Takamatsu Machinery CoTSE:6155 59 Altman Z-Score is 2.60 as of Jul. 04, 2026, which is 3% below its 10-year median of 2.68. GuruFocus rates TSE:6155 with a GF Score™ of 59/100 and a GF Value™ of 円416.88 (Modestly Overvalued). The stock has 5 warning signs investors should review. Among 3,007 Industrial Products companies, Takamatsu Machinery Co ranks worse than 63.78% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 2.6 is in the grey area. This implies that the company is under some kind of financial stress. If it is below 1.8, the company may face bankruptcy risk.
Takamatsu Machinery Co has a Altman Z-Score of 2.60, indicating it is in Grey Zones. This implies that Takamatsu Machinery Co is in some kind of financial stress. If it is below 1.81, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Takamatsu Machinery Co's Altman Z-Score or its related term are showing as below:
TSE:6155'
s Altman Z-Score Range Over the Past 10 Years
Min: 2.36 Med: 2.68 Max: 3.08
Current: 2.6
During the past 13 years, Takamatsu Machinery Co's highest Altman Z-Score was 3.08. The lowest was 2.36. And the median was 2.68.
Takamatsu Machinery Co (TSE:6155) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
Takamatsu Machinery Co Altman Z-Score Related Terms
Takamatsu Machinery Co Altman Z-Score Historical Data
* Premium members only.
The historical data trend for Takamatsu Machinery Co's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6155 vs GEV, ETN, PH: Altman Z-Score Comparison
For the Specialty Industrial Machinery subindustry, Takamatsu Machinery Co's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Takamatsu Machinery Co Altman Z-Score vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Takamatsu Machinery Co's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Takamatsu Machinery Co's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Takamatsu Machinery Co (TSE:6155) has a Altman Z-Score of 2.60 as of Jul. 04, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Takamatsu Machinery Co and its competitors. This is near median its historical median of 2.68. Over the past decade, Takamatsu Machinery Co's Altman Z-Score has ranged from 2.36 to 3.08. According to the industry distribution chart, Takamatsu Machinery Co ranks #1918 out of 3007 companies in the Industrial Products industry, placing it in the top 63.8%.
Is Takamatsu Machinery Co's Altman Z-Score too high?
Takamatsu Machinery Co's current Altman Z-Score of 2.60 is near median its 10-year median of 2.68. Over the past 10 years, this metric has ranged from a low of 2.36 to a high of 3.08. The Industrial Products industry median Altman Z-Score is 3.35. Takamatsu Machinery Co's value of 2.60 is 22.4% below this industry median. Based on the distribution chart, Takamatsu Machinery Co ranks #1918 out of 3007 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Takamatsu Machinery Co has a GF Score™ of 59/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Takamatsu Machinery Co's Altman Z-Score compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Takamatsu Machinery Co ranks #1918 out of 3007 companies for Altman Z-Score. This places Takamatsu Machinery Co in the lower half of its industry. The industry median Altman Z-Score is 3.35. Takamatsu Machinery Co's value of 2.60 is 22.4% below this benchmark. Historically, Takamatsu Machinery Co's own Altman Z-Score has ranged from 2.36 to 3.08 over the past decade. While the company's 10-year median is 2.68 vs. the industry median of 3.35, Takamatsu Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for an Industrial Products company?
The median Altman Z-Score among Industrial Products companies is 3.35, based on 3,007 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Takamatsu Machinery Co's current Altman Z-Score of 2.60 is 22.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Takamatsu Machinery Co and its competitors. For the Industrial Products industry, the median Altman Z-Score is 3.35 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Takamatsu Machinery Co's current Altman Z-Score is 2.60, which is near median its own 10-year median of 2.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Takamatsu Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Takamatsu Machinery Co (TSE:6155) is currently considered Modestly Overvalued. The stock's GF Value™ is 円416.88, compared to a current price of 円495.00 — trading 18.7% above its estimated fair value. The current Altman Z-Score is 2.60, which is near median its 10-year median of 2.68 and 22.4% below the Industrial Products industry median of 3.35. Takamatsu Machinery Co's overall GF Score™ is 59/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Takamatsu Machinery Co (TSE:6155), the current Altman Z-Score is 2.60 as of Jul. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Takamatsu Machinery Co (TSE:6155) Overvalued in 2026?
Based on GuruFocus' analysis, Takamatsu Machinery Co stock appears to be overvalued.
The current stock price of 円495.00 is trading 18.7% above its estimated GF Value™ of 円416.88.
GuruFocus considers Takamatsu Machinery Co to be Modestly Overvalued.
Key valuation signals for TSE:6155:
Altman Z-Score: 2.60 (near median its 10-year median of 2.68)
GF Value™: 円416.88 vs. price of 円495.00 (18.7% above fair value)
Industry Position: 22.4% below the Industrial Products median (#1918 of 3007)
No single metric tells the full story. See the TSE:6155 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Takamatsu Machinery Co Ltd is a Japan-based machine manufacturer. The company is engaged in the manufacturing and sale of machine tools including computer numerical control (CNC) precision lathes, and special-purpose machines.
59GF Score
Get the complete analysis for TSE:6155
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6155 has been successfully added to your 
