Inepar Industria e Construcoes has a current ratio of 0.13. It indicates that the company may have difficulty meeting its current obligations. Low values, however, do not indicate a critical problem. If Inepar Industria e Construcoes has good long-term prospects, it may be able to borrow against those prospects to meet current obligations.
The historical rank and industry rank for Inepar Industria e Construcoes's Current Ratio or its related term are showing as below:
BSP:INEP4'
s Current Ratio Range Over the Past 10 Years
Min: 0.02 Med: 0.13 Max: 0.37
Current: 0.13
During the past 13 years, Inepar Industria e Construcoes's highest Current Ratio was 0.37. The lowest was 0.02. And the median was 0.13.
BSP:INEP4's Current Ratio is ranked worse than 99.09% of 3073
companies
in the Industrial Products industry
Industry Median: 1.96
vs BSP:INEP4: 0.13
Inepar Industria e Construcoes (BSP:INEP4) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Inepar Industria e Construcoes Current Ratio Related Terms
Inepar Industria e Construcoes Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Inepar Industria e Construcoes Current Ratio Chart
BSP:INEP4 vs GEV, ETN, PH: Current Ratio Comparison
For the Specialty Industrial Machinery subindustry, Inepar Industria e Construcoes's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Inepar Industria e Construcoes Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Inepar Industria e Construcoes's Current Ratio distribution charts can be found below:
* The bar in red indicates where Inepar Industria e Construcoes's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Inepar Industria e Construcoes (BSP:INEP4) has a Current Ratio of 0.13 as of Mar. 2026. This is near median its historical median of 0.13. Over the past decade, Inepar Industria e Construcoes' Current Ratio has ranged from 0.02 to 0.37. According to the industry distribution chart, Inepar Industria e Construcoes ranks #3045 out of 3073 companies in the Industrial Products industry, placing it in the top 99.1%.
Is Inepar Industria e Construcoes' Current Ratio too high?
Inepar Industria e Construcoes' current Current Ratio of 0.13 is near median its 10-year median of 0.13. Over the past 10 years, this metric has ranged from a low of 0.02 to a high of 0.37. The Industrial Products industry median Current Ratio is 1.96. Inepar Industria e Construcoes' value of 0.13 is 93.4% below this industry median. Based on the distribution chart, Inepar Industria e Construcoes ranks #3045 out of 3073 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Inepar Industria e Construcoes has a GF Score™ of 36/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Inepar Industria e Construcoes' Current Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Inepar Industria e Construcoes ranks #3045 out of 3073 companies for Current Ratio. This places Inepar Industria e Construcoes in the lower half of its industry. The industry median Current Ratio is 1.96. Inepar Industria e Construcoes' value of 0.13 is 93.4% below this benchmark. Historically, Inepar Industria e Construcoes' own Current Ratio has ranged from 0.02 to 0.37 over the past decade. While the company's 10-year median is 0.13 vs. the industry median of 1.96, Inepar Industria e Construcoes has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,073 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Inepar Industria e Construcoes's current Current Ratio of 0.13 is 93.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Inepar Industria e Construcoes's current Current Ratio is 0.13, which is near median its own 10-year median of 0.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Inepar Industria e Construcoes stock overvalued right now?
Based on GuruFocus' analysis, Inepar Industria e Construcoes (BSP:INEP4) is currently considered Modestly Undervalued. The stock's GF Value™ is R$2.51, compared to a current price of R$2.07 — trading 17.5% below its estimated fair value. The current Current Ratio is 0.13, which is near median its 10-year median of 0.13 and 93.4% below the Industrial Products industry median of 1.96. Inepar Industria e Construcoes' overall GF Score™ is 36/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Inepar Industria e Construcoes (BSP:INEP4), the current Current Ratio is 0.13 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Inepar Industria e Construcoes (BSP:INEP4) Overvalued in 2026?
Based on GuruFocus' analysis, Inepar Industria e Construcoes stock appears to be undervalued.
The current stock price of R$2.07 is trading 17.5% below its estimated GF Value™ of R$2.51.
GuruFocus considers Inepar Industria e Construcoes to be Modestly Undervalued.
Key valuation signals for BSP:INEP4:
Current Ratio: 0.13 (near median its 10-year median of 0.13)
GF Value™: R$2.51 vs. price of R$2.07 (17.5% below fair value)
Industry Position: 93.4% below the Industrial Products median (#3045 of 3073)
No single metric tells the full story. See the BSP:INEP4 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Inepar Industria e Construcoes Business Description
Inepar SA Industria e Construcoes, together with its subsidiaries, is engaged in creating solutions, manufacture, and supply of capital goods, equipment, and services for the generation, transmission and distribution of electricity, among others.
36GF Score
Get the complete analysis for BSP:INEP4
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BSP:INEP4 has been successfully added to your 
