Melrose IndustriesMLSPF -3.02%69 Altman Z-Score is 2.18 as of Jun. 24, 2026, which is 34% above its 10-year median of 1.63. GuruFocus rates MLSPF with a GF Score™ of 69/100 and a GF Value™ of $8.74 (Modestly Undervalued). The stock has 6 warning signs investors should review. Among 3,013 Industrial Products companies, Melrose Industries ranks worse than 72.55% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 2.19 is in the grey area. This implies that the company is under some kind of financial stress. If it is below 1.8, the company may face bankruptcy risk.
Melrose Industries has a Altman Z-Score of 2.18, indicating it is in Grey Zones. This implies that Melrose Industries is in some kind of financial stress. If it is below 1.81, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Melrose Industries's Altman Z-Score or its related term are showing as below:
MLSPF'
s Altman Z-Score Range Over the Past 10 Years
Min: 0.76 Med: 1.63 Max: 3.22
Current: 2.19
During the past 13 years, Melrose Industries's highest Altman Z-Score was 3.22. The lowest was 0.76. And the median was 1.63.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
Melrose Industries Altman Z-Score Related Terms
Melrose Industries Altman Z-Score Historical Data
* Premium members only.
The historical data trend for Melrose Industries's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Melrose Industries's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Melrose Industries Altman Z-Score vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Melrose Industries's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Melrose Industries's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Melrose Industries's Altman Z-Score for today is calculated with this formula:
Z
=
1.2
*
X1
+
1.4
*
X2
+
3.3
*
X3
+
0.6
*
X4
+
1.0
*
X5
=
1.2
*
-0.0037
+
1.4
*
0.5124
+
3.3
*
0.0782
+
0.6
*
1.2272
+
1.0
*
0.4725
=
2.18
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Melrose Industries (MLSPF) has a Altman Z-Score of 2.18 as of Jun. 24, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Melrose Industries and its competitors. This is 34% above median its historical median of 1.63. Over the past decade, Melrose Industries' Altman Z-Score has ranged from 0.76 to 3.22. According to the industry distribution chart, Melrose Industries ranks #2186 out of 3013 companies in the Industrial Products industry, placing it in the top 72.6%.
Is Melrose Industries' Altman Z-Score too high?
Melrose Industries' current Altman Z-Score of 2.18 is 34% above median its 10-year median of 1.63. Over the past 10 years, this metric has ranged from a low of 0.76 to a high of 3.22. The Industrial Products industry median Altman Z-Score is 3.42. Melrose Industries' value of 2.18 is 36.3% below this industry median. Based on the distribution chart, Melrose Industries ranks #2186 out of 3013 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Melrose Industries has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Melrose Industries' Altman Z-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Melrose Industries ranks #2186 out of 3013 companies for Altman Z-Score. This places Melrose Industries in the lower half of its industry. The industry median Altman Z-Score is 3.42. Melrose Industries' value of 2.18 is 36.3% below this benchmark. Historically, Melrose Industries' own Altman Z-Score has ranged from 0.76 to 3.22 over the past decade. While the company's 10-year median is 1.63 vs. the industry median of 3.42, Melrose Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.42, based on 3,013 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Melrose Industries's current Altman Z-Score of 2.18 is 36.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Melrose Industries and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.42 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Melrose Industries's current Altman Z-Score is 2.18, which is 34% above median its own 10-year median of 1.63. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Melrose Industries stock overvalued right now?
Based on GuruFocus' analysis, Melrose Industries (MLSPF) is currently considered Modestly Undervalued. The stock's GF Value™ is $8.74, compared to a current price of $6.18 — trading 29.3% below its estimated fair value. The current Altman Z-Score is 2.18, which is 34% above median its 10-year median of 1.63 and 36.3% below the Industrial Products industry median of 3.42. Melrose Industries' overall GF Score™ is 69/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Melrose Industries (MLSPF), the current Altman Z-Score is 2.18 as of Jun. 24, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Melrose Industries (MLSPF) Overvalued in 2026?
Based on GuruFocus' analysis, Melrose Industries stock appears to be undervalued.
The current stock price of $6.18 is trading 29.3% below its estimated GF Value™ of $8.74.
GuruFocus considers Melrose Industries to be Modestly Undervalued.
Key valuation signals for MLSPF:
Altman Z-Score: 2.18 (34% above median its 10-year median of 1.63)
GF Value™: $8.74 vs. price of $6.18 (29.3% below fair value)
Industry Position: 36.3% below the Industrial Products median (#2186 of 3013)
No single metric tells the full story. See the MLSPF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Melrose Industries is a UK-based company that manufactures engines and structures products for all major OEMs across civil and defense markets. The company employs 13,032 people and generates approximately 75% of its revenue from the civil market, manufacturing engines and structures for major OEMs in both civil and defense sectors.In the civil market, the company operates in 90% of existing fleets in service and is a demonstrator partner in the GTF and CFM RISE next-generation engines for narrow-body aircraft.
69GF Score
Get the complete analysis for MLSPF
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MLSPF has been successfully added to your 
