WOL 3D IndiaNSE:WOL3D +1.36%18 Altman Z-Score is 4.07 as of Jul. 08, 2026, which is 28% below its 10-year median of 5.69. GuruFocus rates NSE:WOL3D with a GF Score™ of 18/100. The stock has 4 warning signs investors should review. Among 2,458 Hardware companies, WOL 3D India ranks better than 56.18% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Good Sign:
Altman Z-score of 4.19 is strong.
WOL 3D India has a Altman Z-Score of 4.07, indicating it is in Safe Zones. This implies the Altman Z-Score is strong.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for WOL 3D India's Altman Z-Score or its related term are showing as below:
NSE:WOL3D'
s Altman Z-Score Range Over the Past 10 Years
Min: 3.93 Med: 5.69 Max: 7.44
Current: 4.19
During the past 5 years, WOL 3D India's highest Altman Z-Score was 7.44. The lowest was 3.93. And the median was 5.69.
WOL 3D India (NSE:WOL3D) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
WOL 3D India Altman Z-Score Related Terms
WOL 3D India Altman Z-Score Historical Data
* Premium members only.
The historical data trend for WOL 3D India's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
WOL 3D India Altman Z-Score Chart
WOL 3D India Annual Data
Trend
Mar22
Mar23
Mar24
Mar25
Mar26
Altman Z-Score
0.00
0.00
0.00
7.44
3.93
WOL 3D India Semi-Annual Data
Mar22
Mar23
Mar24
Mar25
Mar26
Altman Z-Score
0.00
0.00
0.00
7.44
3.93
NSE:WOL3D vs SNDK, DELL, STX: Altman Z-Score Comparison
For the Computer Hardware subindustry, WOL 3D India's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
WOL 3D India Altman Z-Score vs Hardware Industry
For the Hardware industry and Technology sector, WOL 3D India's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where WOL 3D India's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
WOL 3D India's Altman Z-Score for today is calculated with this formula:
Z
=
1.2
*
X1
+
1.4
*
X2
+
3.3
*
X3
+
0.6
*
X4
+
1.0
*
X5
=
1.2
*
0.4991
+
1.4
*
0
+
3.3
*
0.1311
+
0.6
*
2.7893
+
1.0
*
1.3661
=
4.07
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
WOL 3D India (NSE:WOL3D) has a Altman Z-Score of 4.07 as of Jul. 08, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on WOL 3D India and its competitors. This is 28% below median its historical median of 5.69. Over the past decade, WOL 3D India's Altman Z-Score has ranged from 3.93 to 7.44. According to the industry distribution chart, WOL 3D India ranks #1077 out of 2458 companies in the Hardware industry, placing it in the top 43.8%.
Is WOL 3D India's Altman Z-Score too high?
WOL 3D India's current Altman Z-Score of 4.07 is 28% below median its 10-year median of 5.69. Over the past 10 years, this metric has ranged from a low of 3.93 to a high of 7.44. The Hardware industry median Altman Z-Score is 3.64. WOL 3D India's value of 4.07 is 11.8% above this industry median. Based on the distribution chart, WOL 3D India ranks #1077 out of 2458 companies in the Hardware industry, which is above the industry midpoint. Overall, WOL 3D India has a GF Score™ of 18/100, reflecting its overall financial health beyond just this single metric.
How does WOL 3D India's Altman Z-Score compare to SNDK and DELL?
According to the Hardware industry distribution chart, WOL 3D India ranks #1077 out of 2458 companies for Altman Z-Score. This puts WOL 3D India in the upper half of its industry. The industry median Altman Z-Score is 3.64. WOL 3D India's value of 4.07 is 11.8% above this benchmark. Historically, WOL 3D India's own Altman Z-Score has ranged from 3.93 to 7.44 over the past decade. While the company's 10-year median is 5.69 vs. the industry median of 3.64, WOL 3D India has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Hardware company?
The median Altman Z-Score among Hardware companies is 3.64, based on 2,458 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. WOL 3D India's current Altman Z-Score of 4.07 is 11.8% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on WOL 3D India and its competitors. For the Hardware industry, the median Altman Z-Score is 3.64 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. WOL 3D India's current Altman Z-Score is 4.07, which is 28% below median its own 10-year median of 5.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is WOL 3D India stock overvalued right now?
WOL 3D India (NSE:WOL3D) has a current Altman Z-Score of 4.07. The current Altman Z-Score is 4.07, which is 28% below median its 10-year median of 5.69 and 11.8% above the Hardware industry median of 3.64. WOL 3D India's overall GF Score™ is 18/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For WOL 3D India (NSE:WOL3D), the current Altman Z-Score is 4.07 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
WOL 3D India Ltd is engaged in the business of providing 3D Printing solutions, enabling easier prototyping, finding its application in various sectors like manufacturing, education, engineering, architecture, interior designing, fashion designing, product designing, medical, dental, and others. The portfolio of the company includes Hardware like: 3D printers, 3D Scanners, Laser Engravers and 3D pens; Consumables like: 3D Filaments, 3D Resins; 3D Prototyping services; and Other services.
18GF Score
Get the complete analysis for NSE:WOL3D
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:WOL3D has been successfully added to your 