value™ of ₫17,625.45 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 3,006 Industrial Products companies, Vinacomin Machinery JSC ranks better than 58.92% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Good Sign:
Altman Z-score of 4.07 is strong.
Vinacomin Machinery JSC has a Altman Z-Score of 4.07, indicating it is in Safe Zones. This implies the Altman Z-Score is strong.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Vinacomin Machinery JSC's Altman Z-Score or its related term are showing as below:
HSTC:CTT'
s Altman Z-Score Range Over the Past 10 Years
Min: 2.18 Med: 3.46 Max: 4.49
Current: 4.07
During the past 8 years, Vinacomin Machinery JSC's highest Altman Z-Score was 4.49. The lowest was 2.18. And the median was 3.46.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
HSTC:CTT vs GEV, ETN, PH: Altman Z-Score Comparison
For the Specialty Industrial Machinery subindustry, Vinacomin Machinery JSC's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Vinacomin Machinery JSC Altman Z-Score vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Vinacomin Machinery JSC's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Vinacomin Machinery JSC's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Vinacomin Machinery JSC (HSTC:CTT) has a Altman Z-Score of 4.07 as of Jul. 02, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Vinacomin Machinery JSC and its competitors. This is 18% above median its historical median of 3.46. Over the past decade, Vinacomin Machinery JSC's Altman Z-Score has ranged from 2.18 to 4.49. According to the industry distribution chart, Vinacomin Machinery JSC ranks #1235 out of 3006 companies in the Industrial Products industry, placing it in the top 41.1%.
Is Vinacomin Machinery JSC's Altman Z-Score too high?
Vinacomin Machinery JSC's current Altman Z-Score of 4.07 is 18% above median its 10-year median of 3.46. Over the past 10 years, this metric has ranged from a low of 2.18 to a high of 4.49. The Industrial Products industry median Altman Z-Score is 3.36. Vinacomin Machinery JSC's value of 4.07 is 21.3% above this industry median. Based on the distribution chart, Vinacomin Machinery JSC ranks #1235 out of 3006 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Vinacomin Machinery JSC has a GF Score™ of 74/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Vinacomin Machinery JSC's Altman Z-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Vinacomin Machinery JSC ranks #1235 out of 3006 companies for Altman Z-Score. This puts Vinacomin Machinery JSC in the upper half of its industry. The industry median Altman Z-Score is 3.36. Vinacomin Machinery JSC's value of 4.07 is 21.3% above this benchmark. Historically, Vinacomin Machinery JSC's own Altman Z-Score has ranged from 2.18 to 4.49 over the past decade. While the company's 10-year median is 3.46 vs. the industry median of 3.36, Vinacomin Machinery JSC has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.36, based on 3,006 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Vinacomin Machinery JSC's current Altman Z-Score of 4.07 is 21.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Vinacomin Machinery JSC and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.36 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Vinacomin Machinery JSC's current Altman Z-Score is 4.07, which is 18% above median its own 10-year median of 3.46. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Vinacomin Machinery JSC stock overvalued right now?
Based on GuruFocus' analysis, Vinacomin Machinery JSC (HSTC:CTT) is currently considered Modestly Undervalued. The stock's GF Value™ is ₫17,625.45, compared to a current price of ₫15,600.00 — trading 11.5% below its estimated fair value. The current Altman Z-Score is 4.07, which is 18% above median its 10-year median of 3.46 and 21.3% above the Industrial Products industry median of 3.36. Vinacomin Machinery JSC's overall GF Score™ is 74/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Vinacomin Machinery JSC (HSTC:CTT), the current Altman Z-Score is 4.07 as of Jul. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Vinacomin Machinery JSC (HSTC:CTT) Overvalued in 2026?
Based on GuruFocus' analysis, Vinacomin Machinery JSC stock appears to be undervalued.
The current stock price of ₫15,600.00 is trading 11.5% below its estimated GF Value™ of ₫17,625.45.
GuruFocus considers Vinacomin Machinery JSC to be Modestly Undervalued.
Key valuation signals for HSTC:CTT:
Altman Z-Score: 4.07 (18% above median its 10-year median of 3.46)
GF Value™: ₫17,625.45 vs. price of ₫15,600.00 (11.5% below fair value)
Industry Position: 21.3% above the Industrial Products median (#1235 of 3006)
No single metric tells the full story. See the HSTC:CTT stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Vinacomin Machinery JSC is a Vietnam based Manufacturing mechanical products. Business activities includes Manufacture of machinery for mining, quarrying and construction; Manufacture of bearings, gears, gearing and driving elements Repair of machinery and equipment; Repair of electrical equipment; Repair and maintenance of transport equipment, (except motor vehicles, motorcycles); Repair of other equipment; Installation of industrial machinery and equipment; Maintenance of motor vehicles and other motor vehicles; Casting of iron and steel; Manufacture of railway or tramway locomotives and rolling stock.
74GF Score
Get the complete analysis for HSTC:CTT
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
HSTC:CTT has been successfully added to your 
