Rodex Fasteners CoROCO:5015 69 Current Ratio is 1.54 as of Dec. 2025, which is 25% below its 10-year median of 2.05. GuruFocus rates ROCO:5015 with a GF Score™ of 69/100 and a GF Value™ of NT$30.16 (Modestly Undervalued). The stock has 8 warning signs investors should review. Among 3,074 Industrial Products companies, Rodex Fasteners Co ranks worse than 67.34% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Rodex Fasteners Co's current ratio for the quarter that ended in Dec. 2025 was 1.54.
Rodex Fasteners Co has a current ratio of 1.54. It generally indicates good short-term financial strength.
The historical rank and industry rank for Rodex Fasteners Co's Current Ratio or its related term are showing as below:
ROCO:5015'
s Current Ratio Range Over the Past 10 Years
Min: 1.54 Med: 2.05 Max: 2.61
Current: 1.54
During the past 13 years, Rodex Fasteners Co's highest Current Ratio was 2.61. The lowest was 1.54. And the median was 2.05.
ROCO:5015's Current Ratio is ranked worse than 67.34% of 3074
companies
in the Industrial Products industry
Industry Median: 1.96
vs ROCO:5015: 1.54
Rodex Fasteners Co (ROCO:5015) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Rodex Fasteners Co Current Ratio Related Terms
Rodex Fasteners Co Current Ratio Historical Data
* Premium members only.
The historical data trend for Rodex Fasteners Co's Current Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
ROCO:5015 vs SNA, RBC, LECO: Current Ratio Comparison
For the Tools & Accessories subindustry, Rodex Fasteners Co's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Rodex Fasteners Co Current Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Rodex Fasteners Co's Current Ratio distribution charts can be found below:
* The bar in red indicates where Rodex Fasteners Co's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Rodex Fasteners Co (ROCO:5015) has a Current Ratio of 1.54 as of Dec. 2025. This is 25% below median its historical median of 2.05. Over the past decade, Rodex Fasteners Co's Current Ratio has ranged from 1.54 to 2.61. According to the industry distribution chart, Rodex Fasteners Co ranks #2070 out of 3074 companies in the Industrial Products industry, placing it in the top 67.3%.
Is Rodex Fasteners Co's Current Ratio too high?
Rodex Fasteners Co's current Current Ratio of 1.54 is 25% below median its 10-year median of 2.05. Over the past 10 years, this metric has ranged from a low of 1.54 to a high of 2.61. The Industrial Products industry median Current Ratio is 1.96. Rodex Fasteners Co's value of 1.54 is 21.4% below this industry median. Based on the distribution chart, Rodex Fasteners Co ranks #2070 out of 3074 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Rodex Fasteners Co has a GF Score™ of 69/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Rodex Fasteners Co's Current Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Rodex Fasteners Co ranks #2070 out of 3074 companies for Current Ratio. This places Rodex Fasteners Co in the lower half of its industry. The industry median Current Ratio is 1.96. Rodex Fasteners Co's value of 1.54 is 21.4% below this benchmark. Historically, Rodex Fasteners Co's own Current Ratio has ranged from 1.54 to 2.61 over the past decade. While the company's 10-year median is 2.05 vs. the industry median of 1.96, Rodex Fasteners Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for an Industrial Products company?
The median Current Ratio among Industrial Products companies is 1.96, based on 3,074 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Rodex Fasteners Co's current Current Ratio of 1.54 is 21.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Industrial Products industry, the median Current Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Rodex Fasteners Co's current Current Ratio is 1.54, which is 25% below median its own 10-year median of 2.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Rodex Fasteners Co stock overvalued right now?
Based on GuruFocus' analysis, Rodex Fasteners Co (ROCO:5015) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$30.16, compared to a current price of NT$21.70 — trading 28.1% below its estimated fair value. The current Current Ratio is 1.54, which is 25% below median its 10-year median of 2.05 and 21.4% below the Industrial Products industry median of 1.96. Rodex Fasteners Co's overall GF Score™ is 69/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Rodex Fasteners Co (ROCO:5015), the current Current Ratio is 1.54 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Rodex Fasteners Co (ROCO:5015) Overvalued in 2026?
Based on GuruFocus' analysis, Rodex Fasteners Co stock appears to be undervalued.
The current stock price of NT$21.70 is trading 28.1% below its estimated GF Value™ of NT$30.16.
GuruFocus considers Rodex Fasteners Co to be Modestly Undervalued.
Key valuation signals for ROCO:5015:
Current Ratio: 1.54 (25% below median its 10-year median of 2.05)
GF Value™: NT$30.16 vs. price of NT$21.70 (28.1% below fair value)
Industry Position: 21.4% below the Industrial Products median (#2070 of 3074)
No single metric tells the full story. See the ROCO:5015 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Rodex Fasteners Co Ltd manufactures and markets stainless steel wire and precision-made screws. The company is engaged in processing, manufacturing, and trading of automotive/industrial screws, precision stainless steel special industrial screws, stainless steel wires, and precision hardware/machinery components. The products of the company include tapping screws, stainless steel wire, chipboard screws, machine screws, self-drilling screws, socket screws, special screws and others.
69GF Score
Get the complete analysis for ROCO:5015
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:5015 has been successfully added to your 
